1. Product Overview
The VICTGOAL MTB Bike Helmet (Model VGA123) is designed for adult cyclists, offering enhanced protection and comfort for various cycling activities including MTB, BMX, downhill, scooter, and general outdoor sports. It features an integrally-molded design with a durable PC shell and EPS foam for double protection, a removable sun visor, magnetic goggles, 13 air vents for scientific ventilation, and an integrated LED safety taillight.
2. Setup and Adjustment
2.1 Measuring Head Circumference
Before using your helmet, ensure you have the correct size. The helmet is designed for L (57-62cm) head circumference.
- Use a soft tape measure or string.
- Measure the circumference of your head, keeping the tape measure just above your ears and level front to back.
- This measurement should correspond to the widest part of your head.
2.2 Helmet Fit Adjustment
Achieving a secure and comfortable fit is crucial for safety.
- Rotary Button Adjuster: Located at the back of the helmet, this stable and convenient dial allows you to easily rotate and adjust the tightness of the helmet for a snug fit.
- Quick-Release Buckle: The chin strap features a quick-release buckle for easy fastening and releasing, ensuring a secure fit under your chin.
- Thickened Chin Pad: The removable and skin-friendly chin pad includes small air vents for good sweat absorption, enhancing comfort.
2.3 Sun Visor Installation and Removal
The helmet comes with a large, removable sun visor (9cm sunshade) to block out harsh sunlight and branches.
Installation Steps (1 → 2 → 3):
- Align the visor with the helmet's attachment points.
- Gently push the visor into place, ensuring all clips or tabs engage securely.
- Verify the visor is firmly attached and does not wobble.
Disassembly Steps (3 → 2 → 1):
- When removing the No. 1 hole, you must hold the A and B sides of the visor and pull out at the same time.
- Carefully detach the visor from the helmet, releasing all clips or tabs.
- Incorrect installation or removal may cause damage to the sun visor. Always follow the process.
2.4 Magnetic Goggles Attachment
The helmet includes large magnetic goggles with UV400 protection to reduce sunlight interference.
- The goggles attach magnetically to the helmet. Simply align the magnets on the goggles with the corresponding points on the helmet.
- A slight rattling or shaking sound during use is normal due to the 1.2mm movable gap designed to fit different helmet sizes.
3. Operating Instructions
3.1 LED Safety Taillight
The helmet is equipped with a bright USB rechargeable LED taillight for enhanced visibility and safety.
- Charging: The taillight is Type-C rechargeable and provides 1 hour of use when fully charged. Connect a Type-C USB cable to the charging port.
- Lighting Options: The taillight offers 6 lighting modes:
- Cycle flash
- Warning flash
- Meteor flash
- Steady on
- Fast flash
- Slow flash
- Press the button on the taillight to cycle through the modes.
4. Maintenance
4.1 Cleaning the Helmet
- Inner Padding: The helmet features removable and washable liner padding. Gently detach the padding for cleaning. Hand wash with mild soap and water, then air dry completely before reattaching.
- Outer Shell: Wipe the PC shell with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, as these can damage the helmet's finish and materials.
- Visor and Goggles: Clean the sun visor and magnetic goggles with a soft cloth and water. Do not use abrasive materials that could scratch the lens.
4.2 Storage
Store the helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the helmet, as this can deform its structure.
5. Troubleshooting
5.1 Visor Rattling
If the sun visor rattles slightly during use, this is generally normal due to the design allowing for a 1.2mm movable gap to accommodate different helmet sizes. Ensure the visor is correctly installed according to the installation steps (Section 2.3).
5.2 LED Taillight Not Functioning
- Check Battery: Ensure the taillight is charged. Connect it to a Type-C USB power source for at least 1 hour.
- Power Button: Press the power button firmly to turn on the light and cycle through modes.
- Damage: Inspect the light for any visible damage. If damaged, discontinue use.
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | MTB Road Bike Helmet Pro |
| Model Number | VGA123 |
| Brand | Victgoal |
| Material | PC Shell + EPS Foam |
| Type | Integrally-molded Helmet |
| Weight | 400g |
| Air Vents | 13 |
| Age Group | Adults (Men) |
| Head Circumference | L (57-62cm) |
| Adapted Lens | L-Size Lens (VG111) |
| LED Light Mode | Cycle flash, Warning flash, Meteor flash, Steady on, Fast flash, Slow flash |
| Certification | CE, CPSC (U.S.A 16 CFR PART 1203) |
| Usage Scenarios | MTB, BMX, downhill, scooter, outdoor sports |
7. Warranty and Support
For detailed warranty information and support, please refer to the official product documentation or contact Victgoal customer service. This helmet is certified with CE and CPSC (U.S.A 16 CFR PART 1203) standards, ensuring compliance with safety regulations.
A comprehensive user manual in PDF format is available for download. You can access it via this link: VICTGOAL Helmet User Manual (PDF).
8. User Tips
- Always ensure the helmet is properly adjusted and securely fastened before each ride. A loose helmet offers less protection.
- Utilize the LED taillight, especially during low-light conditions or night rides, to maximize your visibility to others.
- Keep the magnetic goggles clean for clear vision. Store them safely when not in use to prevent scratches.
- Regularly check the helmet for any signs of wear or damage. If the helmet has sustained an impact, even if it looks fine, it should be replaced immediately as its protective integrity may be compromised.
- The 13 air vents are designed for optimal cooling. Ensure they are not obstructed for maximum airflow.