SEamopar Bluetooth 4.0 GPS Tracker Anti-lost Alarm Tag

Contents

SEamopar Bluetooth 4.0 GPS Tracker Anti-lost Alarm Tag User Manual

Model: Bluetooth 4.0 GPS Tracker Anti-lost Alarm Tag

Brand: SEamopar

1. Introduction

This manual provides instructions for the proper use and maintenance of your SEamopar Bluetooth 4.0 GPS Tracker Anti-lost Alarm Tag. This compact device is designed to help you keep track of your valuables, pets, or even children, preventing loss through its anti-lost alarm and app-based tracking features.

The tracker connects to your smartphone via Bluetooth 4.0 and utilizes the "iSearching" app for all its functionalities, including real-time location tracking and triggering alarms.

2. Safety Information

⚠ WARNING: INGESTION HAZARD

  • This product contains a button cell or coin battery.
  • DEATH or serious injury can occur if ingested.
  • A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours.
  • KEEP new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • Keep in original package until ready to use.
  • Immediately dispose of used batteries and keep away from children. Do NOT dispose of batteries in household trash.

FCC Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3. Package Contents

  • Bluetooth 4.0 GPS Tracker Anti-lost Alarm Tag (quantity as per purchase, e.g., 1pcs, 2pcs, 5pcs)
  • User Manual (PDF version available for download)

4. Specifications

Feature Description
Dimensions 38mm x 38mm x 7mm (1.52 inch x 1.52 inch x 0.24 inch)
Material ABS
Connectivity Bluetooth 4.0
Battery Type CR2032 (Button Cell)
Battery Life > 10 months standby
App Compatibility iOS, Android 4.3 and later (Bluetooth 4.0 required)
Waterproof No
Range Other (typically up to 15 meters for alarm)
Dimensions of the GPS tracker
Figure 1: Device Dimensions (1.52 inch x 1.52 inch x 0.24 inch)

5. Setup Guide

  1. Remove Insulating Strip: Before first use, locate the small insulating strip on the side of the tracker and gently pull it out. This activates the battery.
    Removing the insulating strip from the tracker
    Figure 2: Remove the insulating strip before use.
  2. Download the "iSearching" App:

    Scan the QR code below or search for "iSearching" in your device's app store (Google Play Store for Android, Apple App Store for iOS).

    QR code for iSearching app download
    Figure 3: QR Code for iSearching App Download
  3. Power On the Device: Hold down the power button on the tracker for three seconds. The device is powered on when a beep is heard.
  4. Connect via App: Open the "iSearching" app on your smartphone. The app will search for nearby devices. Select your device from the list and click "Connect".
    Screenshot of iSearching app showing device connection
    Figure 4: App Connection Interface

6. Operating Instructions

Once connected, your Bluetooth tracker offers several functionalities:

  • Finding Your Items: If you misplace an item attached to the tracker, open the "iSearching" app and double-tap the button within the app. The tracker will beep to help you locate it quickly.
    Diagram showing app locating a tracker with sound
    Figure 5: Locating items using the app's alarm function.
  • Anti-Lost Alarm: Keep the "iSearching" app running in the background. If the tracker disconnects from your phone (e.g., if the item moves out of Bluetooth range), both your phone and the tracker will ring to alert you, preventing loss. This feature is effective for distances up to approximately 15 meters.
    Diagram illustrating automatic alarm when tracker is over 15 meters away
    Figure 6: Automatic alarm when the tracker is out of range (over 15 meters).
  • App Breakpoint Positioning: When the anti-lost device disconnects from your phone, the app records the last known location on a map. This allows you to see where your item was last detected, aiding in recovery.
    Image showing the tracker and a smartphone displaying a map with a location pin
    Figure 7: App Breakpoint Positioning showing the last known location on a map.
    Image showing the tracker and a smartphone displaying a map with a location pin
    Figure 8: App Breakpoint Positioning showing the last known location on a map.

The tracker is versatile and can be used for various items:

Collage of images showing the tracker used for car keys, purses, pets, suitcases, and general car tracking
Figure 9: Suitable for various locations and items, including car keys, purses, car positioning, pets, suitcases, and keys.
Collage of images showing the tracker used for car keys, purses, pets, suitcases, and general car tracking
Figure 10: Versatile use for car driving, purses, car positioning, pets, suitcases, and keys.
Image of a tracker attached to a car key
Figure 11: Tracker attached to a car key.
Image of a tracker attached to a handbag
Figure 12: Tracker attached to a handbag.

Video 1: Demonstration of the Bluetooth tracker's features and usage.

7. Maintenance

  • Battery Replacement: The tracker is powered by a CR2032 button cell battery. When the battery is low, the device's performance may degrade. To replace the battery, carefully open the device casing (refer to the PDF manual for detailed instructions if needed), remove the old battery, and insert a new CR2032 battery with the correct polarity. Ensure the casing is securely closed afterward.
  • Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

  • Device not powering on:
    • Ensure the insulating strip has been completely removed.
    • Check if the CR2032 battery is inserted correctly and has sufficient charge. Replace if necessary.
    • Press and hold the power button for at least 3 seconds.
  • Cannot connect to the app:
    • Make sure Bluetooth is enabled on your smartphone.
    • Ensure the tracker is powered on and within Bluetooth range of your phone.
    • Restart both the tracker and the "iSearching" app.
    • Check if your phone's operating system is compatible (iOS or Android 4.3+ with Bluetooth 4.0).
  • Alarm not sounding:
    • Verify that the "iSearching" app is running in the background on your phone.
    • Check your phone's volume settings.
    • Ensure the tracker's battery is not depleted.
  • Inaccurate location tracking:
    • The device uses Bluetooth for proximity tracking and relies on your phone's GPS for map location when disconnected. Ensure your phone's GPS is active and has good signal.
    • "App Breakpoint Positioning" shows the last known location where the tracker was connected to your phone, not real-time GPS tracking of the tracker itself.

9. User Tips

  • For optimal performance of the anti-lost alarm, ensure the "iSearching" app is always running in the background on your smartphone.
  • Regularly check the battery status through the app to avoid unexpected power loss.
  • Attach the tracker securely to items to prevent it from falling off.
  • While useful for pets, remember this is a Bluetooth tracker, not a full GPS tracker, so its range is limited to Bluetooth connectivity with your phone.

10. Warranty and Support

For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

You can also contact SEamopar customer support for assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.