Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your IRALAN Wireless Ceiling Fan with Light. Please read this manual thoroughly before installation and keep it for future reference. This ceiling fan light is designed for versatility, featuring a durable ABS construction, three-color dimmable LED lighting, 6 wind speeds, a timing function, and a low-noise DC motor. It supports remote control and app control for convenient daily use.
Safety Rules
- To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning.
- All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device.
- WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "Acceptable for Fan Support of 45kg (99.12 lbs.) Or Less" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of light fixtures are not acceptable for fan support and may need to be replaced. Due to the complexity of the installation of this fan, a qualified licensed electrician is strongly recommended.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45KGS. Use only UL Listed outlet boxes marked FOR FAN SUPPORT.
- The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
- Avoid placing objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is suitable for indoor use only.
Tools Required
- Phillips screwdriver
- Flat blade screwdriver
- Step ladder
- Wire stripper
- Electrical tape
Package Contents
Unpack your fan and check the contents. You should have the following:
- Hanger
- Motor
- Motor shell
- Blade (3 pieces)
- Blade screws (6 pieces)
- Decorative cover
- Receiver
- Remote control
- Installation information (1 piece)
- Explosion screw (4 pieces)
- Gasket (6 pieces)
- Self-tapping screws (4 pieces)
For a visual guide to the components, please refer to the installation video below.
Setup and Installation
Before starting, ensure all power is disconnected at the circuit breaker. A qualified licensed electrician is recommended for installation.
Installation Video Guide
This video demonstrates the unboxing and installation process for the ceiling fan.
Mounting Bracket Installation
Ensure the hanging location allows for a blade clearance of 7.5 feet (2.3 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.
- For Concrete Ceiling: Mark the location, drill two holes, and secure the mounting bracket with the provided expansion screws. Tighten the screws.
- For Wood Ceiling: Mark the location and secure the mounting bracket to the building structure with four wood screws.
NOTE: The hanger must be able to withstand a weight of 45 kgs or more after installation.
Fan Assembly (without lamp)
- Install the blade: Lock each fan blade onto the motor with screws. Ensure the side marked "THIS SIDE UP" faces upwards.
- Install the decorative cover: Tighten the decorative cover onto the motor.
- Complete the installation.
Fan Assembly (with lamp)
- After locking the blade, install the lamp kit. (Do not install the blade in the opposite direction).
- After locking the lamp kit, insert the LED wire ends.
- Rotate the glass cover to the right to tighten it and check for looseness.
For detailed visual instructions, please refer to the installation video.
Electrical Connections
Make wiring connections from the house and the motor to the remote receiver as shown in the diagram below. Ensure the remote receiver matches the same code control.
Wiring diagram for connecting the ceiling fan to the remote receiver and house power.
Note: The remote receiver must match the same code control as the remote. Ensure all connections are secure and properly insulated.
Operating Instructions
Remote Control Functions
Remote control layout and functions.
- All off: Turns off all fan and light functions.
- Timing: Sets a timer for fan operation (e.g., 1H, 2H, 4H).
- Fan 1-6 gears: Adjusts fan speed from 1 (low) to 6 (high).
- Brightness +/-: Adjusts the brightness of the LED light (0%-100% adjustable).
- Color temperature: Cycles through 3 light colors: Warm (2700K), Natural (4000K), and White (6500K).
- Sleep Mode: Activates a quiet, low-speed fan mode.
- Light switch: Turns the LED light on/off.
- Positive and negative rotation: Changes the direction of fan blade rotation (Summer Mode: downward air; Winter Mode: upward air).
- The remote control uses two 1.5V batteries (not included).
Remote Control Pairing (Warm Tips)
The remote control and receiver are paired using a learning code. To pair:
- Within 5 seconds of the controller being powered on, press and hold the 'total key' (likely the 'All off' button or a dedicated pairing button) on the remote for about 5 seconds.
- When you hear a beep, it indicates successful learning.
- After successful learning, press a gear button to use it normally.
Note: If powered on for more than one minute, learning will not be accepted. If the remote does not control the fan and lights, replace the battery and re-program the remote.
App Control
The fan also supports app control. Follow these steps to set up app control:
Steps for setting up app control on iOS/Android devices.
- Step 1: Turn off the lights first.
- Step 2: Scan the QR code to download the app (works with iOS/Android system).
- Step 3: Click "+" to add a new device.
- Step 4: Control the device classification and set the name of the lamp (e.g., "Fan Light").
- Step 5: Turn on the light.
- Step 6: Turn on the matching button in order to ensure that the application successfully controls the device. Click the 'flash' button within 5 seconds of the device being powered on. If the device flashes or beeps, it means the phone and the device are successfully matched and the lamp can be controlled through the application.
Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan. Always ensure power is off before performing any maintenance.
- Cleaning: Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
- Screw Tightness: Periodically check and tighten all screws on the motor housing, blade brackets, and mounting bracket to ensure they are snug.
- Light Kit: If using a light kit, ensure the screws securing the glassware are tight and that the light bulb is secure.
Troubleshooting
Fan Will Not Start
- Check circuit fuses or breakers.
- Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off.
- If the fan is powered on, and pressing the remote control does not respond (and the fan beeps), do not press the remote control multiple times. Turn off the power immediately, and check whether the wire between the motor and the receiver is loose. Or remove and re-install.
Fan Sounds Noisy
- Make sure all motor housing screws are snug.
- Make sure the screws that attach the fan blade bracket to the motor hub are tight.
- Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing. CAUTION: Make sure main power is off.
- Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this time.
- If using an optional light kit, make sure the screws securing the glassware are tight. Check that light bulb is also secure.
- Some fan motors are sensitive to signals from solid-state variable speed controls. If you have installed this type of control, choose and install another type of control.
- Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
If the above methods do not solve the problem, please contact the manufacturer.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | SM-FAN |
| Item Type | Ceiling Fans |
| Installation Method | Assembly |
| Body Material | ABS, Iron |
| Control Method | Remote Control |
| Switch Type | Remote Control |
| Light Source | LED bulbs |
| Features | 3 colors light, 6 wind speeds, timing function, low-noise engine, adjustable length, app control |
| Is Dimmable | No (Brightness is adjustable, but not explicitly 'dimmable' in the traditional sense of continuous dimming, rather 0-100% adjustable) |
| Is Bulbs Included | No (LED light source is integrated) |
| Is Batteries Included | No (for remote control) |
| Nominal Voltage | 120V-240V |
| Power Source | AC |
| Luminous Flux | 249-2000 (Lumens) |
| Application Space | 10-20㎡ (Recommended Room: 12ft x 12ft to 18ft x 18ft) |
| Size | 42inch/52inch |
| Weight | 4.107/4.69kg |
| Certification | CCC, CE |
Warranty and Support
The product comes with a 2-year warranty.
For customer service and after-sales support, please contact:
Email Address: sxdsltd@163.com
You can also refer to the official user manual PDF for additional information: User manual (PDF)
User Tips
- When installing the blades, ensure the side marked "THIS SIDE UP" is correctly oriented to ensure proper airflow and balance.
- If the remote control is unresponsive, first check and replace the batteries before attempting to re-pair it with the receiver.
- Utilize the reversible motor function to optimize comfort year-round: Summer Mode for downward airflow to create a cooling breeze, and Winter Mode for upward airflow to circulate warm air.
- Take advantage of the 6 wind speeds to customize airflow to your preference, from a gentle breeze to a powerful circulation.
- The 3-color light feature allows you to adjust the ambiance of your room. Experiment with warm, natural, and white light settings to suit different activities or times of day.