FEELWORLD F6 PLUS V2

Contents

FEELWORLD F6 PLUS V2 6 Inch Camera DSLR Monitor User Manual

Model: F6 PLUS V2

1. Introduction

Thank you for purchasing the FEELWORLD F6 PLUS V2 6-inch Full HD touchscreen monitor. This manual provides detailed instructions for setting up, operating, and maintaining your device. Please read it carefully before use to ensure a great experience.

Safety Precautions

  • Avoid heavy impact and dropping the product.
  • The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
  • Keep the product away from heat sources and prolonged exposure to direct sunlight to prevent damage to the LCD screen.
  • Do not attempt to disassemble or repair the unit yourself. There are no user-adjustable components inside.
  • To maintain the LCD screen and protect the cover, follow these guidelines:
    1. Do not hit the screen with hard objects.
    2. Do not force wipe the screen.
    3. Do not use chemical solutions or spray detergents directly on the screen.
    4. Do not write or stick anything on the screen.
    5. Wipe the screen gently with a clean, soft cloth, ensuring no water remains on the screen.

2. Key Features

  • 6-inch 1920x1080 Full HD IPS screen with 367 PPI, 1000:1 high contrast, Rec.709 color gamut, and 160° viewing angle.
  • Touch screen menu operation for intuitive control.
  • Supports 3D LUT Log to REC.709 conversion and user 3D LUT upload (up to 32).
  • Advanced monitoring functions: Waveform, Vector scope, RGB Histogram, Focus Assist, Monochrome, Peaking Filter, False Colors, Ratio Marker, Embedded Audio, Check Field, Image Flip, Zoom-in, Exposure, Nine Grid, Anamorphic Mode, Pixel-to-Pixel.
  • Supports screenshots and image overlay function.
  • Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F & LP-E6 dual-purpose battery slot.
  • Stereo Earphone output.
  • DC 8V power out to power your DSLR or mirrorless camera.
  • Light and slim design, weighing only 235g.

3. Product Overview & Setup

3.1 Package Contents

The FEELWORLD F6 PLUS V2 package includes:

  • FEELWORLD F6 PLUS V2 Monitor
  • Micro HDMI Cable
  • Tilt Arm
  • Sunshade
  • Operation Manual (this document)
FEELWORLD F6 PLUS V2 product box with monitor, micro HDMI cable, tilt arm, sunshade, and manual

Figure 3.1: Product and Included Accessories

3.2 Physical Layout

The F6 PLUS V2 features a compact and lightweight design, making it highly portable for field use.

FEELWORLD F6 PLUS V2 monitor with dimensions: 148mm width, 93mm height, 20mm thickness, weighing 235g

Figure 3.2: Monitor Dimensions and Weight

Front Panel

The front panel features the 6-inch Full HD IPS touchscreen display.

Back Panel

The back panel includes the dual-purpose battery plate for NP-F and LP-E6 batteries.

Back of the FEELWORLD F6 PLUS V2 monitor showing the dual battery plate compatible with Sony NPF Series and Canon LP-E6 batteries

Figure 3.3: Dual-Purpose Battery Plate

3.3 Button and Port Instructions

Top Buttons

Top view of the monitor showing the power/touch button and menu wheel

Figure 3.4: Top Buttons

  • ↺ / TOUCH: Long press to turn the monitor on/off. Short press to toggle the screen touch function on/off.
  • MENU: Long press to open the main menu. Short press to open the shortcut menu. Rotate the wheel to select a menu item, then press it again to open the corresponding menu function.

Bottom Ports

Bottom view of the monitor showing SD Card slot, DC IN 12V, 3.5mm earphone slot, and DC IN 5V Type-C port

Figure 3.5: Bottom Ports

  • SD Card: SD card slot for 3D LUT upload and firmware upgrades.
  • DC IN 12V: DC power input (7~24V).
  • 3.5mm Earphone Slot: Stereo earphone output.
  • DC IN 5V (Type-C): Power input from a power bank or mobile phone charger (at least 5V/2A). This port is for power supply only, not data transmission, and does not provide loop-out power.

Left Ports

Left side of the monitor showing HDMI IN, HDMI OUT, and DC OUT 8V ports

Figure 3.6: Left Ports

  • HDMI IN: HDMI signal input, up to 4K@60Hz.
  • HDMI OUT: HDMI signal output, up to 4K@60Hz.
  • DC OUT 8V: DC power output interface (polarity: center positive) for powering your camera with a separately available DC coupler via adapter (e.g., NP-FW50 for Sony, LP-E6 for Canon, DMW-BLF19 for Panasonic).

3.4 Power Supply

The monitor offers flexible power options:

  • Battery Plate: The rear cover is equipped with a dual-purpose battery plate compatible with Sony F970 series (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530) and Canon LP-E6 series batteries.
  • DC IN 12V: Connect a 7~24V DC power adapter to the barrel input at the bottom.
  • Type-C 5V: Connect a power bank or mobile phone charger (at least 5V/2A) to the Type-C port at the bottom.

Important Note on Batteries:

  • It is recommended to use standard original F970 batteries.
  • Different battery specifications will result in varying working times.
  • If the monitor is not in use for a long time, please remove the battery.

3.5 Mounting the Monitor

The F6 PLUS V2 features three 1/4"-20 thread points (top, bottom, and right side) for versatile mounting options.

Tilt Arm Mounting

The included Tilt Arm allows you to secure the monitor to your camera via a shoe mount or 1/4"-20 thread. The Tilt Arm provides 180° of tilt for flexible viewing angles and includes a cold shoe for attaching accessories like microphones or LED lights.

Diagram showing the tilt arm components and how it attaches to a camera's hot shoe mount, allowing 360-degree rotation

Figure 3.7: Tilt Arm Mounting

Flexible Installation

The 1/4" mount points allow installation on various camera rigs, handheld stabilizers, or directly on top of your camera as an HD viewfinder. The image flip function can be used to maintain correct screen orientation when mounted upside down.

Images showing the monitor mounted on a camera rig and a gimbal, demonstrating flexible installation options

Figure 3.8: Monitor Mounted on Camera and Gimbal

3.6 Sunshade Installation

The portable sunshade helps reduce glare and provides a better viewing experience, especially outdoors.

Components of the sunshade: sunshade frame and sunshade hood

Figure 3.9: Sunshade Components

  1. Lock the Sunshade Frame securely onto the monitor.
  2. Open the sunshade hood and align the sticker on its inside with the marked part of the sunshade frame.
  3. Smooth and press the three sides of the sunshade onto the frame to complete the installation.
Monitor with sunshade attached, in use outdoors, showing improved visibility

Figure 3.10: Monitor with Sunshade in Use

4. Operating Instructions

4.1 Initial Power On

After connecting the monitor to a power supply, the indicator light will turn red. The monitor defaults to automatic power-on. Once powered on, the indicator turns yellow. When an HDMI signal is input, the indicator will turn green.

You can set the power-on mode to 'Manual' in the 'System > Power' settings. If set to Manual, you will need to long press the ↺ / TOUCH button to turn on the monitor after plugging in the power supply.

4.2 Menu Operation

Touch Screen Controls

Hand interacting with the touchscreen menu of the FEELWORLD F6 PLUS V2 monitor

Figure 4.1: Touchscreen Menu Interaction

  • Main Menu: Double-click on the screen to open the main menu (displayed on the left side). Click on a menu item to show its secondary menu. Select options by clicking directly. Click anywhere on the touchscreen to exit the menu.
  • Shortcut Menu: When the main menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left or right to select a function, then click the corresponding box to toggle it on/off.
  • Quick Adjustments: When no menu is displayed, the left half of the screen (1/2 split screen) allows direct adjustment of screen backlight brightness. The right half allows direct adjustment of volume.

MENU Wheel Operation

  • Quick Adjustments: When no menu is displayed, rotate the MENU wheel to directly adjust volume or backlight.
  • Menu Navigation: Gently press the MENU wheel to open the main menu. Rotate the wheel to select a secondary function menu. Press the wheel again, then rotate to select or set an option.
  • Exit Menu: Long press the MENU wheel to return or exit the menu.

4.3 Monitoring Tools

The F6 PLUS V2 offers a comprehensive suite of monitoring tools to assist with accurate exposure and focus.

Icons representing various monitoring tools: Vector Scope, Auto Mirror, Anamorphic Mode, Peaking Filter, False Colors, Ratio Marker, Embedded Audio, Check Field, Waveform, 3D LUT, Histogram, Pixel-to-Pixel, Image Flip, Zoom-in, Exposure, Nine Grid

Figure 4.2: Monitoring Tool Icons

Assist Functions

  • Waveform (RGB, YUV, Y): Displays overall brightness and checks lighting evenness. Position X/Y (0-100) and Waves Trans. (Off, 25%, 50%, 75%) are adjustable.
  • Vector Scope: Shows image saturation and pixel distribution on the color spectrum. Position X/Y (0-100) are adjustable.
  • Histogram (RGB1, RGB2, Y): Displays color tone distribution and exposure status. Position X/Y (0-100) are adjustable. Y Histogram checks picture brightness.
  • Focus Assist (Peaking): Highlights in-focus areas (Red, Green, Blue) with adjustable peaking level (1-10).
  • Zebra Pattern: Fills areas exceeding a set threshold (10-100) with a striped pattern to indicate overexposure.
  • False Colors: Displays an image with colors representing different exposure levels.
  • Check Field (Red, Green, Blue, Mono): Quickly adjusts hue and saturation.
  • Embedded Audio: Displays audio level meters (Position X/Y 0-100).

Image Adjustment Functions

  • Scan Mode (Under Scan, Over Scan): Adjusts how the image fills the screen.
  • Aspect Ratio (Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen): Matches various camera anamorphic lenses.
  • Anamorphic (1.33X, 1.6X, 2.0X, 2.0X MAG, User): De-squeezes anamorphic footage. User mode is customizable (1.20X-2.00X).
  • Image Flip (H Flip, V Flip, H_V Flip): Flips the image horizontally, vertically, or both.
  • Zoom Mode (2X, 4X, 9X, 16X, User): Magnifies a portion of the image for high-quality close-up. User mode is customizable (100%-200%).
  • Image Freeze: Freezes the current frame.
  • P2P (Pixel-to-Pixel): Displays the image from the 1:1 signal source without scaling.

Markers & Grids

  • Grids: Displays various grid patterns (2x2, 3x3, 4x4, 5x5, 6x6, 7x7, 8x8, 9x9, Custom) with adjustable rows (2-9) and columns (2-9).
  • Safe Frames (80%, 85%, 90%, 93%, 96%, 2.35:1, 9:16): Displays safe area guides.
  • Center Marker: Displays a crosshair in the center of the screen.
  • Ratio Marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16, 1:1): Displays various aspect ratio markers.

4.4 User Options & System Settings

LUT (Look Up Table)

The monitor supports 3D LUTs for color calibration and real-time preview. It includes built-in S-log2/3, V-log, Log-C, etc., to convert log mode to REC709. User creative 3D LUT cube files can be imported via SD card (up to 32 files).

Monitor screen showing a split view of an image before and after applying a 3D LUT

Figure 4.3: 3D LUT Application

HDR Monitoring

The F6 PLUS V2 has built-in HLG 2020, HLG 709, HLG P3 HDR 3D LUT, and Rec709 De-slog3 LUTs. It can display HDR signals for enhanced clarity and detail, simplifying log and HDR workflows.

Monitor screen showing a split view of an image before and after HDR processing, highlighting improved dynamic range

Figure 4.4: HDR Monitoring

Display Adjustment

  • Backlight: 0-100 (default 80)
  • Brightness: 0-100 (default 50)
  • Contrast: 0-100 (default 50)
  • Saturation: 0-100 (default 50)
  • Tint: 0-100 (default 50)
  • Color Temp.: 5600K, 6500K, 9300K, User (customizable RGB values 0-255)
  • Display Range (Auto, Limit, Full): Selects the grayscale range (16-235 for Limited, 0-255 for Full). Adjust this if dark parts are unclear or the picture appears gray.

System Settings

  • User Switch (1-4): Save and quickly recall up to four custom menu settings.
  • Language: Select from Japanese, French, German, English, Simplified Chinese, Brazilian Portuguese, Latin American Spanish, Traditional Chinese Style, Korean, Italian, Russian.
  • OSD Time (Off, 15Sec, 30Sec, 45Sec): Sets how long the menu stays on screen.
  • OSD Trans (Off, 25%, 50%, 75%): Adjusts the transparency of the menu background.
  • EDID Settings (2.0, 1.4): Compatible with different camera/device resolutions. Default to 2.0. If set to 1.4 manually, and then a 4K60 signal is input, you may need to set it back to 2.0.
  • Volume: Adjusts speaker volume.
  • Power on (Auto, Manual): Configures monitor power-on behavior.
  • Reset: Resets all settings to original factory defaults.
  • Firmware Update: Allows for firmware updates via SD card.

5. How to Load 3D LUT Files

The F6 PLUS V2 supports importing custom 3D LUT files to enhance your workflow.

5.1 SD Card Preparation

  • Format: The SD card must be formatted to FAT32 or NTFS. For MAC systems, use MS-DOS (FAT) format.
  • File Limit: Maximum of 32 LUT files can be loaded.
  • File Requirements:
    • LUT file format suffix must be .cube.
    • Single file size should not exceed 7.9MB.
    • Supports LUT-3D-Sizes: 17, 32, 33, 64, 65.
    • LUT file names must consist of English or Arabic numerals only.

5.2 Loading Steps

  1. Ensure the SD card is correctly inserted into the monitor's SD card slot.
  2. Navigate to the main menu: User Option > LUT > LUT Import > Confirm. The monitor will automatically detect the SD card.

Loading Status Messages:

  • No SD Card: If no SD card is detected, the screen will show "failed". Try again or restart the monitor.
  • SD Card Present, No Valid LUT: If an SD card is present but contains no valid LUT files, the monitor will erase existing user LUTs and show "Initializing", then "clean up".
  • Valid LUT Files: If valid LUT files are found, the monitor will load them and display "[n] name", where [n] is the quantity number and "name" is the LUT file's name. Upon successful loading, the screen will show "complete[n]".

6. Screenshots and Image Overlay

The monitor supports capturing screenshots and overlaying images for comparison.

6.1 Capturing and Overlaying Images

Tip: Use an empty SD card or one without upgrade files. Do not remove the SD card while using this function.

  1. After turning on the monitor and inserting an SD card, input your video signal.
  2. Swipe your finger to the left on the right side of the screen to display the screenshot function menu. Tap any position on the screen to hide the menu.
  3. Click the camera icon to capture the desired image.
  4. Click the gallery icon to browse all captured images. Use the < or > icons to navigate pages.
  5. To delete an image, select it, then click the trash can icon and follow the prompt.
  6. Double-click the image you want to overlay. Once overlaid, click anywhere on the screen to display icons for adjusting transparency and turning off the overlay.
  7. Click the 'X' icon to close the overlay function.
  8. Use the ▲/▼ controls to adjust image transparency (1-10).
Monitor screen showing multiple captured images in a gallery view, with options to capture, browse, and delete

Figure 6.1: Screenshot Gallery and Overlay Controls

7. Specifications

ParameterValue
Panel Size6" Touch Screen
Resolution1920 × 1080 pixels
Dot Pitch0.069 (H) × 0.069 (V) mm
Pixel Density367 PPI
Aspect Ratio16:9
Brightness450 cd/m²
Contrast1000:1
Viewing Angle80°/80°(L/R) 80°/80°(U/D)
BacklightLED
Adjustable BacklightYes
InputHDMI
OutputHDMI, 3.5mm stereo headphone jack
Power InDC IN 12V (Barrel 5.5mm outer, 2.1mm inner), DC IN 5V (Type-C)
Power OutDC OUT 8V (Barrel 5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera)
HDMI Input/Output Support Format480i/480p/576i/576p
720p(60/59.94/50/30/29/25/24/23.98)
1080i(60/59.94/50)
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
3840×2160p (60/50/30/29.97/25/24/23.98)
4096×2160p (60/50/30/29.97/25/24/23.98)
Power Input Voltage7~24V
Power Consumption≤8W
Unit Size (mm)148L x 93H x 20D (mm)
Unit Weight235g
Mount Points(3) ¼¼-20 thread points (top, bottom, right sides)
Working Temperature-20°C ~ 50°C
Storage Temperature-30°C ~ 60°C

8. Troubleshooting

8.1 Only Black and White or Monochrome Picture

  1. Check saturation, brightness, and contrast adjustments in the menu.
  2. Verify that the "Monochrome" function is not enabled.

8.2 No Image After Power On

  1. Check if the signal cable connection is secure and in good condition.
  2. Ensure you are using the standard adapter to connect the monitor. If using battery power, check if the battery is fully charged.

8.3 No Earphone Sound

  1. Check if the Volume control is enabled. Press the volume button and try to increase the volume.

If you encounter any other issues, please contact customer support for assistance.

9. User Tips

  • Battery Management: For extended shoots, consider carrying multiple fully charged batteries or a high-capacity power bank to utilize the Type-C 5V input. Remember to remove batteries during long periods of inactivity.
  • Custom LUTs: Experiment with different 3D LUTs to achieve your desired color grading directly on set. Ensure your LUT files are correctly formatted and named for successful import.
  • Touchscreen vs. Buttons: While the touchscreen offers quick access, the physical MENU wheel and ↺/TOUCH button provide reliable control, especially in challenging conditions or when wearing gloves.
  • Outdoor Visibility: Always use the included sunshade when shooting outdoors to minimize glare and improve screen visibility.
  • Powering Your Camera: Utilize the DC OUT 8V feature with an appropriate dummy battery to power your camera directly from the monitor, simplifying your rig and reducing battery changes.

10. Warranty and Support

FEELWORLD is continuously improving product features and performance. Specifications are subject to change without prior notice.

For technical support, warranty claims, or further assistance, please refer to the official FEELWORLD website or contact your retailer.

Video 10.1: FEELWORLD F6 PLUS V2 Product Demonstration

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.