1. Introduction
Thank you for purchasing the Shunmaii AK-170 HiFi Stereo Audio Power Amplifier. This compact and powerful amplifier is designed to deliver clear, strong, and high-fidelity audio for a variety of applications. Please read this manual carefully before using the product to ensure proper operation and to maximize its performance and lifespan.
2. Package Contents
Please check the package for the following items:
- 1 x AK-170 HiFi Stereo Audio Power Amplifier
- 1 x User Manual
3. Product Overview
The AK-170 amplifier features a durable aluminum alloy body and intuitive controls for an enhanced audio experience.
Front Panel Controls

Image: Front panel controls with blue LED lighting.
- Power Switch (ON/OFF): Turns the amplifier on or off.
- Bass Adjustment (-10 to +10): Adjusts the low-frequency audio output.
- Total Volume Adjustment (MIN to MAX): Controls the overall audio output level. Features a large knob with blue LED lights.
- Treble Adjustment (-10 to +10): Adjusts the high-frequency audio output.
Rear Panel Connections

Image: Rear panel connections for audio input, speaker outputs, and power.
- Audio Signal Input (AUDIC INPUT - L/R RCA): Connect your audio source (e.g., CD player, smartphone, computer) using RCA cables.
- Right Channel Output (4-16Ω SPEAKER): Connect your right speaker to these terminals.
- Left Channel Output (4-16Ω SPEAKER): Connect your left speaker to these terminals.
- 12V Power Input (DC 12V 2A-5A, 5.5*2.1mm): Connect the DC 12V power adapter here.
4. Setup Instructions
Follow these steps to set up your AK-170 amplifier:
- Connect Speakers: Ensure the amplifier is turned off. Connect your passive speakers to the corresponding Left and Right channel output terminals on the rear panel. Observe correct polarity (+ to + and - to -) for optimal sound quality. The amplifier supports speakers with an impedance of 4-16Ω.
- Connect Audio Source: Connect your audio source (e.g., computer, smartphone, MP3 player, TV) to the Audio Signal Input (RCA L/R) on the rear panel using appropriate RCA cables.
- Connect Power: Connect a DC 12V power adapter (2A-5A, 5.5*2.1mm plug) to the 12V Power Input jack on the rear panel. Then, plug the power adapter into a wall outlet.
- Initial Power On: Before turning on the amplifier, set the Volume knob to its minimum position.
5. Operating Instructions
- Power On: Press the Power Switch on the front panel to turn on the amplifier. The blue LED lights on the volume knob will illuminate.
- Play Audio: Start playing audio from your connected source device.
- Adjust Volume: Slowly turn the Total Volume Adjustment knob clockwise to increase the volume to your desired listening level.
- Adjust Tone: Use the Bass Adjustment and Treble Adjustment knobs to fine-tune the audio's low and high frequencies according to your preference.
- Power Off: When finished, turn the Total Volume Adjustment knob to its minimum position, then press the Power Switch to turn off the amplifier.
Wide Application

Image: The AK-170 amplifier is suitable for a wide range of audio setups.
The AK-170 amplifier is versatile and can be used in various scenarios, including:
- Home Audio Systems
- Connecting to Computers or Laptops
- Mobile Phone Audio Playback (with appropriate adapters)
- Classroom Audio Enhancement
- Car or Motorcycle Audio Systems (requires suitable 12V power supply)
- Small Outdoor Activities
- Microphone Amplification (requires a pre-amp for microphones)
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or abrasive materials, as they may damage the finish.
- Ventilation: Ensure the amplifier is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
- Storage: When not in use for extended periods, store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
- Power Off: Always turn off the amplifier and disconnect it from the power source before cleaning or when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output |
|
|
| Distorted sound |
|
|
| Blue LED lights not on |
|
|
8. Specifications
| Feature | Specification |
|---|---|
| Model | AK-170 |
| Colour | Black |
| Material | Aluminum alloy |
| Input Voltage | 12V DC |
| Effective Power | 20W + 20W |
| Maximum Power | 200W + 200W |
| Channels | 2-CH (2.0) |
| Load Impedance | 4-16Ω |
| Signal to Noise Ratio | >70 decibels |
| Frequency Response | 20Hz-20kHz |
| Distortion Rate | 0.01% |
| Product Dimensions (L*W*H) | 125mm * 75mm * 40mm |
| Product Weight | 200g |
| Package Weight | 250g |

Image: Product dimensions.
9. User Tips
No specific user tips from reviews or Q&A are available at this time. For best performance, ensure all connections are secure and use a stable 12V DC power supply.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.