Introduction
Thank you for choosing the GGBEE PIR Motion Sensor Cabinet Light. This intelligent LED night light is designed to provide convenient, automatic illumination in various areas of your home, such as cabinets, hallways, and bedrooms. Its motion-sensing capabilities and battery-powered design offer a wireless and energy-efficient lighting solution.

Image: GGBEE LED Motion Sensor Light installed in a cabinet, demonstrating warm and cool white light options.

Image: Close-up view of the light, showing the PIR motion sensor and LED.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Mini LED Night Light |
| Model Number | PIR Motion sensor Cabinet Light |
| Type | Under Cabinet Light |
| Material | ABS |
| Power | 0.5W |
| Luminous Flux | 30LM |
| Power Source | DRY BATTERY (3*AAA batteries, not included) |
| Is Bulbs Included | Yes |
| Is Dimmable | No |
| Power Generation | Motion (PIR Sensor) |
| Motion Sensor Range | 3-5 meters |
| Sensor Angle | 100 degrees |
| Light Delay Out Time | Approx. 20 seconds |
| Light Color Options | Cool White (5500-6500K), Warm White (2800-3200K) |
| Unit Size (L x W x H) | 64mm x 44mm x 27mm |
| Voltage | 5V |
| Certification | RoHS, CE |
| Origin | Mainland China |

Image: Product dimensions and detailed specifications table.
Setup and Installation
The GGBEE PIR Motion Sensor Cabinet Light is designed for easy, self-contained installation using adhesive mounting. No wiring is required.
Required Items (Not Included):
- 3 x AAA batteries
Installation Steps:
- Prepare the Mounting Surface: Ensure the surface where you intend to install the light is clean, dry, and smooth for optimal adhesive performance.
- Apply Adhesive: Peel off the protective film from one side of the provided 3M adhesive pad and firmly attach it to the back of the light unit.
- Insert Batteries: Locate the battery compartment cover on the back of the light. Slide or pry open the cover. Insert 3 AAA batteries, ensuring correct polarity (+/-). Close the battery cover securely.
- Mount the Light: Peel off the remaining protective film from the 3M adhesive pad. Press the light firmly onto your desired surface for at least 30 seconds.

Image: Diagram illustrating the 3M adhesive application and battery compartment access.

Image: Step-by-step visual guide for installing the light, including battery insertion and adhesive mounting.

Image: Detail of the battery compartment, indicating where to insert 3 AAA batteries.
Operating Instructions
The GGBEE Motion Sensor Cabinet Light operates automatically based on motion detection and ambient light conditions.
- Automatic Activation: The light will automatically turn on when motion is detected within its sensing range (3-5 meters) and when the ambient environment is dark.
- Light Sensor: An integrated light sensor prevents the light from activating during daylight hours, conserving battery life.
- Automatic Deactivation: After motion is no longer detected and you move beyond its sensing range, the light will automatically turn off after approximately 20 seconds.
- Sensing Angle: The PIR motion sensor has a detection angle of 100 degrees.

Image: Visual explanation of the light's automatic functions: light sensor, motion activation, and auto-off timer.

Image: Motion sensor detection range (3-5 meters) and angle (100 degrees) diagram.
Maintenance
- Cleaning: Wipe the light unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the light output diminishes or the unit stops responding to motion, it's time to replace the batteries. Follow the "Insert Batteries" step in the Setup section to replace the 3 AAA batteries.
- Storage: If storing the light for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light turns off too quickly or stays on too long. |
|
|
User Tips
- For optimal performance, ensure the light is installed in a location where the motion sensor has a clear line of sight to the area you wish to illuminate.
- Avoid placing the light near heat sources or in direct sunlight, as this can interfere with the motion sensor's operation.
- The light is designed to activate only in dark conditions. Do not expect it to turn on in a well-lit room.
- When testing the motion sensor, walk past the light rather than waving your hand in front of it. The light will illuminate when you are within 3 meters and will turn off 20 seconds after you move beyond its sensing range.
Warranty and Support
Specific warranty details are not provided with this product. For any issues or further assistance, please refer to the seller or the platform where the product was purchased.
A digital version of the user manual is available for download: User Manual (PDF)