BAOFENG UV-5RX

Contents

Baofeng UV-5RX Walkie Talkie User Manual

Model: UV-5RX

1. Safety Information

To ensure safe and efficient operation of your Baofeng UV-5RX walkie talkie, please read the following information carefully:

  • Only qualified technicians should perform repairs. Do not disassemble the device.
  • Turn off the walkie talkie in areas where electromagnetic interference or compatibility issues may occur, such as hospitals or other healthcare facilities.
  • Turn off the walkie talkie when instructed by aircraft crew during flights.
  • Do not place the walkie talkie in areas where airbags may deploy in a vehicle.
  • Turn off the walkie talkie before entering flammable or explosive environments.
  • Do not replace or charge batteries in flammable or explosive environments.
  • Turn off the walkie talkie before entering blasting areas or areas with detonators.
  • Do not use a walkie talkie with a damaged antenna, as contact with damaged antenna may cause minor burns.
  • Avoid prolonged exposure of the walkie talkie to direct sunlight or near heating devices.
  • When transmitting, hold the portable walkie talkie vertically with the microphone approximately 5 cm from your mouth.
  • During transmission, keep the antenna at least 5 cm away from your head or body.
  • If wearing the walkie talkie on your body, ensure the antenna is at least 5 cm away from your body during transmission.

2. Product Inspection and Package Contents

Before use, please inspect the product packaging for any signs of damage. Carefully open the box and verify that all items listed below are present. If any items are missing or damaged during transit, please contact your dealer immediately.

Included Accessories:

ItemQuantity
UV-5RX Radio1
Antenna1
Li-ion Battery Pack1
Desktop Charger1
Belt Clip1
User Manual1

Note: Additional accessories like earpieces, speaker microphones, or programming cables may be included depending on the package purchased.

Baofeng UV-5RX radio and standard accessories
Figure 1: Baofeng UV-5RX radio and standard accessories (antenna, battery, charger, earpiece, belt clip, lanyard).

3. Setup

3.1. Unboxing and Overview

Watch this video for an unboxing and basic overview of your new Baofeng UV-5RX walkie talkie and its components.

Video 1: Unboxing and basic overview of the Baofeng UV-5RX radio.

3.2. Installing/Removing the Battery

3.2.1. Installing the Battery

  1. Align the battery pack with the grooves on the back of the walkie talkie.
  2. Slide the battery pack upwards until it clicks into place with the battery latch at the bottom of the radio.

3.2.2. Removing the Battery

  1. Ensure the walkie talkie is powered off.
  2. Press the battery latch in the direction indicated by the triangle until you hear a 'click'.
  3. Pull the bottom of the battery pack away from the radio and then slide it downwards to remove.

3.3. Installing/Removing the Antenna

3.3.1. Installing the Antenna

  1. Screw the threaded end of the antenna into the connector on top of the walkie talkie.
  2. Turn clockwise until it is securely tightened.

3.3.2. Removing the Antenna

  1. Turn the antenna counter-clockwise until it detaches from the radio.

3.4. Installing/Removing the Belt Clip

3.4.1. Installing the Belt Clip

  1. If needed, align the provided belt clip with the screw holes on the back of the walkie talkie.
  2. Secure it with the screws provided, ensuring it is firmly attached for convenient carrying.

3.4.2. Removing the Belt Clip

  1. Unscrew the screws holding the belt clip to the main unit and remove the clip.

3.5. Installing Audio Accessories/Programming Cable

  1. Lift the rubber cover on the side of the radio.
  2. Insert the audio accessory (e.g., earpiece, speaker microphone) or programming cable into the accessory jack.
  3. After removing the accessory, firmly close the rubber cover to prevent dust and debris from entering.
Baofeng UV-5RX radio with speaker microphone and accessories
Figure 2: Baofeng UV-5RX radio with speaker microphone and other accessories.

4. Operating Instructions

4.1. Power On/Off and Volume Control

  1. To power on, rotate the ON/OFF/Volume knob (top-left knob) clockwise until you hear a 'click' and the display lights up.
  2. To power off, rotate the ON/OFF/Volume knob counter-clockwise until you hear a 'click' and the display turns off.
  3. Adjust the volume by rotating the same knob clockwise to increase and counter-clockwise to decrease.

4.2. Channel Mode (MR) vs. Frequency Mode (VFO)

The UV-5RX operates in two main modes:

  • Channel Mode (MR): Allows you to select pre-programmed channels. Press the VFO/MR button to switch to Channel Mode. Use the Up/Down arrow keys or the keypad to select a channel.
  • Frequency Mode (VFO): Allows you to manually input frequencies. Press the VFO/MR button to switch to Frequency Mode. You can directly input frequencies using the numeric keypad.

4.3. Transmitting and Receiving

  1. Receiving: When the radio is on and tuned to an active frequency/channel, it will automatically receive incoming transmissions.
  2. Transmitting: To transmit, press and hold the PTT (Push-To-Talk) button on the left side of the radio. Speak clearly into the microphone. Release the PTT button to stop transmitting and return to receive mode.

4.4. Wireless Frequency Copy Function

The UV-5RX features a wireless frequency copy function, allowing it to detect and copy frequencies from another transmitting radio.

How to Copy Frequency on Baofeng UV-5RX
Figure 3: Step-by-step guide on how to copy frequencies wirelessly.
  1. Step 1: Turn on the device and long press the BAND keyboard button.
  2. Step 2: The screen displays "SEARCH". Press the # key to switch between UHF and VHF search bands.
  3. If the transmitter continues to transmit and the unit receives an effective frequency (the strongest and stable signal), the received frequency will be displayed.

4.5. Other Key Functions

  • MENU: Access the radio's menu for various settings. Use Up/Down arrows to navigate and MENU again to confirm.
  • EXIT: Exit from menu or current operation.
  • A/B: Switch between the upper and lower display frequencies/channels.
  • BAND: Switch between frequency bands (e.g., VHF/UHF).
  • SCAN (*): Start/stop scanning frequencies or channels.
  • SAVE (3): Save current frequency to a channel.
  • FM (Side Button): Activate FM radio receiver.
  • CALL (Side Button): Activate alarm function or call a pre-set contact.
  • Flashlight (Top Button): Toggle the built-in LED flashlight.
Close-up views of Baofeng UV-5RX radio features
Figure 4: Detailed views of the radio's top port, side buttons (SP, MIC, CALL, PTT, MONI), and front panel.

5. Maintenance

5.1. Battery Care

  • Charge the battery fully before first use.
  • Use only the specified charger for your UV-5RX.
  • Do not short-circuit the battery terminals.
  • Do not expose the battery to fire or extreme temperatures.
  • If the radio will not be used for an extended period, remove the battery.
Baofeng UV-5RX radio in charging cradle
Figure 5: Baofeng UV-5RX radio in its charging cradle.

5.2. Cleaning

  • Clean the radio's surface with a soft, damp cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure the accessory port cover is closed when not in use to prevent dust and moisture ingress.

5.3. Storage

  • Store the radio in a cool, dry place away from direct sunlight and extreme temperatures.
  • If storing for a long time, remove the battery.

6. Troubleshooting

ProblemPossible CauseSolution
Radio does not power onBattery is low or not installed correctly.Charge the battery or re-install it properly.
No sound or low volumeVolume is too low; squelch level is too high; earpiece/speaker mic faulty.Increase volume; adjust squelch level (MENU option); check/replace accessory.
Short communication rangeObstructions (buildings, hills); low battery; antenna not properly attached or damaged.Move to an open area; charge battery; check/replace antenna.
Cannot transmit or receiveWrong frequency/channel; CTCSS/DCS mismatch; radio is in scan/monitor mode.Verify frequency/channel; check CTCSS/DCS settings; exit scan/monitor mode.

7. Specifications

FeatureSpecification
Model NumberUV-5RX
Brand NameBAOFENG
Walkie Talkie TypePortable
Output Power (W)5W-10W
Maximum Range3km-5km
Is DisplayYes
Waterproof / Water-ResistantNo
Battery IncludedYes
Channels128
OriginMainland China
Dimensions (H x W x D)11cm x 5cm x 2.5cm (excluding antenna)

7.1. Frequency Ranges

  • FM: 68-108MHz (Receive only)
  • AM: 108-136MHz (Receive only)
  • UHF: 350-390MHz (Receive only)
  • VHF: 136-174MHz (Receive/Transmit)
  • UHF: 220-260MHz (Receive/Transmit)
  • UHF: 400-480MHz (Receive/Transmit)
  • UHF: 480-520MHz (Receive only)
Baofeng UV-5RX radio with multi-band frequency specifications
Figure 6: Baofeng UV-5RX radio highlighting multi-band frequency capabilities.
Comparison of Baofeng UV-5RX vs UV-5R features
Figure 7: Comparison table highlighting features of UV-5RX versus UV-5R.
Dimensions of Baofeng UV-5RX radio
Figure 8: Diagram showing the dimensions of the Baofeng UV-5RX radio.

8. User Tips

No specific user tips were available from the provided data.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or authorized distributor from whom you purchased this product. Please retain your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.