Electric Nose Hair Trimmer User Manual

1. Product Overview

The AFDEAL Electric Nose Hair Trimmer is a portable grooming device designed for safe and efficient removal of unwanted nose and ear hair. It features a high-speed motor, a 360° rotary blade, and a washable head for easy maintenance.

Figure 1: AFDEAL Electric Nose Hair Trimmer (Black and Orange variants)

2. Safety Information

• Read all instructions before using the appliance.
• Keep the appliance away from children.
• Do not immerse the main body of the trimmer in water. Only the blade head is washable.
• Ensure the product is not connected to a power source and is turned off before cleaning or performing any maintenance.
• Do not use the trimmer if the blade head is damaged, as this may cause injury.
• Do not attempt to repair the appliance yourself. Contact support if issues arise.

3. Package Contents

Please check the package for the following items:

• 1 x Nose Hair Trimmer
• 1 x Cleaning Brush
• 1 x USB Charging Cable (Type-C)
• 1 x Packaging Box

4. Setup

4.1 Initial Charge

Before first use, fully charge the trimmer. The device cannot be turned on while charging.

1. Locate the Type-C charging port at the bottom of the trimmer.
2. Connect the provided USB charging cable to the trimmer and plug the other end into a suitable USB power source (e.g., computer, wall adapter).
3. The charging icon on the display will flash to indicate charging.
4. A full charge takes approximately 40 minutes. The display will show 100% when fully charged.

Figure 2: Type-C Charging Port

5. Operating Instructions

Follow these steps for safe and effective trimming:

1. Remove the transparent dust cover from the blade head.
2. Press the power button located on the side of the trimmer to turn it on.
3. Gently bring the tip of the trimmer close to the nostril or ear. Carefully insert the trimmer into the nostril or ear canal to trim unwanted hair. Avoid inserting too deeply.
4. Move the trimmer slowly to ensure all desired hair is trimmed. The 360° rotary blade is designed to capture hair from all directions.
5. After trimming, press the power button again to turn off the device.
6. Replace the dust cover to protect the blade.

Figure 3: Trimmer in use, highlighting 360° blade action

Figure 4: How to Use Guide

6. Maintenance

6.1 Cleaning the Blade Head

Regular cleaning ensures optimal performance and hygiene.

1. Ensure the trimmer is turned off and disconnected from any power source.
2. Twist the blade head counter-clockwise to detach it from the main body.
3. Rinse the detached blade head under running water to remove hair clippings and debris. You may use the provided cleaning brush for thorough cleaning.
4. After rinsing, thoroughly dry the blade head before reattaching it.
5. Align the blade head with the main body and twist clockwise until it locks securely into place.

Figure 5: Detachable Blade Head for easy cleaning

6.2 Lubrication

Due to the rapid rotation of the blades, friction can generate heat. To maintain the cutting tool's speed and efficiency, a small amount of clipper oil (not included) can be applied to the blade mechanism periodically.

6.3 Storage

Store the trimmer in a cool, dry place with the dust cover on when not in use. Its compact size makes it easy to store or carry.

Figure 6: Compact design for portability

7. Troubleshooting

• Trimmer does not turn on: Ensure the battery is charged. Connect to the USB charger for at least 40 minutes.
• Reduced trimming performance: The blade head may be clogged with hair. Clean the blade head as described in the Maintenance section. The battery might also be low.
• Excessive pulling or discomfort: The blade head may be dull or clogged. Clean the blade head. If the issue persists, consider applying a small amount of lubricant.

8. Specifications

Figure 7: Product Dimensions

9. Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.