SEAMETAL B26

Contents

SEAMETAL B26 OBD2 Scanner User Manual

Model: B26 | Brand: SEAMETAL

Professional Bluetooth Car Diagnostic Tool for Real-Time Vehicle Health Monitoring on iOS & Android

1. Introduction

The SEAMETAL B26 OBD2 Scanner is an advanced vehicle diagnostic tool designed to provide real-time car health information directly to your iOS or Android smartphone. This device allows you to monitor various vehicle parameters, diagnose fault codes, and ensure your car is running optimally. With its user-friendly app and Bluetooth 5.1 connectivity, maintaining your vehicle's health has never been easier.

2. Safety Information

  • Always operate the device in a safe manner. Do not attempt to use the device or app while driving.
  • Ensure your vehicle is parked safely before connecting or disconnecting the OBD2 scanner.
  • Do not expose the device to extreme temperatures, moisture, or direct sunlight.
  • Keep the device out of reach of children.

3. Package Contents

  • 1 x SEAMETAL B26 OBD2 Scanner Unit
  • 1 x User Manual (this document)
SEAMETAL B26 OBD2 Scanner and its packaging
The SEAMETAL B26 OBD2 Scanner and its retail packaging.

4. Product Overview

The B26 OBD2 scanner is a compact device designed for easy plug-and-play operation. It features indicator lights to show its status.

Indicator Light Definition:

  • Red Light: Indicates that the power is on.
  • Blue Light: Indicates that the OBD device and APP are connected successfully.
  • Green Light: Indicates that the OBD device is connected to the car.
Diagram showing the SEAMETAL B26 OBD2 scanner with indicator light definitions and a smartphone displaying the YMOBD app dashboard.
Professional indicator light definitions for the B26 OBD2 scanner.

5. Specifications

Feature Description
Product Model B26
Operating Systems Android, iOS
Processor Fourth generation chip YM1140
Bluetooth Version V5.1
OBD Protocol Protocol 9 (V1.5)
Compatible Vehicle Models Most 12V gasoline cars in the United States after 1996 and in Europe after 2003
Working Voltage 5V~28V (Typical: 12V)
Working Current 5mA~30mA (Typical: 15mA)
Operation Temperature -10°C~60°C
Storage Temperature -40°C~85°C
Product Size 45mm x 50mm x 24mm (Length x Width x Height)
Material ABS
Table of product specifications including model, operating systems, processor, Bluetooth version, OBD protocol, compatible vehicles, voltage, current, temperatures, and size.
Detailed product specifications for the B26 OBD2 scanner.
Diagram showing the dimensions of the B26 OBD2 scanner: 45mm width, 24mm height, and 50mm length.
Physical dimensions of the B26 OBD2 scanner.

6. Setup Guide

6.1. Device Installation

  1. Locate your vehicle's OBD-II port. This is typically found under the dashboard on the driver's side.
  2. Plug the SEAMETAL B26 OBD2 Scanner firmly into the OBD-II port. The red power indicator light on the device should illuminate.
Video demonstrating the installation of the OBD2 scanner into a vehicle's port and initial app connection.

6.2. App Download and Connection

  1. Download the official 'YMOBD' app from your device's app store (available for iOS and Android).
  2. Ensure Bluetooth is enabled on your smartphone.
  3. Open the YMOBD app. The app will automatically search for and connect to the B26 device using Bluetooth 5.1. The blue indicator light on the device will illuminate upon successful app connection.
  4. Once connected to the app, start your car's engine. The green indicator light on the device will illuminate, signifying a successful connection to the car's system.
Image showing the SEAMETAL B26 OBD2 scanner and a smartphone displaying the YMOBD app with 'Intelligent pairing', 'Automatic connection', and 'Convenient operation' features highlighted.
The YMOBD app features intelligent pairing and automatic connection for convenient operation.

7. Operating Instructions

The YMOBD app offers a comprehensive suite of diagnostic and monitoring features. Navigate through the app to access the following functions:

Screenshot of the YMOBD app showing various diagnostic functions like Real-time vehicle data stream, Frozen frame, Diagnostic Trouble Codes, Unified Diagnostic Services, Firmware Upgrade, Custom Dashboard, Clear diagnostic Trouble codes, Oxygen sensor monitoring, Comprehensive component Monitoring, Vehicle information, One-click full vehicle diagnosis, Malfunction indicator light, I/M ready state, Trip analysis, and Vehicle performance test.
Overview of the complete functions available in the YMOBD app.

7.1. Dashboard

View real-time data such as engine coolant temperature, battery voltage, vehicle speed, and engine RPM on a customizable dashboard.

7.2. DTC Monitoring & Clearing

The app provides professional solutions for vehicle fault codes. You can perform a comprehensive scan for Diagnostic Trouble Codes (DTCs) across various vehicle systems.

  • To initiate a scan, select 'DTC Monitoring' and tap 'Start testing'.
  • If an engine fault is found, you can clear the engine fault code with one click directly from the app.
Image showing a smartphone displaying the YMOBD app with a 'One-Click Engine Fault Code Clearing' feature. It shows 'Before clear' with an engine fault light on, and 'After clearing' with the light off.
One-Click Engine Fault Code Clearing feature in the YMOBD app.

7.3. Real-time Data Stream

Access over 150 dynamic data streams to monitor real-time vehicle conditions. This includes detailed information like fuel system status, calculated load value, intake manifold absolute pressure, oxygen sensor readings, and more.

Screenshot of the YMOBD app showing a 'Real-time Data Stream' interface with various vehicle parameters and their reference ranges.
Real-time vehicle dynamic data stream reading in the YMOBD app.

7.4. Battery Monitor

Monitor your car battery's real-time voltage and perform start-up and charging tests to assess its health.

7.5. Trip Analysis & Vehicle Performance Testing

Analyze your driving trips and conduct vehicle performance tests, such as 0-60 km/h acceleration tests, to evaluate your car's performance.

7.6. Supported Protocols & Languages

The B26 scanner supports nine major OBD-II protocols and offers 25 language options for a wide range of compatibility and user convenience.

List of nine major OBD-II protocols supported by the device.
Supported OBD-II protocols.
List of 25 supported languages including English, Russian, French, Czech, Simplified Chinese, Japanese, Dutch, Thai, Traditional Chinese, Italian, Finnish, Turkish, Arabic, Hindi, Polish, Malay, Spanish, Portuguese, Bengali, Danish, Korean, German, Hungarian, Swedish, and Romanian.
25 language options available.

8. User Tips

  • For best results, ensure your vehicle's ignition is in the 'ON' position (or engine running) when performing diagnostics.
  • If you encounter connection issues, try restarting both the app and your phone's Bluetooth.
  • Regularly check for app updates to ensure you have the latest features and vehicle compatibility.
  • When clearing fault codes, understand the underlying issue first to prevent recurrence.

9. Troubleshooting

9.1. Device Not Powering On (No Red Light)

  • Ensure the device is fully inserted into the OBD-II port.
  • Check your vehicle's fuse box for any blown fuses related to the OBD-II port.
  • Verify your vehicle's compatibility (most 12V gasoline cars in the US after 1996 and Europe after 2003).

9.2. App Not Connecting (No Blue Light)

  • Make sure Bluetooth is enabled on your smartphone.
  • Restart the YMOBD app.
  • Try restarting your smartphone.
  • Ensure the device is powered on (red light is solid).

9.3. Not Connecting to Car (No Green Light)

  • Ensure your vehicle's ignition is in the 'ON' position or the engine is running.
  • Verify that the app is successfully connected to the device (blue light is solid).
  • Check if your vehicle is OBD-II compliant and falls within the supported model years.

9.4. Inaccurate Readings or App Freezing

  • Ensure the app is up to date.
  • Close and reopen the app.
  • Disconnect and reconnect the OBD2 scanner from the vehicle.
  • If issues persist, contact customer support.

10. Maintenance

  • Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Store the device in a cool, dry place when not in use.
  • Avoid dropping the device or subjecting it to strong impacts.

11. Warranty and Support

For warranty information, technical support, or any questions not covered in this manual, please refer to the seller's website or contact SEAMETAL customer service directly. Please have your product model (B26) and purchase details ready when contacting support.

You can also refer to the official user manual PDF for additional details: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.