1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your SSET A9 Mini Wireless Recorder Camcorder. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
The A9 Mini Camcorder is a compact and versatile surveillance camera featuring WiFi connectivity, night vision, and micro voice recording capabilities. It is designed for easy installation and remote monitoring via a mobile application.
Figure 1: A9 Mini Camcorder and its key features.
2. Safety and Legal Information
⚠️ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of this product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
3. Setup Guide
Follow these steps to set up your A9 Mini Wireless Recorder Camcorder:
-
Download and Install the APP
Use your mobile phone's browser to scan the QR code provided below to download and install the application. Alternatively, search for "Linklemo" in your device's app store (Apple App Store or Google Play Store) and install it.
Scan this QR code to download the "Linklemo" app.
-
Initial App Setup
Open the "Linklemo" app and register for an account to log in.
-
Prepare Your Phone for Connection
First, open your phone's Settings and successfully connect to a 2.4GHz WiFi network. Then, ensure your phone's Bluetooth is turned on.
-
Power On the Camera
Connect the MINI camera to a power supply. Press and hold the ON/OFF key for 2 seconds to turn on the power. Then, press and hold the MODE key for 6 seconds until you see the blue light flashing.
-
Pairing the Camera
At this point, the app should detect the MINI camera and prompt you to bind it. Select "Bind Now" to proceed.
-
Confirm WiFi Connection
The app will display a WiFi connection message that needs to be confirmed. Confirm the WiFi information. The app will then indicate that the device is connecting. Ensure your phone is close to the camera and the network connection is stable and unobstructed.
-
Name Your Camera
After successful connection, you will be prompted to custom name your MINI camera. Choose a name you prefer, and the connection will be completed. You can now use your MINI camera.
Figure 2: App interface for device pairing and setup.
Important: The camera must be kept powered on throughout its use; otherwise, it cannot be used normally.
4. Operating Instructions
4.1 Key Features
- WiFi Connection (2.4GHz): Enables remote control and viewing via mobile app.
- 150° Wide Angle View: Provides a broad field of vision for comprehensive monitoring.
- SD Local Memory: Supports recording directly to an SD card (not included).
- Night Vision: Equipped with dark night vision capabilities for clear recording in low-light conditions.
- Remote Viewing: Monitor live feed from your mobile phone anywhere with an internet connection.
- Long Endurance: Built-in large-capacity rechargeable battery for wireless operation.
- Loop Recording: Automatically overwrites oldest files when the memory card is full.
- Audio Recording: Captures sound along with video.
- HD Video: Records high-definition video (up to 3.0 Megapixels).
- Magnetic Body & 360° Rotating Base: Allows for flexible placement and easy installation on various surfaces.
- Record While Charging: Supports continuous recording even when connected to a power source.
4.2 Remote Monitoring via App
Once the camera is successfully paired with the "Linklemo" app, you can:
- View live video feed from the camera on your mobile phone.
- Initiate and stop video recording.
- Access recorded footage stored on the SD card or cloud (if applicable).
- Receive alerts or notifications (if configured).
Figure 3: Remote viewing and key features.
4.3 Installation Options
The A9 Mini Camcorder offers multiple installation methods:
- Wire-Free with Magnet & Bracket: Use the included magnetic base and bracket for easy positioning on flat surfaces or magnetic objects.
- Magnetic Body: The camera itself has a magnetic body, allowing it to be attached directly to metallic surfaces.
Figure 4: Multiple ways of use and installation.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid using liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the camera regularly, even if not in active use.
- Firmware Updates: Check the "Linklemo" app periodically for any available firmware updates for your camera to ensure optimal performance and security.
6. Troubleshooting
- Camera not turning on: Ensure the camera is properly connected to a power source and the battery is charged. Press and hold the ON/OFF button for at least 2 seconds.
- Cannot connect to WiFi:
- Verify your phone is connected to a 2.4GHz WiFi network (5GHz networks are not supported).
- Ensure your phone's Bluetooth is enabled during the pairing process.
- Make sure your phone is close to the camera and there are no obstructions interfering with the signal.
- Restart both your phone and the camera, then try the pairing process again.
- Camera disconnects frequently:
- Ensure the camera remains connected to a power source, as it cannot operate normally when unpowered.
- Check your WiFi signal strength at the camera's location. A weak signal can cause disconnections.
- Ensure there are no other devices causing interference on the 2.4GHz band.
- No video feed in app:
- Confirm the camera is powered on and connected to WiFi.
- Check your internet connection on your mobile phone.
- Restart the app and try again.
- Recording issues:
- Ensure an SD card is inserted correctly and has sufficient free space.
- Check the SD card's format (usually FAT32). Reformat if necessary (this will erase all data).
- Verify recording settings within the "Linklemo" app.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | SSET |
| Style | Mini Camera |
| High Definition Video | 3.0 Megapixels |
| Sensor Resolution | 1 MP |
| Lens (mm) | 3.6mm |
| Lens Quantity | Single Lens |
| Viewing Angle | 150° |
| Connectivity | WIFI (2.4GHz) |
| Power Supply | Normal (via USB cable) |
| Supported Operating Systems | App-controlled (no direct OS support for desktop viewing without app) |
| Zoom | None |
| Origin | Mainland China |
7.1 Package Dimensions
- Length: 11 cm
- Width: 6 cm
- Height: 4 cm
- Weight: 0.053 kg
8. User Tips
- Remote Recording: Yes, live video can be recorded directly to your phone via the "Linklemo" app while viewing the live feed. This provides an additional layer of recording beyond the SD card.
- Optimal Placement: Utilize the magnetic body and rotating base to find the best viewing angle and discreet placement for your surveillance needs.
- Power Continuity: For continuous operation, ensure the camera is connected to a stable power source, especially if using it for extended monitoring.
- Network Stability: A strong and stable 2.4GHz WiFi connection is crucial for reliable remote viewing and control.
9. Warranty and Support
For any technical support, warranty claims, or further inquiries, please contact the seller or refer to the official product page where you purchased the item.
A more detailed user manual in PDF format may be available. Please check the product listing or contact customer support for access to the full document: View User Manual (PDF)