1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya Wi-Fi Smart Sprinkler Timer. This device is an automatic drip irrigation controller and smart water valve designed to optimize garden watering, save water, and offer convenient remote control via your smartphone.
Important Note: This Wi-Fi version is compatible with standard Wi-Fi routers and does not require a separate hub. It uses British pipe thread (BSPP). Please ensure compatibility before installation.
2. Safety Information
- Always pay attention to the direction of the water inlet/outlet during installation and do not reverse it.
- Keep the product away from fire and heat sources. Do not expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, fire, or the like).
- Do not place magnetic materials near the equipment.
3. Package Contents
Verify that all the following items are included in your package:
- Sprinkler Timer x 1
- Inlet adapter x 1
- Outlet watering pipe adapter x 1
- User manual x 1
4. Product Overview
Familiarize yourself with the components of your Smart Sprinkler Meter:
- Water Inlet: Connects to your water source (e.g., faucet).
- On/Off & Reset Button: Used for manual control and device reset.
- Indicator: Provides visual feedback on device status.
- Battery Compartment: Houses the AA batteries.
- Water Outlet: Connects to your irrigation system (e.g., hose, sprinkler).
5. Specifications
| Feature | Detail |
|---|---|
| Power Supply | 4 x AA/LR6 1.5V batteries (replaceable) |
| Pipe Size | 3/4 inch |
| Thread Type | G, NH (optional) |
| Standby Consumption | 200uA |
| Bluetooth Version | Bluetooth 5.0 |
| Wireless Standard | IEEE 802.11b/g/n |
| Wireless Frequency | 2.4GHz |
| Wireless Distance | 45M |
| Waterproof Level | IP65 |
| Working Pressure | 0.03MPa ~ 1MPa |
| Working Temperature | -10°C ~ 60°C (14°F - 140°F) |
| Working Humidity | 1% ~ 95%RH (non-condensing) |
| Dimensions | 137mm x 126mm x 54mm |
6. Setup and Installation
6.1. Battery Installation
The device requires 4xAA standard alkaline batteries. Ensure correct polarity during installation.
- Remove the screw securing the battery compartment.
- Take out the battery compartment.
- Install 4xAA standard alkaline batteries into the terminals, observing the correct + position.
- When inserting back into the battery compartment, pay attention to the direction of the shrapnel and maintain the same orientation as the pouring switch button/indicator light.
6.2. Physical Installation
- Close the main water pipe valve.
- Install the provided accessories (inlet adapter, outlet watering pipe adapter) onto the Sprinkler Timer.
- Connect the Sprinkler Timer to your water pipe valve. Ensure the water inlet/outlet directions are correct. A 3/4 inch to 1/2 inch connector may be used if needed.
- Connect your irrigation system (e.g., hose, sprinkler) to the water outlet of the Sprinkler Timer.
- After installation, open the water pipe valve.
6.3. App Download and Registration
- Download the "Smart Life" APP:
- For Android: Search "Smart Life" on Google Play Store.
- For iOS: Search "Smart Life" on Apple App Store.
- Launch the "Smart Life" app.
- Register for a new account using your mobile phone number or email address and create a password. If you already have an account, simply log in.
6.4. Adding the Device to the App
The device is powered on in Wi-Fi mode by default. If the indicator light is off, press and hold the reset button for 6 seconds until it flashes, then select the corresponding indicator mode to add the device.
- Smart Wi-Fi Mode (Recommended): Press the reset button until the device indicator flashes quickly. Follow the APP prompts to add the device.
- AP Compatible Mode: Press the reset button until the device indicator flashes slowly. Follow the APP prompts to add the device.
Note: All Wi-Fi products can be added by selecting any Wi-Fi option. The device only supports 2.4GHz Wi-Fi signals.
7. Operating Instructions
Once your Smart Sprinkler Timer is connected to the Smart Life app, you can control and monitor your watering system remotely.
7.1. Remote Control (APP Switch On/Off)
Use the Smart Life app to remotely turn your sprinkler system on or off from anywhere, anytime.
7.2. Timed Irrigation
Set custom watering schedules based on your plants' needs. The app supports multi-period custom scheduling for daily, every other day, or cycle watering modes.
7.3. Quantitative Irrigation and Water Metering
The built-in water metering sensor accurately measures water consumption. You can set specific irrigation flow rates or volumes to ensure precise watering and save water.
7.4. Voice Control
The Smart Sprinkler Timer supports voice commands via Alexa and Google Assistant for convenient hands-free operation.
7.5. Child Lock Function
Activate the child lock feature in the app settings to disable local buttons on the device, preventing unintended operation.
7.6. Rain Delay and Reminders
Utilize the rain delay function to automatically shut off watering during rainy conditions, saving water. Set reminders for valve operations.
7.7. Family Share Function
Share control of your Smart Sprinkler Timer with family members through the app, allowing multiple users to manage the watering system.
8. Maintenance
- Battery Replacement: Replace batteries when the low power indicator flashes 3 times. Refer to section 6.1 for detailed instructions.
- Cleaning: Periodically clean the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Winterization: In freezing climates, disconnect the device from the faucet and store it indoors to prevent damage from ice.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not pairing (indicator off) | Device not in pairing mode or powered off. | Press and hold the reset button for 6 seconds until the indicator flashes. Ensure batteries are installed correctly. |
| Indicator flashes quickly but won't connect | Incorrect Wi-Fi mode selected or 5GHz network. | Ensure your Wi-Fi network is 2.4GHz. Try AP Compatible Mode if Smart Wi-Fi Mode fails. |
| Indicator flashes slowly but won't connect | AP Compatible Mode connection issue. | Follow APP prompts carefully for AP mode. Ensure your phone is connected to the device's temporary Wi-Fi hotspot. |
| Low power warning | Batteries are low. | Replace all four AA batteries. |
| No water flow | Water valve closed, incorrect installation, or low battery. | Ensure the main water valve is open. Check installation for correct inlet/outlet direction. Replace batteries. |
LED State Reference:
- Pairing Mode: LED flashes twice per second.
- Low Power Mode: LED flashes 3 times.
10. User Tips
- Users have found this device easy to install and convenient for setting up watering schedules.
- The water metering feature is highly appreciated for accurately tracking water usage.
- Regularly check battery levels to ensure uninterrupted operation, especially during critical watering periods.
11. Warranty and Support
For detailed warranty information, technical support, or further assistance, please refer to the complete user manual PDF available for download. A digital copy of the user manual can be found at: User Manual (PDF).