ATOPCARE J10

Contents

ATOPCARE J10 4G Cellular Hunting Trail Camera User Manual

Model: J10 | Brand: ATOPCARE

1. Introduction

This manual provides detailed instructions for setting up, operating, and maintaining your ATOPCARE J10 4G Cellular Hunting Trail Camera. Please read it carefully before use to ensure optimal performance and longevity of your device.

Important Note

  • To install or replace the Micro SD card, please ensure that the camera is powered off. Only insert or replace the card when the camera is powered off. Afterward, restart the camera and add it to the app.
  • Please adjust the angle of the antenna in the vertical position to ensure a good signal, both before pairing and during use.
  • Please charge your camera before setting it up. It usually takes 10-13 hours to be fully charged. Then install the solar panel in the location with direct sunlight. The solar panel needs at least 3 hours of direct sunlight per day to charge the camera.
  • To avoid PIR false alarms, we recommend installing camera to keep the camera's lens away from lamplight, grass or tree leaves.

2. What's in the Box

Ensure all the following items are included in your package:

  • Cellular Trail Camera
  • Mounting Strap
  • Charging Cable
  • Camera Fix Bracket & Screw
  • User Manual (PDF) - View PDF
  • Solar Panel
  • Drilling Positioning Sticker
Diagram showing all components included in the box: Cellular Trail Camera, Mounting Strap, Charging Cable, Camera Fix Bracket & Screw, User Manual, Solar Panel, and Drilling Positioning Sticker.
Figure 1: Package Contents

3. Product Overview

Camera Components

Diagram of the J10 Cellular Trail Camera showing its external components: Antenna, Cable Lock Holes, Strap Holes, Hidden Infrared Light, Pickup, Photosensitive sensor, Horn, and Motion Sensor.
Figure 2: J10 Camera External Components
  • Hidden infrared LEDs: No visible red light when working, won't disturb animals.
  • Antenna: For 4G cellular connectivity.
  • Cable Lock Holes: For securing the camera.
  • Strap Holes: For mounting with a strap.
  • Pickup: Microphone for audio recording.
  • Photosensitive: Light sensor for automatic day/night mode switching.
  • Horn: Speaker for two-way audio.
  • Motion sensor: PIR sensor for detecting movement.

Ports and Indicators

Diagram of the J10 Camera's ports and indicators: Indicator Light, Reset Button, Power On/Off Button, TF Card Slot, SIM Card Slot, Charging Port (Type-C), and 4G Signal Indicator.
Figure 3: J10 Camera Ports and Indicators
  • Indicator Light: Lights up red when powered on. After the blue light is always on, you can scan the code to add the device.
  • Reset Button: Press and hold for 5 seconds to enter reset pairing state (blue light flashing + prompt tone).
  • Power On/Off Button: To turn the camera on or off.
  • TF Card Slot: For Micro SD card storage.
  • SIM card slot: For 4G cellular data SIM card. Ensure correct insertion direction.
  • Charging Port (Type-C): For charging the camera.
  • Charging Indicator: Red light is always on during charging, and off when fully charged.
  • 4G Signal Indicator:
    • Red LED: Weak signal
    • Blue LED: Medium signal
    • Green LED: Strong signal

Charging the Camera

Please plug the camera into a power source to charge it for about 10-13 hours using the provided USB cable. After adding the camera to the App, the App will display the battery status. The charging indicator light is solid red when charging and will turn off when the camera is fully charged.

4. Setup and App Configuration

Storage Options

You can store your event videos in a Micro SD card or utilize cloud storage based on your preference.

  • Option 1: SD Card. Please install the Micro SD card after the camera is powered off, and use a Micro SD card of 8GB~128GB, class 10 or higher.
  • Option 2: Cloud Storage. For new users, a free trial of 30-day cloud storage is offered.

Download and Install App

The UCon App is required to manage your camera. Choose one of the following methods to download:

  • Option 1: Scan the QR code below to download the UCon App.
  • Option 2: Search "UCon" in Google Play Store (for Android) or App Store (for iOS) and download it.
QR code for UCon App download, with Google Play and App Store badges.
Figure 4: UCon App Download Options

Important Notes for App Installation:

  • Please confirm the UCon App icon (as shown in the download section) before downloading it. Otherwise, you may not be able to add the camera successfully.
  • Allow "UCon" to use mobile cellular data and wireless network. Otherwise, you may fail to add the 4G camera.
  • Allow "UCon" to access phone location and push messages to the phone. Otherwise, the phone will not receive alerts from the UCon when motion detection is triggered.

Register an Account

Register an account using your Email address. It is recommended to verify your account via email so you can retrieve your password if forgotten. Set a password that is a combination of 8-32 digits and alphabet, and keep a record of it.

Important Notes for Registration:

  • Please click "Allow" or "Agree" while downloading the UCon App and setting up an account. This allows the UCon App to access camera, location, storage, microphone, notifications, and wireless data permissions on your mobile phone. Failure to do so may result in fewer functions or incomplete settings.
  • Some email domains (e.g., att.net, msn.com, hotmail.com) may be strict with unsubscribed emails. You might need to use a different email address to receive verification emails smoothly.

Adding the Camera to the App

Important Notes Before Adding Camera:

  • Adjust the antenna angle to the vertical position for a good signal, both before pairing and during use.
  • After turning on the camera, wait for about a minute. When the indicator light stays blue, it means the camera has successfully recognized the SIM card.

Step 1: Open the "UCon" APP, click "Add Device" or "+", then scan the QR code pasted on the camera to identify the device.

Step 2: Follow the App's guide. When the camera's indicator light stays blue, tick the checkbox, and then click "Next".

Step 3: Choose the name of the device from the drop-down choice, or modify it as desired. Then select the area where the device is located (you must choose one, or you cannot connect the camera to the App).

Congratulations! You have successfully connected the camera to the App. You can now watch live video on your phone anytime and anywhere.

5. Camera & Solar Panel Installation

Important Note:

  • To ensure the camera works safely, please mount the camera in a firm place.
  • After installing the camera, please lock the screw and cover the waterproof plug.
  • If the camera is installed near the ground, make sure the bottom of the camera is more than 1.6 feet (19.2 inches) away from the ground.

Using a Strap to Fix the Camera

Pass the strap through the hanging hole on the back of the camera, then fix the strap on a tree or other firm object. Adjust the camera's shooting angle, and tie the strap tightly.

Diagram showing how to thread the mounting strap through the camera's back holes and secure it around a tree.
Figure 5: Camera Mounting with Strap

Solar Panel Installation

For optimal performance, install the solar panel in a location that receives direct sunlight for at least 3 hours daily.

  1. Use the drilling tool to punch holes in the wall or tree, then fix the panel bracket with screws and anchors.
  2. Slot the solar panel into the bracket and ensure it's secure. Loosen the adjusting control on the bracket and adjust the angle of the solar panel to receive direct sunlight. Re-tighten the adjusting control to secure your setting.
  3. Connect the solar panel to the charging port of the camera.
Diagram showing the solar panel mounting bracket and how to adjust its angle for optimal sunlight exposure.
Figure 6: Solar Panel Bracket Installation
Diagram showing the solar panel connected to the camera's charging port.
Figure 7: Solar Panel Connected to Camera

Installation Video Guide

Video 1: Step-by-step guide on installing the J10 camera and solar panel on a tree.

6. App Functions

The UCon App provides various features to control and monitor your camera:

Screenshot of the UCon App interface highlighting various functions like settings, full screen play, cloud storage, manual recording, calendar, two-way talk, screenshot, and voice.
Figure 8: UCon App Interface and Functions
  • Setting: Click to enter device settings.
  • Full screen play: Click the icon to switch to full screen video playback.
  • Cloud storage: Click to switch between playback videos saved in cloud storage or micro SD card.
  • Manual Recording: Click to manually record video.
  • Calendar: Click to check videos from previous dates.
  • Two-way Talk: Click to speak to visitors and hear what they say.
  • Screenshot: Click to enable screen capture; pictures will be saved to your phone's album.
  • Voice: Click to mute the sounds from the camera.
  • Resolution: Click to choose the resolution (HD or SD).

Battery Status and Signal Strength

Screenshot of the UCon App showing battery charging status and 4G LTE signal strength indicators.
Figure 9: App Battery and Signal Indicators
  • Battery charging sign:
    • When the camera is exposed to sunlight or charged with the USB cable, the indicator of battery will stay green.
    • During night or when fully charged, the battery indicator will stay white.
    • Tips: If your battery sign does not show the correct status, remove the solar panel and then re-install it to the camera body.
    • Low power indicator: Please recharge the camera manually using the provided USB cable.
  • Number of users: If you invite a second user to your camera, note the following:
    • You can share different permissions as you wish.
    • You can customize the permissions.
    • Shared users cannot change the administrator's password and are limited to defined permission configurations.
  • 4G LTE signal strength: Ensure your camera has a full bar of 4G LTE signal strength for smooth live view speed.

7. Specifications

AttributeValue
Brand NameATOPCARE
Model NumberJ10
OriginMainland China
Video Resolution2560*1440/15fps, 640*360/15fps
Photo Resolution4MP, 8MP, 14MP
Motion DetectionPIR+motion detection, effective distance 10-20 meters
Waterproof RatingIP66
Night Vision940nm infrared night vision
LensHigh-definition lens F=2.6 horizontal FOV 90 degrees
Battery3*18650 lithium battery 6000mAh
CertificationCE ROHS FCC
High-concerned chemicalNone

8. Troubleshooting (FAQs)

8.1 Fail to add the camera into App

  • Make sure the place where you install the camera has a strong 4G mobile network.
  • Please check whether the data plan has run out. If there is no remaining data, please top up data in time.
  • If all the above methods can't solve your problem, please contact customer service.

8.2 The camera remains offline after topping up SIM card

After topping up, you can activate the device manually (turn off-turn on) or automatically (waiting for 1 hour), and then wait for the device to restore online state.

Note: When the data allowance is below 200MB, a relevant notice will show at the bottom of the live video.

8.3 The camera goes offline suddenly

  • Check the remaining data allowance on the SIM card. You can click camera settings to check for the remaining data allowance.
  • Check the camera's electricity. Please charge the device for an hour and then turn it on to check whether it is online.
  • Check the 4G network signal. If you installed it in a closed space, it is recommended to test elsewhere.

8.4 How to add a new family

Please follow these steps to add a new family:

Click the "home" icon → click "Add location" → input your desired family name → click "next step" → input required information → click "finish" to save it.

Note: Please pay attention to choose the correct "Country/Region" so that you can connect the camera smoothly later and get proper notifications from your correct region server. The required fields are country and state.

8.5 How to share your camera

Click the share icon from the "Device list" page and choose "share permissions" from the "Basic settings" page. Click "Share" and input the email address of the person you want to invite. Click "Next" to choose permission from Administrator, family member, Visitor, or Customize. You can customize the permissions by clicking the blue icon "permissions" and check the invited users' list from the "share management" page.

Note: Invited users must register a UCon account with their email before you start sharing your camera. Then, the invited users need to open their UCon App → bottom right → "Me" → "My friends" to accept the sharing invitation.

8.6 How to turn off notification

This icon indicates whether the notification is on. Click on the bell icon to turn it off, and you will not receive any notifications.

Note: When you turn off the notification here from the "Device list" page, all motion-triggered events will keep recording to the Cloud or micro SD card as you set.

8.7 Steps to recharge SIM card data

Refer to the UCon App for specific steps to recharge SIM card data. This is typically found within the device settings or a dedicated data management section of the app.

8.8 Alarm push frequently

  • Change the App's settings, turn down the detection sensitivity: Device settings → Activity detection, and select the correct detection sensitivity for you.
  • Check whether other objects may trigger the PIR sensor incorrectly, such as the outdoor unit of an air conditioner, passing cars, or pedestrians. Adjust the angle of the device accordingly to avoid easily disturbing objects.

8.9 How to set the capture mode

There are two capture modes for the camera: Video mode or Picture mode. Go to "Device Settings" → "Capture mode", and select the capture mode you want. If set to "Video mode": the camera will automatically record video when it detects motion. If set to "Picture mode": the camera will automatically take a photo when it detects motion.

8.10 Abnormal status indicator light of 4G camera

Indicator StatusProblem & Solution
The red light and blue light flash alternately and quicklyThe device does not recognize your SIM card. Solution: Please confirm whether the SIM card has been inserted, and check whether it is inserted in the correct direction.
The red light and blue light flash alternately and slowlyThe data plan of this SIM card has run out. Solution: Please top up the data in time. After topping up, the device needs to be activated: restart manually or wait for 1 hour to restart automatically, and then restore it to online state.

8.11 How to reset camera

Press and hold the reset button for 5 seconds to reset the camera. You need to release the button when you hear "system reset". After resetting the camera, you must follow all steps to add the camera (refer to page 6 for the process of re-adding the camera).

9. User Tips

No specific user tips were available from provided reviews or Q&A content. Always ensure the camera is placed in a location with good cellular signal and direct sunlight for the solar panel to function effectively.

10. Warranty and Support

For any issues not covered in this manual or for warranty inquiries, please contact ATOPCARE customer service. Keep your purchase receipt for proof of purchase.

11. FCC Warning

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

! This dedicated data SIM card is exclusively designed for the accompanying camera. Insertion into mobile phones or other internet-accessing devices is strictly prohibited.

! Unauthorized usage risks SIM card locking and device failure. We appreciate your adherence to this regulation.

© 2024 ATOPCARE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.