1. Introduction
Thank you for choosing the Ezonetronics Intelligent Car Information System. This system integrates navigation and entertainment, also known as the Car-Machine Interconnection System, allowing seamless connectivity between your vehicle and mobile phone. Enjoy features like voice-controlled navigation, music playback, video streaming via USB, and hands-free calling for a safer and more convenient driving experience.
1.1 Safety Precautions
- Driving Safety: Do not operate the system in a way that distracts you from driving. Always comply with traffic laws and regulations.
- Power Supply: This device requires a 12V-24V 5A vehicle power supply. Do not connect it to a substandard power supply to prevent damage.
- Installation & Maintenance: Installation and any repairs should be performed by professional maintenance personnel. Do not disassemble, reassemble, or modify the system software without authorization.
- Environmental Conditions: Avoid using the device in extreme environments. The normal operating temperature range is -40°C to 70°C. Do not spill liquids or chemicals on the unit.
- Data Responsibility: The manufacturer is not responsible for data loss or damage due to incorrect operation, maintenance, or other unforeseen circumstances.
2. Product Features
The Ezonetronics Retrofit Kit enhances your Mercedes Benz NTG 6.0 MBUX system with modern connectivity and entertainment options while retaining original car functions.
- Wireless/Wired CarPlay & Android Auto: Seamlessly integrate your smartphone for navigation, music, calls, and more.
- Dual Band Wi-Fi & Bluetooth 5.0: Built-in 2.4G and 5.8G Wi-Fi for stable connections and Bluetooth 5.0 for enhanced connectivity.
- Voice Control: Utilize voice commands (e.g., "Hey Siri") for hands-free operation.
- Online Navigation: Use your preferred navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
- Retains Original Car Functions: Control via steering wheel buttons, central control panel, and original touch controls.
- DSP Audio Processing: Built-in Digital Signal Processor (DSP) with adjustable Audio EQ for optimal sound quality.
- Camera Inputs: Two RCA inputs for aftermarket rear and front cameras (PAL/NTSC). Supports HD 360 panoramic cameras, dynamic guidance lines, and parking distance control.
- Plug and Play Installation: Non-destructive installation without cutting wires.

Figure 1: Wireless CarPlay Smart Module highlighting key features.
3. Compatibility
This retrofit kit is exclusively compatible with Mercedes Benz vehicles equipped with the NTG 6.0 MBUX System. Please verify your car's original radio homescreen menu picture to ensure compatibility before installation.

Figure 2: Check your original car radio homescreen. Only NTG 6.0 is compatible.
3.1 Compatible Model List

Figure 3: List of compatible Mercedes Benz models, years, and screen sizes.
| Car Model | Years | Screen Size |
|---|---|---|
| A-Class (W177) | 2019+ | 10.25-inch |
| B-Class (W247) | 2020+ | 10.25-inch |
| E-Class (W213) | 2020+ | 12.3-inch/10.25-inch |
| G-Class (W463) | 2019-2020 | 12.3-inch |
| V-Class (W447) | 2019+ | 10.25-inch |
| CLA (C118) | 2019+ | 10.25-inch |
| CLS (C257) | 2020+ | 12.3-inch/10.25-inch |
| GLA (H247) | 2019+ | 10.25-inch |
| GLB (X247) | 2019+ | 10.25-inch |
| GLC (X253) | 2020+ | 10.25-inch |
| GLS (X167) | 2019+ | 10.25-inch |
| GLE (W167) | 2020+ | 10.25-inch |
| EQA (H243) | 2020-2022 | 10.25-inch |
| EQB (X243) | 2020-2022 | 10.25-inch |
| EQC | 2020-2022 | 10.25-inch |
4. Setup and Installation
4.1 Package Contents
Before beginning installation, ensure all components are present:

Figure 4: Decoder box (139x92x20mm) and included cables: Power Cable, LVDS OUT & LVDS IN, RCA & USB Cable.
- 1 x NTG 6.0 CarPlay Decoder Box
- 1 x Power Harness
- 1 x LVDS Cable (LVDS IN & LVDS OUT)
- 1 x RCA & USB Cable
4.2 Wiring Diagram
The installation is plug-and-play. Carefully follow the wiring diagram to connect the decoder box to your vehicle's existing system. Ensure all connections are secure.

Figure 5: Wiring diagram showing connections for LVDS IN, LVDS OUT, Camera/USB, Power/CAN, Factory LVDS Harness, and Factory Power Harness.
4.3 DIP Settings & Switch
After physical installation, configure the DIP switches on the decoder box according to your specific car model and screen size. Incorrect DIP settings can lead to display issues or non-functionality.
| Car Model | Year | Screen Size | DIP Setting |
|---|---|---|---|
| A-Class (W177) | 2019+ | 10.25-inch | 236 |
| B-Class (W247) | 2020+ | 10.25-inch | 236 |
| E-Class (W213) | 2020+ | 12.3-inch/10.25-inch | 2345/2346 |
| G-Class (W463) | 2019-2020 | 12.3-inch | 236 |
| V-Class (W447) | 2019+ | 10.25-inch | 236 ON (Connect ACC) |
| CLA (C118) | 2019+ | 10.25-inch | 236 |
| CLS (C257) | 2020+ | 12.3-inch/10.25-inch | 2345/236 |
| GLA (H247) | 2019+ | 10.25-inch | 236 |
| GLB (X247) | 2019+ | 10.25-inch | 236 |
| GLC (X253) | 2020+ | 10.25-inch | 236 |
| GLS (X167) | 2019+ | 10.25-inch | 236 |
| GLE (W167) | 2020+ | 10.25-inch | 236 |
| EQA (H243) | 2020-2022 | 10.25-inch | 236 |
| EQB (X243) | 2020-2022 | 10.25-inch | 236 |
| EQC | 2020-2022 | 10.25-inch | 236 |
Note: Ensure the dial is set to "ON" for the specified DIP switches. After changing any DIP settings, you must reboot the decoder box for the changes to take effect.
5. Operating Instructions
5.1 Control Buttons
The system integrates with your vehicle's existing controls for a seamless user experience.

Figure 6: Steering wheel buttons for call management and volume control.
| Button | Operation | Function |
|---|---|---|
| Call button | Short press | Answer the phone |
| Hang up button | Short press | Hang up the phone |
| Volume roller | Topspin | Increase the volume |
| Volume roller | Backspin | Decrease the volume |

Figure 7: Central console controls for system navigation and switching.
| Button | Operation | Function |
|---|---|---|
| Back arrow button | Long press | Switch between OEM screen and CarPlay/Android Auto interface screen |
| Hazard light button | Double Click | Switch between OEM screen and CarPlay/Android Auto interface screen |
| Touchpad/Rotary controller | Swipe/Click | Control function (navigation within the interface) |
| Screen | Touch screen | Control function (if your car has a touchscreen) |

Figure 8: Long press the "back" button on the car knob to switch between OEM, Apple CarPlay, and Android Auto systems.
5.2 Wireless CarPlay & Android Auto Connection
The system uses Bluetooth for initial pairing and Wi-Fi for data transmission. Ensure your phone's Bluetooth and Wi-Fi are enabled.
- On your smartphone, go to Bluetooth settings and search for available devices.
- Select the device named "CAR Audio_XXXX" (where XXXX is a unique identifier).
- Confirm the pairing request on both your phone and the car screen.
- Once paired, your phone will automatically connect via Wi-Fi for CarPlay or Android Auto functionality.
- Audio Source: Ensure your iPhone's sound output is set to the original car radio (MBUX) for proper audio routing.
5.3 External Camera Settings
The system supports aftermarket rear and front view cameras, as well as 360 panoramic camera systems.

Figure 9: Wiring diagram for connecting external cameras (Rear Camera Detect, CAM F Video, CAM B Video).
To enable camera functions and adjust settings:
- Enter the system settings: Go to "Factory mode" > "Advanced mode".
- Enter the password "888888".
- Navigate to "MCUsetup" and uncheck the "A0" option.
- Return to the previous level and click "Restart system" to activate the reversing rear view function.
5.4 Radar and Trajectory Display
If your aftermarket camera supports dynamic trajectory lines and radar display, you can enable these features:

Figure 10: MCU Setup screen for enabling radar and trajectory lines.
- Reversing Trajectory Line: In the MCU Setup menu, uncheck the "A1" box to display the reversing trajectory line.
- Aftermarket Radar: Uncheck the "A2" box to enable the aftermarket radar option.
6. Maintenance
To ensure the longevity and optimal performance of your Ezonetronics Retrofit Kit, follow these general maintenance guidelines:
- Keep the unit clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Prevent liquids from coming into contact with the device.
- Ensure proper ventilation around the unit to prevent overheating.
- Avoid exposing the unit to extreme temperatures outside its specified operating range.
7. Troubleshooting
If you encounter issues with your retrofit kit, please refer to the following common problems and solutions:
7.1 Bluetooth Disconnects After Connection
This is normal behavior. The system uses Bluetooth for initial device pairing, but then switches to Wi-Fi for high-speed data transmission (for CarPlay/Android Auto). The Bluetooth connection may appear to disconnect to avoid interference once Wi-Fi is established.
7.2 Cannot Connect CarPlay/Android Auto (Bluetooth Already Paired)
- On your iPhone, go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings.
- Forget the "CAR Audio_XXXX" device from your phone's Bluetooth settings.
- Reboot your phone and the car's infotainment system.
- Attempt to pair and connect again.
7.3 Wireless CarPlay/Android Auto Connection Not Stable
- Check for Obstructions: Ensure the decoder box is not blocked by metal components in the vehicle, as this can impair Wi-Fi signal transmission.
- Switch Wi-Fi Channel: Access the decoder box's settings (Factory Mode > Connectivity Settings > Hotspot Band) and try switching the Wi-Fi channel to 1, 6, or 11, depending on your region and local interference.
7.4 Screen Does Not Turn On After Installation
- Check All Connections: Verify that all power, LVDS, and other cables are securely connected to both the decoder box and the vehicle's system.
- Verify DIP Settings: Double-check that the DIP switches on the decoder box are set correctly according to your car model and screen size (refer to Table 2). Incorrect settings are a common cause of display issues.
- Power Supply: Ensure the decoder box is receiving adequate power (12V-24V 5A).
7.5 Steering Wheel Controls Not Working / Bluetooth Connection Lost
- DIP Settings: Re-verify your DIP switch settings as incorrect configuration can affect control integration.
- Re-pairing: Try forgetting the device on your phone and the car system, then re-pair from scratch.
- Audio Source: Confirm that the audio output on your phone is correctly routed to the car's original Bluetooth system (MBUX).
8. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 9-16V, 14.4V (rated) |
| Storage Temperature | -30°C ~ +85°C |
| Operating Temperature | -30°C ~ +75°C |
| Ambient Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption Current | 1A (rated), 3A (Max) |
| Shutdown Current | 300mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current (USB) | ≤2A (If USB charging current > 1A, host activates circuit protection to control current within 15A) |
9. User Tips
- Verify Compatibility: Always double-check your car's NTG 6.0 MBUX system compatibility using the provided guide (Figure 2) before starting installation.
- Secure Connections: Ensure all wiring harness connections are firm and fully seated to prevent intermittent issues.
- DIP Switch Accuracy: Pay close attention to the DIP switch settings (Table 2) for your specific model and screen size. Incorrect settings are a frequent cause of problems.
- Troubleshooting Connectivity: If you experience connection drops, try resetting your phone's network settings and re-pairing the device.
- Wi-Fi Stability: For optimal wireless performance, ensure the decoder box is installed in a location free from metal obstructions that could interfere with Wi-Fi signals.
10. Warranty and Support
For technical assistance or warranty claims, please refer to the documentation included with your product. You may also contact Ezonetronics technical support directly:
- Technical Support Email: techsupport@anyfar.com
- Website: www.anyfar.com
Please have your product model (RM-BZ2517F) and purchase details ready when contacting support.