Erilles DS13 MAX TMR Electromagnetic Joystick

Contents

GINFULL DS13 MAX TMR Electromagnetic Joystick User Manual

Model: DS13 MAX TMR Electromagnetic Joystick

Brand: Erilles

1. Introduction

The GINFULL DS13 MAX TMR Electromagnetic Joystick is an advanced replacement module designed to enhance the performance and longevity of your gaming controllers. Utilizing cutting-edge Tunneling Magnetoresistance (TMR) technology, this joystick offers superior precision, responsiveness, and durability compared to traditional potentiometer-based joysticks. It is engineered to eliminate common issues like stick drift, providing a seamless and immersive gaming experience.

This manual provides essential information for the safe installation, operation, and maintenance of your GINFULL DS13 MAX TMR Electromagnetic Joystick.

2. Warnings & Safety Information

  • ATTENTION: Do not disassemble or modify the product, as this may cause safety hazards.
  • ATTENTION: Follow installation and operation guidelines to avoid injury.
  • ATTENTION: Do not use on non-PS5 & PS5 Edge gaming devices.
  • ATTENTION: To be used under the direct supervision of an adult.
  • ATTENTION: The product must be kept out of the reach of children under a certain age.

3. Features

  • Precise Control: Enhances responsiveness and accuracy for superior gaming performance.
  • Durable Construction: Made of high-strength plastic and metal components for extended lifespan.
  • Broad Compatibility: Compatible with PS5, PS4, and Xbox controllers (adapter may be required for some Xbox models). Also compatible with PS5 Edge, Ginful DS13, and Gamesir G7 SE.
  • TMR Technology: Advanced Tunneling Magnetoresistance (TMR) technology provides better performance and lower power consumption.
  • Ultra-low Power Consumption: Customized low-power TMR chip with power consumption as low as 200μA.
  • Zero Jitter & Latency: Ensures quicker response and eliminates unwanted input fluctuations.
  • High Resolution: Accurately communicates every subtle operation.
  • Linear Response: Produces a linear output voltage within the specified range for precise operation and true feedback.
  • High Durability: Rigorously tested for stability in various extreme conditions, offering an extremely high drift resistance with a 5+ years lifespan.
  • Auto Aim Support: Improves competitive gaming performance.
  • 3D Analog: Provides smooth control for immersive gameplay with 360° accuracy.

4. Setup & Installation Instructions

Professional installation is recommended. Use anti-static equipment to avoid damaging the motherboard or other components.

  1. Open the packaging and carefully remove the new joystick module.
  2. Power off your controller (PS5, PS4, or Xbox) and remove the back cover using appropriate tools (e.g., plastic pry tool or spudger).
  3. Disconnect the battery connector and carefully remove any internal screws securing the original joystick housing.
  4. Locate the original joystick module and gently lift it from the controller's PCB. Note the orientation of the connector and any springs.
  5. Align the new GINFULL DS13 MAX TMR module with the socket on the PCB, ensuring the pins match correctly. Insert it gently and secure it, typically via soldering.
  6. Reassemble the controller, reconnect the battery, and ensure all components are securely in place.
GINFULL DS13 MAX TMR Joystick for PS5 Edge installation diagram
Figure 1: GINFULL DS13 MAX TMR Joystick for PS5 Edge installation diagram. Shows the joystick module and its placement on the controller PCB.
GINFULL DS13 MAX TMR Joystick for PS4 installation diagram
Figure 2: GINFULL DS13 MAX TMR Joystick for PS4 installation diagram. Shows the joystick module and its placement on the controller PCB.
GINFULL DS13 MAX TMR Electromagnetic Joystick compatibility
Figure 3: GINFULL DS13 MAX TMR Electromagnetic Joystick features and compatibility with PS5, Xbox, and PS4 controllers.
Universal joystick orientation for left and right sides
Figure 4: The left and right sides of the joystick are universal, allowing for flexible installation.

5. Operation & Calibration

After verifying normal controller functionality, calibration is mandatory to ensure optimal performance and prevent issues like drift or inaccurate centering.

5.1 Initial Check

After reassembling the controller, power it on and test the joystick in-game or via your console's controller settings to confirm basic functionality.

5.2 Calibration Steps

To calibrate the joystick, you will need to use a dedicated third-party calibration tool. Follow these general steps:

  1. Open your preferred calibration tool website in a computer browser (e.g., dualshock-tools.github.io or nagashock.com/calibrate).
  2. Connect your controller to the computer.
  3. Step 1: Calibrate the center point of the joystick first.
  4. Step 2: Calibrate the outer ring of the joystick.

    Note: When calibrating the outer ring, you need to turn the joystick twice to allow the computer to recognize the voltage in each direction, and then click "Complete Calibration"! (To calibrate the outer ring, you need to install the joystick cap and the front cover, otherwise, it will be invalid.)

  5. Step 3: Permanently save the changes.
  6. Step 4: Restart the controller.
PS5 Hall joystick calibration steps on website
Figure 5: Example of a PS5 Hall joystick calibration software website page, illustrating the calibration steps.

Video 1: Demonstration of the GINFULL DS13 MAX TMR Electromagnetic Joystick, highlighting its low power consumption, zero jitter, and zero latency features.

6. Maintenance

  • Avoid Excessive Pressure: Do not apply excessive force or pressure on the joystick to prevent damage to the internal components.
  • Keep Dry: Do not immerse the joystick or controller in water. Avoid exposure to liquids.
  • Protect from Sunlight: Do not expose the joystick to prolonged direct sunlight or extreme temperatures, as this can degrade materials.
  • Clean Gently: If cleaning is necessary, use a soft, dry cloth. Avoid harsh chemicals or abrasive materials.

7. Troubleshooting (FAQs)

Q: My controller does not recognize the joystick after installation.
A: Verify correct installation of the joystick module. Ensure all connections are secure and properly soldered. Try restarting your console or computer.
Q: The joystick operates abnormally (e.g., drift or inaccurate center point) after installation.
A: After successful installation, calibration using a dedicated third-party calibration tool is mandatory. Without proper calibration, the joystick may malfunction. Refer to Section 5.2 for detailed calibration steps.
Q: How do I calibrate the joystick?
A: Open your preferred calibration tool website in a computer browser (e.g., dualshock-tools.github.io or nagashock.com/calibrate) and follow the on-screen instructions. If you require further assistance, please contact customer support for a step-by-step calibration video.

8. Specifications

Feature DS13 MAX 2nd Gen TMR Standard Potentiometer Stick
Technology TMR (Tunnel Magnetoresistance) Potentiometer (Variable Resistor)
Drift Resistance Extremely High (5+ years lifespan) Low (common after 6-12 months)
Response Time 0.1ms (near-instantaneous) 1-2ms
Compatibility PS4, PS5, Xbox (with adapter), Ginful DS13, Gamesir G7 SE PS4/PS5 (limited)
Angle Precision 3D Analog with 360° Accuracy Standard 2D Movement
Installation Difficulty Easy (plug-and-play) Medium
Comparison table of DS13 MAX 2nd Gen TMR vs. Standard Potentiometer Stick
Figure 6: Detailed comparison between DS13 MAX 2nd Gen TMR and standard joystick technologies.

General Product Properties:

  • Language: English Version
  • Interface Type: USB
  • Type: Joysticks
  • Origin: Mainland China
  • Certification: NONE

9. User Tips

  • Many users report that after installing the DS13 MAX TMR module, their controller feels brand new—snappy, precise, and consistent, with no more stick drift.
  • It is highly recommended to perform the calibration steps (Section 5.2) immediately after installation to ensure optimal performance and prevent any initial drift issues.
  • Consider professional installation or use anti-static equipment during installation to protect your controller's motherboard and other sensitive components.

10. Warranty & Support

10.1 Manufacturer Information

  • Company Name: Shenzhen Yinjie Technology Development Co., Ltd.
  • Address: 309B, Building C, No. 17 Yongxiang East Road, Ma'antang Community, Bantian Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China
  • Email: 3808939441@qq.com
  • Telephone: 86-15814653068

10.2 EU Authorized Representative

  • Company Name: MJCM SARL
  • Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR

10.3 After-Sales Service

If you have any questions or require further assistance, please send an online message to the manufacturer or authorized representative.

For additional resources, including a user manual in PDF format, please refer to the User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.