1. Introduction
Thank you for choosing the Haozee Zigbee Water Leak Detector. This device is designed to provide real-time monitoring for water leakage and water levels in your home, offering an audible alarm and instant notifications to your smartphone. It integrates seamlessly with Zigbee 3.0 hubs and supports Home Assistant with Zigbee2mqtt for advanced smart home automation.
2. Safety Information
- This device is for indoor use only.
- Do not expose the device to extreme temperatures or humidity outside its operating range.
- Keep the device and its probe away from children and pets.
- Ensure batteries are inserted with correct polarity.
- Do not attempt to disassemble or repair the device yourself.
3. Package Contents
Please check that all items are present:
- 1 x Smart Water Leak Sensor (Main Unit with Wired Probe)
- 1 x User Manual (this document)
4. Specifications
| Parameter | Value |
|---|---|
| Model Number | Smart Water Leak Sensor |
| Connection Way | Zigbee 3.0 |
| Battery Type | LR03 / DC 3V (2x AAA, not included) |
| Operating Current | ≤80mA |
| Standby Current | ≤10uA |
| Standby Time | ≥12 Months |
| Built-in Siren | ≥110dB |
| Operating Temperature | -10°C ~ 55°C |
| Operating Humidity | 0% ~ 99% RH |
| Product Size | 72x32x24mm |
| Line Length | 1 meter |
5. Setup
Important: A Zigbee gateway (hub) is required for the operation of this sensor and is sold separately. This device supports Zigbee 3.0 and is designed to work with Home Assistant via Zigbee2mqtt. It does not support Tuya/Smart Life directly.
5.1. Battery Installation
- Open the battery compartment cover on the main unit.
- Insert two LR03 (AAA) 1.5V batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
5.2. Pairing with a Zigbee Gateway
- Ensure your Zigbee gateway is powered on and in pairing mode. Refer to your gateway's manual for specific instructions on how to enter pairing mode.
- Power on the Haozee Water Leak Detector (by inserting batteries). The device should automatically enter pairing mode, indicated by a flashing LED.
- If the device does not enter pairing mode automatically, you may need to press and hold the reset button (usually a small pinhole button) for 5-10 seconds until the LED flashes rapidly.
- Once successfully paired, the LED indicator on the sensor will stop flashing or turn solid for a few seconds, then turn off. The device should appear in your Zigbee controller's interface (e.g., Home Assistant via Zigbee2mqtt).
5.3. Placement
Place the main sensor unit in a dry location, and position the wired probe in the area where water leakage or level monitoring is desired. The probe can detect both water leakage (on a surface) and low/high water levels (in a container).
- Water Leakage Monitoring: Place the probe's two metal feet directly on the surface where leaks might occur (e.g., under a sink, near a washing machine, in a basement).
- Low Water Level Monitoring: Suspend the probe inside a container at the desired low-level threshold.
6. Operation
6.1. Leak Detection and Alarm
When the probe's two metal feet come into contact with water, the sensor will immediately detect the presence of water. This will trigger:
- An on-site audible alarm (≥110dB) from the main unit.
- A push notification to your smartphone via the connected smart home app (e.g., Home Assistant).
6.2. App Remote Control
Through your smart home application (e.g., Home Assistant with Zigbee2mqtt), you can:
- Receive real-time alerts and check the sensor's status from anywhere.
- Adjust the alarm sound size and set the alarm duration (if supported by your Zigbee controller and device firmware).
- View a history of all detected events and notifications.
6.3. Smart Scene Automation
Leverage your Zigbee gateway to create automated responses to water detection:
- Visual Alerts: Flash smart lights in your home.
- Water Shut-off: Automatically close smart water valves to prevent further damage.
- Enhanced Notifications: Send instant push notifications to multiple devices or announce alerts through smart speakers connected to your gateway.
7. Maintenance
7.1. Battery Replacement
The sensor will send low battery alerts to your smart home app when the battery power is running low. Replace the batteries promptly to ensure continuous protection.
- Open the battery compartment cover.
- Remove the old LR03 (AAA) batteries.
- Insert new LR03 (AAA) 1.5V batteries, observing correct polarity.
- Close the battery compartment cover.
7.2. Cleaning
Wipe the sensor and probe with a soft, dry cloth. Do not use abrasive cleaners or allow water to enter the main unit.
8. Troubleshooting
- Q: The sensor is not pairing with my Zigbee gateway.
- A: Ensure your gateway is in pairing mode. Check the distance between the sensor and the gateway. If necessary, try resetting the sensor by holding the reset button for 5-10 seconds until the LED flashes, then attempt pairing again. Confirm your gateway supports Zigbee 3.0 and Zigbee2mqtt.
- Q: The alarm is not sounding when water is detected.
- A: Check if the batteries are correctly installed and have sufficient charge. Verify that the alarm feature is enabled in your smart home app settings for the device. Ensure the probe's metal feet are making proper contact with the water.
- Q: I am not receiving notifications on my phone.
- A: Confirm that the sensor is successfully paired and communicating with your Zigbee gateway. Check your smart home app's notification settings and your phone's system notification settings to ensure alerts are not blocked. Ensure your phone has an active internet connection.
- Q: The sensor is showing offline.
- A: Check the battery level. Ensure the sensor is within range of your Zigbee gateway or a Zigbee router device. Restart your Zigbee gateway if other devices are also experiencing connectivity issues.
9. User Tips
- For optimal performance, regularly check the battery status through your smart home app.
- Test the sensor periodically by placing the probe in a small amount of water to ensure the alarm and notifications are working correctly.
- Consider placing sensors in multiple high-risk areas such as under sinks, near water heaters, and in laundry rooms for comprehensive protection.
- If using with Home Assistant, ensure your Zigbee2mqtt instance is up-to-date for best compatibility and features.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official Haozee website or contact your retailer. A user manual in PDF format is also available for download: Haozee Water Leak Detector User Manual (PDF).