Astrowind Z1(G4T)

Contents

Astrowind Dual Wireless Bluetooth Speaker User Manual

Model: Z1(G4T) / G421

1. Introduction

Thank you for choosing the Astrowind Dual Wireless Bluetooth Speakers. This system is designed to provide high-fidelity audio with the convenience of wireless connectivity, suitable for various indoor home audio setups including wall-mounted, desktop, and ceiling installations. Featuring multi-band separation and the ability to connect multiple speakers, it delivers an immersive sound experience. Please read this manual carefully before use to ensure proper installation and operation.

2. Safety Information

  • Ensure the power supply voltage matches the speaker's requirements (AC 110-250V).
  • Do not expose the speakers to water, moisture, or extreme temperatures.
  • Avoid placing speakers near heat sources or in direct sunlight.
  • Do not attempt to disassemble or repair the speakers yourself. Refer all servicing to qualified personnel.
  • Keep out of reach of children.
  • When cleaning, use a soft, dry cloth. Do not use liquid cleaners or aerosols.

3. Package Contents

Please check the package for the following items:

  • Astrowind Dual Wireless Bluetooth Speakers (2 units)
  • Power Cable (AC)
  • User Manual (this document)
  • Mounting hardware (if applicable for wall/ceiling mount)

4. Specifications

Product parameter table and dimensions of Astrowind G421 speaker

Figure 1: Product Parameters and Dimensions

Astrowind Z1(G4T) Speaker Specifications
Feature Description
Model Name BT desktop / wall-mounted speaker (Z1(G4T) / G421)
Power Range 12(R)-50W(P)+PA module
Input Power Supply AC 110-250V
Loudspeaker 4.5" Woofer, TVCP Tweeter (independent)
Frequency Response 90dB, 70-18KHz
Bluetooth Version 5.3
Wireless Range ≤10 meters (unobstructed)
Dimensions (L*W*H) 238mm * 138mm * 120mm
Channels 2 (2.0)
Audio Crossover Full-Range
Cabinet Material Metal
Sound Modes Hi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, Extra Bass Mode, Transparency Mode, Sleeping Mode, Standard Mode, Game Mode, 3EQ Modes, Other
Voice Control No
Waterproof No
Battery No

5. Setup Instructions

5.1 Physical Placement

The Astrowind speakers are versatile and can be used as desktop, wall-mounted, or ceiling speakers. Consider the acoustics of your room and desired sound coverage when choosing placement. For wall or ceiling mounting, ensure secure installation using appropriate hardware (not always included) and follow local building codes.

Rear view of two speakers showing wall-mount holes and speaker wire terminals

Figure 2: Rear View with Mounting Points and Terminals

5.2 Power Connection

Connect the provided power cable to the AC input on the speaker and then to a suitable power outlet (AC 110-250V). Ensure the power switch is in the OFF position before connecting to power.

5.3 Bluetooth Connection Method

Follow these steps to connect your speakers via Bluetooth:

  1. The Ceiling Loudspeaker enters the receiving state after powering on, and is displayed as CLS410-**** in the available device list of your phone or tablet computer (**** stands for a 4-digit random number).
  2. Choose the Ceiling Loudspeaker in the available list for pairing. The password is the last 4 digits of the device name (i.e., this 4-digit random number). You don't need to enter the password again when the same device is connected again.
  3. After pairing and connecting, the Ceiling Loudspeaker will automatically become the main speaker after playing media sound. Other unconnected Ceiling Loudspeakers will automatically access the signal of the main speaker and turn into sub-speakers.
  4. Once the phone or tablet computer, main speaker, and sub-speakers are connected, the device list of the connected phone or tablet computer will show the Bluetooth connection status of the main speaker as "Connected". The names of the other sub-speakers will not be shown in the list of available devices, and at the same time, other phones or tablet computers can no longer access the connected Ceiling Loudspeakers.
Diagram showing a smartphone connected via Bluetooth to a speaker system with a 10-meter range

Figure 3: Bluetooth Connection Diagram with 10-meter range

5.4 Connecting Multiple Speakers

Up to 99 speakers can be wirelessly connected to each other. The system intelligently detects audio signals and triggers wireless connections between modules, allowing for seamless multi-room audio without complex wiring.

Diagram showing a main speaker wirelessly connecting to multiple sub-speakers (up to 99)

Figure 4: Multi-Speaker Wireless Connection

6. Operating Instructions

6.1 Power On/Off

Locate the power switch on the speaker. Flip it to the 'ON' position to power on the speaker. Flip it to 'OFF' to power off.

6.2 Audio Playback

Once connected via Bluetooth to your device, simply start playing audio from your device. The sound will be transmitted wirelessly to the speakers.

6.3 Volume Control

Adjust the volume directly from your connected Bluetooth device (phone, tablet, computer). The speakers will respond to the volume settings of the source device.

6.4 Sound Modes

The speakers support various sound modes for an optimized listening experience. These modes are typically controlled via your connected audio source or specific applications. Available modes include: Hi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, Extra Bass Mode, Transparency Mode, Sleeping Mode, Standard Mode, Game Mode, and 3EQ Modes.

7. Maintenance

  • Cleaning: Use a soft, dry, lint-free cloth to clean the speaker surfaces. Do not use abrasive cleaners, waxes, or solvents.
  • Storage: If storing the speakers for an extended period, power them off and disconnect them from the power source. Store in a cool, dry place away from direct sunlight.
  • Ventilation: Ensure adequate ventilation around the speakers to prevent overheating. Do not block any ventilation openings.

8. Troubleshooting

Attention Points:

  1. Overload Protection: If the audio decibel played by your phone or tablet computer is too high, the Ceiling Loudspeaker may enter an overload protection state, manifesting as no sound or a prolonged zipping sound. To deactivate this state, first lower the volume of the connected device, then power the Ceiling Loudspeaker off and on again.
  2. Speaker Not Found: If the Ceiling Loudspeaker is not shown in the list of available devices on your phone or tablet computer, please check whether the Ceiling Loudspeaker has already been connected to other devices and is currently in the playing state. Ensure it is not actively paired with another device.

General Troubleshooting:

  • No Power: Check if the power cable is securely connected to both the speaker and the power outlet. Verify the power outlet is functional.
  • No Sound: Ensure the speakers are powered on and successfully paired via Bluetooth. Check the volume levels on both your source device and the speakers.
  • Poor Sound Quality: Ensure your Bluetooth device is within the 10-meter unobstructed range. Reduce interference by moving away from other wireless devices. Check the audio source quality.
  • Bluetooth Disconnection: Ensure the speakers are within range of your Bluetooth device. Try unpairing and re-pairing the speakers with your device.

9. User Tips

  • For optimal sound distribution in larger spaces, utilize the multi-speaker connection feature. Start with one main speaker and add sub-speakers as needed, up to 99 units.
  • Experiment with different sound modes (e.g., Extra Bass, 3D Surround) to find the best audio profile for your content and environment.
  • While the speakers offer a 10-meter range, maintaining a clear line of sight between the main speaker and your Bluetooth device, and between speakers, will ensure the most stable connection.

10. Warranty and Support

Astrowind products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

© 2024 Astrowind. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.