1. Introduction
The BAOFENG MINI-5 is a compact UV dual-stage smart handheld radio, designed for portability and versatile communication. It features Bluetooth frequency writing, Type-C fast charging, and full-band reception, making it a lightweight upgrade to the UV-5R series. This device is ideal for outdoor activities, security, logistics, and general amateur radio use.
Key features include:
- Frequency Bands: Transmitting VHF 136-174MHz and UHF 400-480MHz. Reception covers FM broadcasting (76-108MHz), aviation band (108-136MHz), UHF 350-390/400-520MHz, and NOAA weather channels.
- Power Output: Adjustable high power 5W / low power 2W for optimal distance and battery life.
- Channels: 999 programmable storage channels with 25kHz wide/12.5kHz narrow band dual mode.
- Battery: Standard 1600mAh lithium battery (optional 2200mAh thickened version available). Supports Type-C direct charging via power bank or mobile phone charger, offering 8-15 hours of battery life depending on usage.
- Interface: Standard Kenwood 2-pin earphone/programming port and a Type-C charging port.
- Sensitivity: Receiving 0.25μV (12dB SINAD) for stable signal and strong anti-interference.
2. Package Contents
Please check the package for the following items:
| Item | Quantity (PCS) | Item | Quantity (PCS) |
|---|---|---|---|
| Radio | 1 | Power Adapter | 1 |
| Battery | 1 | Lanyard | 1 |
| Antenna | 1 | Operation Manual | 1 |
| Belt Clip | 1 |
Note: Charger and power adapter specifications may vary based on the dealer's final configuration. The charging instructions in this manual may not be appropriate if a Type-C charging method is used.

3. Product Overview and Controls

3.1. Radio Components
- Antenna
- SK1-Customized Function Keys/Monitor button
- PTT-A Button (Push-to-Talk for Channel A)
- A/B button (Band Switch)
- Menu button
- PTT-B Button (Push-to-Talk for Channel B)
- Numeric Keypad/Speaker
- Flashlight
- Volume/Power Knob
- Screen
- Accessory Port
- Exit button
- ▲ Up button/▼ Down button
- Flashlight/Search button
- Microphone
- LED Indicator
- Battery Latch
- Type-C Charging indicator light
- Type-C Charging Port
- V/M-VFO/MR button (VFO/Memory Channel Switch)
- Belt Clip
3.2. LCD Display Icons
| Icon | Description |
|---|---|
| D | DCS enabled |
| (C) | CTCSS enabled |
| + | Enables access of repeaters in VFO/Frequency Mode. TX will be shifted higher in frequency than RX. |
| - | Enables access of repeaters in VFO/Frequency Mode. TX will be shifted lower in frequency than RX |
| D | Dual watch enabled |
| Keypad lock enabled | |
| VOX enabled | |
| The confidential calling feature is activated | |
| N | Narrowband enabled |
| Battery level indicator | |
| R | Reverse function enabled |
| T | The terminal is switched from transmit mode to pass-through mode. |
| SCR | The voice scramble function has been activated |
| RSSI | Squelch Open/Close Indicator |
| H/L | Transmit power level indicator, According to Power |
| Make sure you can hear the DTMF side tone from the radio speaker, set to DT-ST, ANI-ST, DT+ANI. |
4. Setup
4.1. Attaching the Antenna
Turn the antenna clockwise until it is tight. To remove the antenna, turn it counterclockwise.
CAUTION:
- Do not hold the radio antenna in your hand, as this will reduce the performance of the radio and the life of the antenna.
- Do not shake the radio with the top of the antenna in your hand, as this will degrade the performance and life of the radio antenna.
4.2. Charging the Battery
When using the terminal for the first time, a low battery warning may occur. It is recommended to turn off the radio during charging. The battery's LEDs provide an indication of the current state of charge:
| Indicator Light | Charging Status |
|---|---|
| Red light is always on | Charging |
| Green light is always on | Charging complete |

4.3. Wireless Programming (APP)
You can program the radio wirelessly using a dedicated APP. Before programming, install the APP on your smartphone.

Scan the QR codes below to download the APP:
Programming Steps:
- Open the APP, allow Bluetooth access, and enable location services on your phone.
- Select the "5Rmini Series" walkie-talkie model in the APP.
- Connect to the radio via Bluetooth. The APP will confirm successful connection and return to the home page.
- Read Radio Data: After reading the frequency, click "Program" to enter program details. In this interface, you can program channel information, frequency mode, and optional functions.
- Save Profile: Save the programmed profile as a new profile with a custom name. If replacing an existing program, select "Replace Program" and save.
- Write Data to Radio: From the home page, select the program, click "Write" to transfer the frequency data. The radio will automatically restart once the writing process is complete.
5. Operating Instructions
5.1. Basic Operations
Turning your Radio On and Off
- To turn your radio ON, turn the [Volume/Power] rotary knob clockwise.
- To turn your radio OFF, turn the [Volume/Power] rotary knob counterclockwise.
Setting the Volume
- Increase volume by turning the [Volume/Power] rotary knob clockwise.
- To decrease volume, turn the [Volume/Power] rotary knob counterclockwise.
CAUTION:
- Do not hold the radio close to your ear. If the volume is set to an uncomfortable level, it could hurt your ear.
Locking or Unlocking Keypad
To prevent accidental changes to radio settings:
- Press and hold the [*] key to lock the keypad until the
icon appears on the screen.
- In lock mode, you can still turn the intercom on/off, adjust volume, receive, transmit, send call tones, send emergency alerts, and listen to channels. All other functions remain locked.
- To unlock, press and hold the [*] key again until the
icon disappears.
Keypad Entry
You can enter radio aliases, channel aliases, numbers, etc., using the numeric keypad.
- To switch between input methods, press [#].
- Press [1] to enter a special character (except in numeric input mode, where '1' is entered).
- Press [0] to enter a space (except in numeric input mode, where special characters are entered).
Selecting a Channel
The channel is the frequency through which the signal is transmitted.
- Press the [V/M] button to toggle between VFO (Frequency) and Channel mode.
- Use the ▲/▼ buttons or the rotary encoder to select the desired channel.
- Enter the channel number using the keypad (e.g., enter 064 for channel 64).
Channel Memory
In Frequency and Standby mode, you can store frequencies and parameters.
- Press [MENU] [3] [MENU] [1] [5]. The screen will display "MEMCH".
- Press [MENU] to enter the function.
- Use the ▲/▼ buttons to select the channel, then press [MENU] to store it. A sound tone will confirm success.
- Press [EXIT] to return to standby mode.
Note: If you want to set CTCSS tones, DCS codes, or frequency offset, do so before storing the channel. Stored channels are displayed as CH-, other channels have no CH- display.
Deleting a Channel (DEL-CH)
In VFO mode and Standby mode:
- Press [MENU] [3] [MENU] [1] [6]. The screen will display "DELCH".
- Press [MENU] to enter the function.
- Use the ▲/▼ buttons or rotate the encoder to select the channel you want to delete, then press [MENU] to confirm.
- Press [EXIT] to return to standby mode.
Note: Channel 1 cannot be deleted.
Main Band/Sub Band Switch
In standby mode, press the [A/B] key to toggle between the A and B bands to switch between the main/sub bands. The main band is highlighted, the darker displayed band is the sub-band.
VFO/Channel Switch
Press the [V/M] button to switch between VFO (Frequency) and channel display. VFO mode will display the VFO icon, while MR mode will display the channel serial number.
Setting the VFO Frequency
- Turn the radio to VFO mode, then press the [A/B] key to switch to the main channel.
- Operation 1: Input the VFO frequency directly with the keypad.
- Operation 2: Press the ▲/▼ button or rotary encoder to adjust the VFO frequency in the set frequency step.
Call Service
All radios in the group must be set to the same channel and sub-code to communicate.
- To ensure optimal reception volume, keep the distance between the microphone and your mouth at 2.5 cm to 5 cm when transmitting.
- Initiate a call: Select a channel. Press and hold the [PTT-A] key; the radio transmits on segment A (upper screen) and the red indicator light is always on. Speak into the microphone with a normal voice tone. Alternatively, press and hold the [PTT-B] key; the radio transmits on the B segment (lower screen), and the red indicator light is always on. Speak into the microphone with a normal voice tone.
- Receive a call: After releasing the [PTT] key, the radio is in a receivable state. When receiving a call, the green indicator light is always on.
5.2. Special Functions
Emergency Alarm
The terminal can initiate an emergency alarm to seek help from a companion or control center during an emergency.
- In standby mode, press the preset [SOS] shortcut key to enable or disable the emergency alarm function.
Flashlight
The radio includes an LED flashlight for convenience.
- In standby mode, press the preset [LAMP] shortcut key or the
key to turn the flashlight on or off.

FM Radio Function
To use the FM radio:
- Set the [SK1] key to the radio function via Menu >> Radio Set >> Press SK1.
- Turn on the radio and press the [SK1] key (FM Radio) to enter radio mode. The screen displays the tuning frequency.
Operations in FM Radio Mode:
- Press ▲/▼ to search for radio channels at the preset step frequency.
- Press the [#↑] key to search for radio channels automatically. The screen displays 'SEEK...'.
- Press [EXIT] key to switch frequency band between 65.0/75.0MHz.
- Press [SK1] key (FM Radio) to exit radio mode.
Monitor
To listen for weak signals on the current channel or adjust volume when not receiving:
- Press and hold the pre-programmed [Monitor] key to enter monitor mode.
- Release the [Monitor] key to exit monitor mode.
Frequency Search
To search for frequencies:
- Press the pre-programmed [SEARCH] shortcut key or press and hold the
key. The radio enters frequency search state, displaying "SEARCH...".
- Press [#2] key to switch the searching band (e.g., VHF/UHF).
- After searching is completed, the frequency and CTCSS/DCS code will be displayed.
- Press [MENU] to save the channel.

Reverse Frequency Function
This function is often used in repeater channels when there is a frequency difference between receive and transmit frequencies.
- Short press the [*] key in relay mode to invert the receive and transmit frequencies. The screen shows the 'R' icon.
Talk Around Function
In repeater mode, this function allows direct communication without using the repeater.
- Press [*] to switch between Talkaround Mode and Repeater Mode. The screen displays 'T' and 'R' icons.
- In Talkaround mode, the receive frequency equals the transmit frequency.
Repeater Activation Tone
To activate a repeater in hibernation:
- Turn on the radio, press and hold the [PTT] key, then press the [SK1] to transmit a 1750Hz audio tone.
Voice-activated Transmit (VOX)
VOX allows transmission without pressing the PTT key; your voice automatically triggers transmission. Transmission stops automatically when speech ends.
Enabling VOX:
- In Standby status, press [MENU] [2] [MENU] [4] to enter Vox Switch.
- Press [MENU] [2] [MENU] [5] to enter Vox Level. Use ▲/▼ to select VOX level (1-9).
- To open VOX, select a level from 1-9. A smaller value indicates higher sensitivity. The 'V' icon is displayed at the top of the screen. (Default is off).
- To turn off VOX, select "OFF OFF". The 'V' icon disappears.
- Press [MENU] to save the setting and return to the upper menu.
- Repeat the above operation and select "OFF" to turn off the VOX function.
Dual Watch
In Dual Watch mode, the radio can receive frequencies set for both channel A and B.
- Press [MENU] [2] to enter Radio Set.
- Press [MENU] + ▲/▼ to select "15 Dual Watch".
- Press [MENU] to enter Dual Watch Setting, press ▲/▼ to select "On".
- Press [MENU] to save and return to the upper menu. The dual watch function will be turned on, and the 'D' icon will be displayed on the first line of the screen.
- To turn off, repeat steps 1-3 and select "Off". The 'D' icon will disappear. The sub-band displays the
icon.
Stopwatch Function
To activate the stopwatch function:
- Press and hold the [MENU] key.
- Press [MENU] to start the stopwatch.
- Press [MENU] again to stop the stopwatch.
- Press [EXIT] to exit the stopwatch function.
5.3. Using Menu Functions
Basic Use with Arrow Keys
- Press the [MENU] button to enter the menu.
- Use the ▲/▼ buttons or the encoder to navigate between menu items.
- Once you find the desired menu item, press [MENU] again to select it.
- Use the ▲/▼ buttons or the encoder to select the desired parameter.
- To confirm: Press [MENU] to save your setting and return to the main menu.
- To cancel: Press [EXIT] to reset the menu item and exit the menu entirely.
- To exit the menu at any time, press the [EXIT] button.
Using Menu with Shortcuts
- Press the [MENU] button to enter the menu.
- Use the numerical keypad to enter the number of the menu item.
- To enter the menu item, press the [MENU] button.
- For parameters: Use arrow buttons or the numerical keypad for the shortcut code.
- To confirm: Press [MENU] to save your setting and return to the main menu.
- To cancel: Press [EXIT] to reset the menu item and exit the menu entirely.
6. Maintenance
To ensure the longevity and optimal performance of your BAOFENG MINI-5 Walkie Talkie, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Avoid using harsh chemicals or solvents.
- Battery Care: Always charge the battery fully before first use. Avoid overcharging or completely draining the battery. Store the radio and battery in a cool, dry place when not in use.
- Antenna: Ensure the antenna is securely attached. Do not use the radio without an antenna, as this can damage the transmitter.
- Storage: Store the radio in a dry environment, away from extreme temperatures and direct sunlight.
- Water Resistance: This device is NOT waterproof/water-resistant. Avoid exposure to water or high humidity.
7. User Tips
- NOAA Weather Radio: Utilize the NOAA Weather Radio feature for real-time weather alerts, including thunderstorms, earthquakes, rainstorms, snowstorms, hurricanes, and floods. This can be a critical safety feature during outdoor activities.
- APP Programming: Take advantage of the Bluetooth APP programming for easy and flexible channel management and function customization. This is often more convenient than manual programming.
- Type-C Charging: The universal Type-C charging port allows for convenient charging using various sources like car chargers, power banks, or computers, making it easy to keep your radio powered on the go.
- Wireless Copy Frequency: Use the wireless copy frequency feature to quickly clone settings from another radio, saving time and ensuring consistent communication within a group.
- Flashlight: The built-in LED flashlight is a handy tool for low-light conditions, enhancing safety and utility.

8. Technical Specifications
| General | |
|---|---|
| Receiver Frequency | FM 76-108 MHz; VHF 144-146MHz, UHF 430-440MHz |
| Transmission Frequency | VHF 144-146MHz, UHF 430-440MHz |
| Channel Spacing | 25.0KHz(Wide)/12.5KHz(Narr) |
| Memory Channel | 999 Groups |
| Operation Voltage | DC 7.4 V ±10% |
| Dimensions | 108mm×52mm×39mm (No antenna) |
| Weight | 212g (Battery pack included) |
| Transmission current | ≤1600mA |
| Receive Sensitivity | 0.25μV (12dB SINAD) |
| Rated Audio Power Output | 1W @16 ohms |
| Receive current | ≤380mA |
| Connection for accessories | 2 pin Kenwood jack |
| Antenna impedance | 50 Ohm |
Note: All specifications may be modified without prior notice or liability.
9. Warranty and Support
9.1. EU Declaration of Conformity
Baofeng and Pofung declare that the radio equipment type listed in Technical Specifications is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following link: http://www.pofung.cn/download.asp?EnBigClassName=EU%20DOC.
For support, contact your local Baofeng helpdesk, the dealer from whom you purchased this radio, or send an email to wangjianhui@baofengradio.com.
9.2. Conditions of Use (EU)
The frequency band on which this device operates is subject to limitations and/or permissions for usage. Operators in EU countries must consult their respective competent authorities and possess a license or a frequency assigned to them.
9.3. Waste Disposal Information
All articles displaying the crossed-out wheeled bin symbol on the body, packaging, or instruction manual must not be disposed of in normal waste bins. They should be taken to specialized waste disposal centers. Here, materials will be separated by characteristics and recycled, contributing to environmental protection.
9.4. Disclaimer
The accuracy and completeness of the contents are diligently compiled, but we do not bear responsibility for possible errors or omissions. With continuous technological development, we reserve the right to change the design and specification of the product without notice. No copy, modification, translation, or dissemination of this handbook may be made in any form without prior written authorization.
PO FUNG ELECTRONIC (HK) INTERNATIONAL GROUP COMPANY LIMITED
Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong
Website: Http://www.pofungshop.com
E-mail: sales@pofungshop.com
Print version: MINI-5_V1.0