SaltComm UZ-1P

Contents

Zigbee 3.0 PIR Motion Sensor User Manual

Model: UZ-1P

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Zigbee 3.0 PIR Motion Sensor. This device is designed to enhance your smart home security and automation by detecting human movement.

⚠️ IMPORTANT: A Zigbee 3.0 Gateway (Hub) is required for this sensor to function. The sensor does not work as a standalone device.

Diagram showing a Zigbee gateway connecting to a cloud service, a smartphone app, and the PIR motion sensor.
Diagram illustrating the necessity of a Zigbee 3.0 Gateway for the sensor to operate.

Product Presentation

Familiarize yourself with the components of your PIR Motion Sensor:

Diagram showing front, side, and back views of the PIR Motion Sensor with labels for S/S Pin, Reset button hole, LED Indicator, and Battery Cover.
PIR Motion Sensor components: S/S Pin, Reset button hole, LED Indicator, Battery Cover.
  • S/S Pin: Used for resetting the device.
  • Reset button hole: Access point for the reset button.
  • LED Indicator: Provides status feedback (e.g., blinking for pairing).
  • Battery Cover: Protects the battery compartment.

Setup Instructions

1. Install the Smart Life App

  1. Scan the QR code below or search for "Smart Life" app in the Google Play Store or Apple App Store to download and install.
  2. Create an account using your mobile number and authentication code.
Smart Life app QR codes for Google Play and App Store, along with app screenshots for adding a device.
Download the Smart Life app and follow the on-screen instructions for account creation.

2. Battery Installation

  1. Slide the back cover downwards to open the battery compartment.
  2. Install 2 AAA Alkaline batteries (LR03-1.5V) ensuring correct polarity.
  3. Push the cover back up to close the compartment securely.
Close-up of the back of the PIR Motion Sensor showing the battery compartment and model information.
Back of the sensor showing battery compartment and model details.

3. Pairing with Zigbee Gateway

  1. Ensure your mobile phone is connected to your Wi-Fi router.
  2. Open the Smart Life app, click "Add Device".
  3. Make sure your Zigbee gateway is powered on and ready for pairing.
  4. In the app, select "Wireless Gateway (Zigbee)" from "Gateway Control", then enter your Wi-Fi name and password.
  5. Select "Blink Quickly". Ensure the blue light is on and the red light is blinking quickly. If not, hold the reset button for about 5 seconds until the red indicator blinks quickly. The device will connect automatically.
  6. Alternatively, after installing batteries, click "+ Add subdevice" in the app. Ensure the indicator is blinking rapidly. If not, use the supplied pin to press the reset button until the indicator blinks. The app will search for and add the sensor successfully.

4. Mounting the Sensor

  1. Choose a suitable location for the sensor.
  2. Clean and dry the area where you intend to mount the sensor.
  3. Peel off the adhesive tape from the back of the sensor.
  4. Press firmly to secure the sensor in place.

Operating the Sensor

Key Features:

  • Alarm Alert: When motion is detected, you will receive an alarm message on your mobile phone via the Smart Life app.
  • Alarm Records: All motion detection events are recorded in the app, allowing you to review the history.
    Screenshot of a smartphone app showing a history log of motion detection events.
    Motion detection history displayed in the Smart Life app.
  • Low Power Alarm: The app will notify you when the battery power is low, prompting you to replace the batteries.
  • Device Sharing: Share your sensor with family members through the app, allowing them to monitor its status.
  • Smart Linkage: Integrate the sensor with other Tuya smart devices (e.g., lights). For example, you can set up an automation where lights turn on automatically when body movement is detected.
    Diagram showing the PIR sensor linking to various smart devices like curtains, TV, alarm, camera, and bulb.
    Scene linkage with other smart devices for enhanced home automation.

Maintenance

Battery Replacement

When the low power alarm is triggered, replace the two AAA alkaline batteries. To do this, slide down the back cover, remove the old batteries, insert new ones with correct polarity, and close the cover.

Cleaning

Use a clean, dry cloth to gently wipe the sensor's exterior. Avoid using liquid cleaners or abrasive materials.

Troubleshooting & FAQ

  • Initial Alarm Behavior: When using the motion sensor for the first time, it will alarm upon detecting body movement. After this initial detection, there will be a 30-second interval before it can alarm again, even if motion is detected within the detection angle or range.
  • Interference from Heat/Light: The motion sensor can be vulnerable to interruption by heat or light sources. Due to poor penetration, infrared radiation from the human body is easy to be shielded, making it difficult for the detector to receive the infrared signal.
  • RF Radiation & Temperature Sensitivity: The motion sensor is susceptible to interference from RF radiation. When the ambient temperature is close to human body temperature, the detection sensitivity may decrease significantly, potentially causing short-term failures.
  • No Notifications in Smart Life App: Some users report that the Smart Life app may require a premium subscription for motion notifications. To receive notifications without a premium subscription, you may need to set up custom automations within the app or integrate with a different platform that offers free notifications.
  • Motion Event Reset Time: After detecting motion, the sensor typically takes about 1 minute to reset in the absence of further motion. This means it won't trigger another immediate alert within that minute if motion stops and then restarts.

Specifications

Attribute Value
Model UZ-1P
Communication Protocol Universal Zigbee 3.0 (IEEE 802.15.4)
Smart Home Platform Compatibility Tuya, Google Assistant, Alexa, Yandex, Zigbee2MQTT, Home Assistant
Battery Type LR03-1.5V/AAA*2 (Alkaline battery)
Product Size 71 x 25 x 20 mm
Detect Distance ≤ 6 Meters
Detect Angle 128° (Horizontal and Vertical)
Operating Temperature -10°C ~ 55°C
Operating Humidity 0% ~ 95% RH
Standby Current ≤ 15uA
Alarm Current ≤ 2mA
Certification CE, RoHS, FCC
Origin Mainland China
Diagram showing 128 degree wide-angle infrared detection, both horizontal and vertical, with a detection distance of up to 6 meters.
Detection angle and distance specifications.

User Tips

  • Home Assistant & Zigbee2MQTT: Many users report excellent compatibility and performance when integrating this sensor with Home Assistant via Zigbee2MQTT. It's a highly recommended setup for advanced home automation.
  • Automation for Notifications: If using the Smart Life app and not receiving motion notifications, consider setting up custom automations within the app to trigger notifications, as direct motion notifications might be a premium feature.
  • Placement for Optimal Detection: Test the sensor's sensitivity and placement on-site to ensure it captures motion effectively in your desired area, especially considering potential interference from heat sources or RF radiation.
  • Battery Life: The sensor is designed for ultra-low power consumption, offering up to 2 years of battery life with typical usage (5 triggers per day) using standard alkaline AAA batteries.

Warranty and Support

For any issues or further assistance, please refer to the official user manual PDF or contact the seller directly. The user manual (PDF) can be accessed via the following link: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.