1. Introduction
Thank you for choosing our Electric Scooter Brake Lever Protective Silicone Lever Grips. These high-quality silicone covers are designed to protect your scooter's brake levers and enhance grip, providing a more comfortable and secure riding experience. This manual provides essential information for installation, maintenance, and safe use of the product. Please read it carefully before installation.

2. Safety Warnings
WARNING:
- To avoid danger of suffocation, keep this plastic bag away from babies and children.
- Do not use this bag in cribs, beds, carriages or play pens. This bag is not a toy.
Always verify model compatibility before installation to ensure proper fit and function. Refer to the product diagram for specific installation details.

3. Specifications
| Attribute | Detail |
|---|---|
| Type | Scooter Brakes (Protective Cover) |
| Material | Silicone |
| Fitment | For Xiaomi Electric Scooter (M365 Pro, Mi3, Mi4, 3Lite, Mi5, 5Pro) |
| Voltage | 36V (Implied for compatible scooters) |
| Is Customized | Yes |
| High-concerned chemical | None |
| Package Weight | 0.026 kg |
| Package Dimensions | 14cm (L) x 13cm (W) x 1cm (H) |
4. Package Contents
The package typically includes:
- 1 x Protective Cover Case (for brake lever)
Please note that the quantity may vary based on the specific product variant purchased (e.g., a pair of covers).

5. Installation Instructions
These silicone grips are designed for easy installation. Please follow these steps:
- Clean the Brake Lever: Ensure the brake lever surface is clean and dry before installation. Remove any dirt, dust, or grease.
- Prepare the Grip: The silicone material is flexible. You may find it easier to install if you slightly stretch the opening of the grip.
- Slide On: Carefully slide the silicone grip over the end of the brake lever. Apply gentle, even pressure to work the grip along the length of the lever until it is fully seated and covers the desired area.
- Adjust Position: Once installed, adjust the grip to ensure it sits snugly and does not interfere with the brake lever's movement or your hand's comfort.
Refer to the images below for visual guidance on how the grips appear when correctly installed.


These grips are also suitable for kickstands to provide protection and a splash of color.

6. Operating Instructions
Once installed, the silicone grips require no special operation. They are designed to provide a protective layer and improved grip for your scooter's brake levers during normal use. Ensure the grips do not impede the full range of motion of the brake levers before riding.
7. Care and Maintenance
- Cleaning: The silicone grips can be easily cleaned with a damp cloth and mild soap. Rinse thoroughly and allow to air dry completely before re-installation or use.
- Inspection: Periodically inspect the grips for any signs of wear, tear, or damage. Replace them if they become cracked, brittle, or lose their grip.
- Storage: Store the grips in a cool, dry place away from direct sunlight when not in use for extended periods.
8. Troubleshooting
- Grip is difficult to install: Ensure the brake lever is clean and dry. You can apply a small amount of rubbing alcohol or soapy water to the inside of the grip to help it slide on, allowing it to evaporate or dry afterward.
- Grip feels loose: Ensure the grip is fully seated on the lever. If it continues to feel loose, it may not be compatible with your specific brake lever model.
- Color discrepancy: Due to light differences and monitor settings, the item's color may appear slightly different from pictures. If the color received is significantly different from what was ordered, please contact customer support.
9. User Tips
- Users report that the silicone material is of good quality and works effectively.
- The grips provide an excellent initial fit and feel.
- Always double-check the color received against your order, as slight variations or incorrect shipments can occur.
10. Frequently Asked Questions
- Q: Are these grips compatible with all electric scooters?
- A: These grips are specifically designed for Xiaomi Electric Scooters, including models like M365 Pro, Mi3, Mi4, 3Lite, Mi5, and 5Pro. Please verify your scooter model for compatibility.
- Q: How many grips come in one package?
- A: Typically, one protective cover case is included per package, but some listings may offer pairs. Please check the product description at the time of purchase.
- Q: Can these grips be used on other parts of the scooter?
- A: While primarily designed for brake levers, some users have found them suitable for protecting kickstands or other similar-sized components.
11. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.
A user manual in PDF format may be available for download. Please refer to the product page for any linked documents.
Made in China