Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LTWOO R9 2x11 Speed Road Bike Groupset. This groupset is designed for road bikes, small wheel road bikes, and folding bikes, offering precise and reliable mechanical shifting performance. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Always wear appropriate safety gear when working on or riding your bicycle.
- Ensure all components are securely fastened and torqued to manufacturer specifications.
- Improper installation or adjustment can lead to serious injury or damage to the bicycle. If you are unsure about any installation steps, consult a professional bicycle mechanic.
- Keep small parts and tools out of reach of children.
Warning: Keep small components and tools out of reach of children under 3 years old. (General caution for small parts.)
Product Overview
The LTWOO R9 groupset includes the following main components:
- Shifters (Left & Right): For controlling front and rear derailleurs.
- Front Derailleur: Available in Clamp Band Mount or Brazed-On Mount.
- Rear Derailleur: For 11-speed cassettes.
Setup and Installation
Before beginning installation, ensure you have the necessary tools and a clean workspace. It is recommended to consult a professional bicycle mechanic if you are unfamiliar with groupset installation.
1. Preparation
- Remove all protective films and packaging from the components.
- Ensure your bicycle frame is compatible with the R9 groupset (e.g., correct bottom bracket shell, derailleur hanger, and cable routing).
2. Shifter Installation
- Mount the left and right shifters onto your handlebars. Position them ergonomically for comfortable reach to the brake levers and shift paddles.
- Secure the shifters using the appropriate clamp bolts, ensuring they are tight enough to prevent rotation but not overtightened.
- Route the shift cables and brake cables through your handlebars and frame according to your bike's design.
3. Front Derailleur Installation
- For Clamp Band Mount: Slide the front derailleur clamp onto the seat tube at the correct height, ensuring the outer cage plate is parallel to the large chainring.
- For Brazed-On Mount: Attach the front derailleur to the frame's brazed-on tab.
- Secure the derailleur bolt, ensuring proper alignment and clearance over the chainrings.
- Attach the front derailleur cable and tension it appropriately.
4. Rear Derailleur Installation
- Thread the rear derailleur onto the derailleur hanger of your bike frame.
- Attach the rear derailleur cable and tension it.
- Adjust the high and low limit screws to prevent the chain from overshifting off the cassette.
- Adjust the B-tension screw to set the proper gap between the upper guide pulley and the largest cog.
5. Cable Adjustment
Fine-tune cable tension for both front and rear derailleurs to ensure smooth and precise shifting across all gears. Test all gear combinations.
Operating Instructions
The LTWOO R9 groupset features a mechanical shifting system. Familiarize yourself with the shifter levers for optimal control.
Shifting Gears
- Rear Derailleur (Right Shifter):
- To shift to a larger cog (easier gear), push the main lever inwards.
- To shift to a smaller cog (harder gear), press the smaller lever behind the main lever.
- Front Derailleur (Left Shifter):
- To shift to the larger chainring, push the main lever inwards.
- To shift to the smaller chainring, press the smaller lever behind the main lever.
Always pedal lightly when shifting to ensure smooth transitions and prevent chain damage.
Maintenance
Regular maintenance will prolong the life and performance of your groupset.
1. Cleaning
- Clean the groupset components (derailleurs, chain, cassette, chainrings) regularly with a degreaser and a brush.
- Wipe down shifters and brake levers with a soft, lint-free cloth. Avoid harsh chemicals that may damage finishes.
2. Lubrication
- Lubricate your chain regularly with appropriate bicycle chain lubricant, especially after riding in wet conditions.
- Apply a small amount of lubricant to derailleur pivots and jockey wheels to ensure smooth operation.
3. Inspection
- Periodically check all bolts for proper torque.
- Inspect shift and brake cables for fraying or corrosion. Replace as needed.
- Check derailleur hangers for alignment. A bent hanger can cause poor shifting.
- Monitor chain and cassette wear. Worn components can lead to poor shifting and premature wear of other parts.
4. Storage
- Store your bicycle in a dry place, ideally at room temperature (15°C - 35°C / 59°F - 95°F), to prevent corrosion and material degradation.
- If storing for an extended period, ensure the chain is clean and well-lubricated.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty shifting gears (slow or imprecise) |
|
|
| Chain rubs on front derailleur cage |
|
|
| Excessive noise from drivetrain |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand Name | LTWOO |
| Model Number | R9 |
| Gears | 22 Speed (2x11s) |
| Derailleur Groupset Type | Mechanical Derailleur system |
| Type (Components) | Rear Derailleur, Front Derailleur, Shifters |
| Material | Alloy |
| Rear Derailleur Total Capacity | 23-32T |
| Shifter Weight | Approx. 525.7g ![]() |
| Front Derailleur Weight (Clamp Band) | Approx. 131.0g ![]() |
| Front Derailleur Weight (Brazed-On) | Approx. 101.0g ![]() |
| Rear Derailleur Weight | Approx. 247.6g ![]() |
| Origin | Mainland China |
| Certifications | CE, RoHS, UKCA |
| Package Dimensions (L x W x H) | 28cm x 21cm x 18cm |
| Package Weight | 1.5 kg |
User Tips
- For best shifting performance, ensure your chain is always clean and adequately lubricated.
- When installing new cables, pre-stretch them by shifting through all gears multiple times and then re-adjusting tension. This helps prevent shifting issues later.
- If you experience persistent shifting problems, check your derailleur hanger for straightness. Even a slight bend can significantly impact performance.
- Consider using a torque wrench for all bolt installations to prevent overtightening or undertightening, which can damage components or lead to failure.
Warranty and Support
For technical support, warranty claims, or further inquiries regarding your LTWOO R9 groupset, please contact the manufacturer or their authorized representatives.
Manufacturer Information:
- Manufacturer: Xiamen Yantaizheng Industry and Trade Co., Ltd.
- Address: Room 902, Building 3, No. 455, Erhuan South Road, Tongan District, Xiamen, Fujian, China
- E-mail: ray@zrace.cn
- TEL: +86 0592-7777081
EU Authorized Representative:
- Representative: TOCYA TRADING
- Address: 79 rue de patay, 75013, Paris
- E-mail: TOCYATRADING75013@outlook.com
A user manual in PDF format is available for download: LTWOO R9 User Manual (PDF)
Disposal & Recycling
Please dispose of this product and its packaging responsibly according to local regulations. Do not dispose of with general household waste.
For packaging elements, separate and deposit into the appropriate recycling bins (e.g.,



