TDD Galaxy Pro II LED Steering Wheel

Contents

TDD Galaxy Pro II LED Steering Wheel User Manual

Model: Galaxy Pro II LED Steering Wheel (LSW-BM / SW-LED-01)

Brand: TDD

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your TDD Galaxy Pro II LED Steering Wheel. Please read all instructions carefully before use to ensure optimal performance and to prevent damage or injury.

The TDD Galaxy Pro II LED Steering Wheel is a custom carbon fiber steering wheel featuring an integrated LED screen and dynamic UI icons, designed to enhance your driving experience by displaying real-time vehicle data and offering app-controlled customization.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

Important Safety Notice

  • Installation requires removal of the steering wheel airbag.
  • Professional installation is strongly recommended.
  • Incorrect installation may trigger airbag warning lights or system faults.
  • Disconnect the vehicle battery before installation (wait at least 10 minutes).

3. Package Contents

The TDD Galaxy Pro II LED Steering Wheel package typically includes:

  • TDD Galaxy Pro II LED Steering Wheel (Custom Carbon Fiber with LED Screen)
  • OBD Harness
  • Power Boost Cable (if applicable for installation method)
  • Necessary wiring and connectors
  • User Manual (PDF version available for download)

Please verify all components are present and undamaged upon receipt.

4. Installation Instructions

Professional installation is strongly recommended due to the complexity and safety implications involving the vehicle's airbag system.

Before beginning installation, ensure the vehicle battery is disconnected and wait at least 10 minutes to allow the airbag system to discharge.

General Connection Overview

The system connects via the vehicle's OBD II port. The TDD OBD Reading Box Smart ONE is used for data acquisition.

  1. Connect Connector B to Socket Port A.
  2. Connect Connector C to the Car OBD II.
  3. If applicable, use Connector D as the OBD II socket.
  4. The Power boost cable serves as a backup power cable for Installation Method 2.
OBD Harness to OBD II connection diagram
Figure 1: OBD Harness to OBD II Connection Diagram

Installation Methods

There are three primary installation methods depending on your vehicle's wiring configuration:

Method 1: For Steering Wheels with 12V and Ground Cables

This method is primarily for EU and USA car models. It involves connecting the 12V and Ground cables from the steering wheel to the vehicle's wiring. The Clock Spring Upper Plug is utilized for these connections.

  • A: 12V Cable
  • B: Ground Cable
  • IN B+ cable connected to A Cable
  • GND cable connected to B Cable
  • OUT B+ Cable: No need to use, it is a backup cable.

Method 2: For Steering Wheels Without 12V Power Cable

This method is mainly for Japanese and some older car models. It involves connecting the Horn cable through the Clock Spring and Airbag Module.

  • A: Horn Cable
  • B: Connect point for Horn cable
  • C: Horn cable on down side clock spring, power could go through A to C.
  • IN B+ cable connected to A Cable.
  • OUT B+ cable connected to B point.
  • GND cable connected to ground.
  • OBD Box harness power boost cable Connects to C.

Method 3: Build 12V and Ground Cable

This method is mainly for Japanese and Ford cars, where you may need to create the 12V and ground connections using empty holes on the Clock Spring socket.

  • A and B: Empty hole on Upper clock spring socket.
  • C and D: Empty hole on Down clock spring socket.
  • Insert cables to build Power for A to C, and build Ground for B to D.
  • The clock spring should have pin for A,B,C,D points.
  • Outside power cable insert point C, outside ground cable insert point D.
  • IN B+ cable connected to A Cable.
  • GND cable connected to B Cable.
  • OUT B+ Cable: No need to use, it is backup cable.

Wire Cutting and Ignition Switch Connection (If Required)

Some car models may require specific wiring modifications. This is necessary if the OBD box does not start automatically after installation or if it fails to enter sleep mode when the car is off (e.g., Mustang, Dodge, Jeep, Lincoln).

Diagram showing how to cut and connect wires for specific car models
Figure 2: Wire Cutting and Connection Diagram

Step 1: Cut the wire. Pay attention to the position of the wire to be cut as indicated in the diagram.

Step 2: Connect the wire. The cable A needs to connect to a power cable that provides power ONLY when the car is in the start status. This prevents battery drain. The OBD Box will enter OFF mode when the car is off and turn on when the car starts.

App Matching

To match the steering wheel with the app:

  • Hold and press button A on the steering wheel.
  • The matching can be done when the screen is in matching mode and within a specific time frame.
  • Hold and press both buttons to turn on the screen for matching mode.
Diagram for matching the LED Steering Wheel with the app
Figure 3: App Matching Instructions

5. Operation

The TDD Galaxy Pro II LED Steering Wheel features a large color screen (23x38mm) and dynamic UI icons to display various vehicle data. It offers 8 new system versions and 8 distinct UI experiences to suit different driving styles and preferences.

LED Display Functions

The integrated LED screen can display more than 14 functions to help you drive better. Key data points include:

  • RPM (Revolutions Per Minute)
  • Speed (km/h or mph, unit can be set)
  • Engine Load
  • Oil Status / Remained Oil
  • Battery Voltage
  • Engine Temperature
  • Water Temperature
  • Turbocharging
  • Location (GPS coordinates)
  • Driving Data Record
  • And many more dynamic icons for various vehicle statuses.
Diagram showing various data displayed on the LED screen and phone app
Figure 4: Data Displayed on LED Screen and App
All-New Upgraded Dynamic Icons for Galaxy Pro II
Figure 5: Dynamic Icons for Galaxy Pro II
Big Color Screen dimensions and clarity
Figure 6: Big Color Screen for Better Visibility

App Control (iOS & Android)

The dedicated mobile application allows for comprehensive control and customization of your steering wheel's features. The app displays real-time and instant data from the car, providing a more engaging driving experience.

  • Data Detail: View detailed driving data and records.
  • Paddle Shifter Flexible Setup: Customize RPM settings for LED lights to flash (1K to 9.9K).
  • Color Setting: Adjust the color of the LED lights on the steering wheel.
iOS/Android App interface for data display, shifter setup, and color settings
Figure 7: App Control Interface

Demonstration Video

Video 1: Demonstration of turn signal LED display and RPM lights on the TDD Galaxy Pro II LED Steering Wheel.

6. Maintenance & Storage

  • Store the Galaxy Pro steering wheel display in a dry, well-ventilated environment. Avoid direct sunlight, high humidity, or extreme temperatures to prevent internal electronic damage or screen aging.
  • For daily cleaning, use a soft microfiber cloth lightly dampened with a small amount of alcohol to gently wipe the screen and housing. Do not spray alcohol directly onto the unit.
  • Do not rinse with water or expose the unit to moisture. Avoid liquid intrusion into connectors, wiring ports, or internal components to prevent short circuits or malfunction.

7. Troubleshooting

  • Airbag Warning Lights / System Faults: If these occur after installation, it indicates incorrect installation. Professional installation is strongly recommended to avoid such issues.
  • OBD Box Not Starting / Not Entering Sleep Mode: If the OBD box does not start automatically or enter sleep mode, refer to the "Wire Cutting and Ignition Switch Connection" section in the installation instructions. This issue is common in some car models (e.g., Mustang, Dodge, Jeep, Lincoln).
  • Display Data Inaccuracies or Missing Functions: The angle sensor and parking assistance functions may vary between cars. Some OBD II systems may not support all functions. If your car's OBD II does not support certain functions, the system will use standard data for your steering wheel. Contact support if you have concerns about specific data displays.
  • Steering Wheel Not Matching with App: Ensure the steering wheel is in matching mode and follow the app matching instructions carefully.

8. Specifications

Feature Detail
Product Type Steering Wheels
Product Name New Style
Model LSW-BM / SW-LED-01
Brand Name TDD
Material Real Carbon Fiber (3K 240g), Leather (Italian Suede, Super Micro-Fiber, Lichi Texture, Smooth, Perforated, Nappa)
Origin Mainland China
Screen Size 23x38mm (Big Color Screen)
UI Themes 8 distinct UI experiences
App Compatibility iOS, Android
Package Dimensions Length: 43cm, Width: 42cm, Height: 19cm
Package Weight 4.0 kg
Image illustrating the materials used: Solid, Light, Soft, Durable 3K 240g Carbon Fiber
Figure 8: Material Quality - 3K 240g Carbon Fiber
Diagram showing the 6 resin layers, carbon fiber, and ABS/Plastic construction
Figure 9: Steering Wheel Construction Layers
Diagram of various leather types and colors available for customization
Figure 10: Available Leather Options

9. User Tips

  • Vehicle Compatibility: Always confirm compatibility with your specific vehicle model and year before purchase and installation. For example, while the product is advertised for Toyota 86 and Subaru BRZ 2012-2021, it's crucial to verify for other models like an Infiniti G37x 2013.
  • Data Display Limitations: Be aware that some advanced functions like angle sensors or parking assistance data might not be fully supported by all vehicle OBD II systems. If your car doesn't support these, the steering wheel will default to standard data.
  • Customization: The steering wheel is highly customizable in terms of materials (carbon fiber types, leather options) and stitching. Explore these options to match your vehicle's interior and personal style.
  • Software Updates: The software and hardware can be upgraded to the latest model by the R&D team. Contact the manufacturer for details on available updates.

10. Warranty & Support

Warranty

This product comes with a 1-year warranty. Please refer to the detailed warranty policy for terms and conditions.

Manufacturer Information

  • Manufacturer: Guangzhou Think Different Dynamics Technology Co., Ltd.
  • Address: Room 401, Building 13, Longshan Industrial Park, No. 260 Yinglong Road, Tianhe District, Guangzhou
  • Contact Email: info@tddynamics.com

EU Authorized Representative

  • Representative: Sophie Dupont
  • Address: 8 bis rue Abel 75012 Paris, France
  • Contact Email: Sophie.Dupont@proconseilfr.com
  • Telephone: +33-0780843245

For any questions regarding installation, operation, or product issues, please contact the manufacturer or their authorized representative.

A detailed user manual in PDF format is available for further reference. You can find it by searching for 'Item guides & documents' on the product page or contacting support.

11. Compliance Information

This product complies with relevant European and UK regulations. The following markings are present on the product:

  • CE Mark: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
  • UKCA Mark: Indicates conformity with the applicable requirements for products sold within Great Britain (England, Scotland, and Wales).
  • RoHS Mark: Indicates compliance with the Restriction of Hazardous Substances Directive.
  • WEEE Symbol: The crossed-out wheeled bin symbol indicates that the product should not be disposed of with household waste. It should be handed over to an applicable collection point for the recycling of electrical and electronic equipment.

For detailed information on waste disposal and recycling, please consult local regulations or visit www.quefairedemesdechets.fr (for France).

© 2024 TDD. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.