1. Introduction
The IKSLED IKS-17T Smart Touch Dimmer is designed for controlling LED strip lighting with convenience and advanced features. This compact switch offers touch-sensitive operation for turning lights on/off and adjusting brightness, along with a dual memory function to retain your preferred settings.
Key Features:
- Touch On/Off Switch: Simple touch to toggle power.
- Stepless Dimming: Long press to smoothly adjust LED brightness from 0% to 100%.
- Dual Memory Function:
- Brightness Memory: Remembers the last brightness setting before power-off.
- Status Memory: Remembers the On/Off status before power-off.
- Indicator Light Control: Quickly double-tap the switch to turn the indicator light on or off.
- Compact Design: Small size allows for discreet installation, such as embedding in wood cabinets.
2. Technical Specifications
| Parameter | Details |
|---|---|
| Model Number | IKS-17T |
| Working Voltage | DC 3V, 3.7V, 5V, 12V, 24V (Compatible with constant voltage adapters only) |
| Max. Load (3V) | < 5W |
| Max. Load (3.7V) | < 7W |
| Max. Load (5V) | < 12W |
| Max. Load (12V) | < 30W (from seller description, OCR says <36W) |
| Max. Load (24V) | < 40W (from seller description, OCR says <48W) |
| Current | 3A |
| Sensing Method | Short touch: Turn On/Off; Long press: Stepless dimming |
| Material | Plastic |
| Hole Size Required | Ø17mm |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| Certifications | SAA, RoHS, LVD, EMC, CE, CCC |
3. Installation
Wiring:
Connect the wires exactly as shown in the wiring diagram below. Ensure correct polarity (positive/negative) for both input and output connections.
Fixing the Switch:
The switch requires a Ø17mm hole for installation. Securely fix the induction switch in place to prevent movement during use. Movement can cause the switch to constantly re-detect its environment, leading to malfunction.
Power On:
After completing the wiring and fixing the switch, turn on the power to use. It is crucial to turn off the power before installation and only turn it back on after the switch is securely fixed.
4. Operation
The IKS-17T touch dimmer offers intuitive control over your LED lighting:
- Turn On/Off: A short touch on the metallic surface of the switch will toggle the LED lights on or off.
- Adjust Brightness (Stepless Dimming): Press and hold your finger on the switch surface to continuously adjust the brightness. Release your finger when the desired brightness level is reached.
- Indicator Light Control: To turn the blue indicator light on or off, quickly double-tap the switch.
5. Usage Precautions
WARNING: Please strictly follow the instructions and safety tips below. Use the product with caution.
- This induction switch is prohibited from being used to control the following equipment: Motors, Solenoid valves, Solar lights, Constant current lamps, and Other inductive loads.
- Ensure your power adapter is a constant voltage DC power supply. This switch is not compatible with constant current adapters.
- Always ensure the working voltage of the adapter matches the required voltage of the LED light (e.g., 3.7V, 5V, 12V, or 24V).
- Verify correct polarity (+/-) connections during wiring. Incorrect polarity can damage the device.
- Securely fix the switch in place before powering on. A loose switch can malfunction due to constant environmental re-detection.
6. Troubleshooting
Symptom: Light cannot be controlled
After connection, the LED light stays permanently on or permanently off, and cannot be controlled by the switch.
Possible Causes & Solutions:
-
Voltage Mismatch: The working voltage of the adapter does not match the LED light.
Solution: Confirm the adapter is a constant voltage DC power supply (e.g., 3.7V, 5V, 12V, 24V) and that the LED light requires the same voltage.
-
Reverse Polarity: The input/output or positive/negative (+/-) poles are connected in reverse.
Solution: Turn off the power immediately. Verify the connections for input/output and positive/negative (+/-) poles. If reversed, disconnect the power and reconnect them correctly as per the wiring diagram.
-
Installation Error (Loose Switch): The switch was fixed after power-on, or it is not fixed securely and keeps moving during use, causing it to constantly re-detect the environment.
Solution: Turn off the power. Securely fix the induction switch in place to prevent any movement. Then, turn the power back on to test.
7. Maintenance
To ensure the longevity and optimal performance of your IKSLED Smart Touch Dimmer:
- Keep the switch clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the switch to excessive moisture or extreme temperatures.
- Do not use harsh chemicals or abrasive cleaners on the switch surface.
- Regularly check wiring connections to ensure they remain secure.
8. User Tips
- If the indicator light stops working or the dimmer becomes unresponsive, first check all wiring connections for tightness and correct polarity. Ensure the switch is firmly mounted and not moving.
- Always use a stable and compatible power supply to prevent unexpected failures.
9. Warranty & Support
Warranty:
This product comes with a 1-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use conditions.
Customer Support:
For customization, wholesale inquiries, or technical assistance, please contact us:
- WhatsApp: +8615289643001
You can also refer to the official user manual PDF for additional details: View User Manual (PDF)