OPUYYM Bitaxe NerdOCTaxey Rev3.1 12T

Contents

Bitaxe NerdOCTaxey Rev3.1 12T Solo Miner Instruction Manual

Model: Bitaxe NerdOCTaxey Rev3.1 12T

1. Product Overview

The Bitaxe NerdOCTaxey Rev3.1 12T is a state-of-the-art home solo miner designed for Bitcoin lottery mining. It integrates 6 cutting-edge BM1370 ASIC chips, delivering a computing power of 12 TH/s. This device is built on an open-source philosophy, encouraging community-driven development.

Bitaxe NerdOCTaxey Rev3.1 12T Solo Miner with LCD display and fans

Figure 1: Bitaxe NerdOCTaxey Rev3.1 12T Solo Miner

Video 1: Bitaxe NerdOCTaxey Rev3.1 12T in operation, displaying real-time mining statistics on the LCD.

2. Setup Guide

Follow these steps to set up your Bitaxe NerdOCTaxey Rev3.1 12T solo miner.

2.1. Step 1: Power On the Device

  1. Connect the power supply unit to the miner and then to a power outlet.
  2. Ensure the device powers on and the LCD display activates.

2.2. Step 2: Configure the Network

The device features built-in Wi-Fi for remote management.

  1. Using an iPhone, find the Wi-Fi network broadcast by the Bitaxe (e.g., "Bitaxe 0690") and connect to it.
  2. For iPhones, clicking 'Connect' should automatically redirect you to the network configuration page. Android phones may require manual navigation to the device's IP address in a web browser.
  3. Enter the Wi-Fi name (SSID) and password for your local network.
  4. Once connected, a "Connected" message will appear, indicating a successful connection.

2.3. Step 3: Set Operating Frequency and Voltage

  1. Enter the IP address displayed on the device's LCD into a web browser to log in to the device's interface.
  2. Click on 'Settings'.
  3. Set the frequency to 525 and the voltage to 1100.
  4. Click 'Save'.
  5. Click 'Restart' to apply the changes.

2.4. Step 4: Modify Wallet Address

  1. In the device's web interface, click on 'Mining Pool Settings'.
  2. Change the wallet address to your own Bitcoin wallet address.
  3. Click 'Save' and 'Restart' to ensure the new wallet address is active.
Diagram illustrating the setup steps for the Bitaxe solo Miner, including power connection, network configuration, frequency/voltage settings, and wallet address modification.

Figure 2: Visual guide for Bitaxe solo Miner setup steps.

For a visual guide, refer to the user manual PDF available at User Manual (PDF).

3. Operating Instructions

Once configured, the Bitaxe NerdOCTaxey Rev3.1 12T will begin mining automatically. The removable 0.91" SSD1306 OLED I2C display provides real-time monitoring of key operational parameters.

3.1. Monitoring Performance

The OLED display shows:

  • Hash Rate: Current mining speed (e.g., GH/s).
  • Temperature: Operating temperature of the ASIC chips (e.g., °C).
  • Power Consumption: Real-time power usage (e.g., W).
  • Fan RPM: Speed of the cooling fans.
  • Voltage (Vi): Input voltage to the chips.
  • Current (A): Current draw.

3.2. Remote Management

Access the device's web interface via its IP address for advanced settings, firmware updates, and detailed statistics.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your miner.

  • Cleaning: Periodically clean the fans and heatsink to prevent dust buildup, which can impede cooling efficiency. Use compressed air or a soft brush.
  • Firmware Updates: Check the official website or the device's web interface for available firmware updates to ensure you have the latest features and security patches.
  • Environmental Conditions: Operate the miner in a well-ventilated area, away from direct sunlight and excessive humidity. Maintain an ambient temperature within recommended limits to prevent overheating.

5. Troubleshooting

5.1. Device Not Powering On

  • Ensure the power cable is securely connected to both the miner and the power outlet.
  • Verify that the power outlet is functional.
  • Check the power supply unit for any visible damage or indicator lights.

5.2. No Wi-Fi Connection

  • Confirm that your local Wi-Fi network is active and broadcasting.
  • Double-check the Wi-Fi name (SSID) and password entered during setup.
  • Restart the miner and attempt to connect again.
  • Ensure the miner is within range of your Wi-Fi router.

5.3. Low Hash Rate or Overheating

  • Check the fan RPM on the OLED display. If fans are not spinning or are slow, inspect for obstructions or damage.
  • Clean any dust from the heatsink and fans.
  • Ensure the miner is in a well-ventilated area and not enclosed.
  • Verify that the frequency and voltage settings are correctly applied in the web interface.

6. Specifications

Feature Detail
Model Number Bitaxe NerdOCTaxey Rev3.1 12T
Brand Name OPUYYM
ASIC Chip BM1370 (6 chips)
Hash Rate 12 TH/s
Power Consumption 200W
Energy Efficiency 16.7 W/TH
Connectivity Built-in Wi-Fi (ESP32-S3-WROOM-1)
Monitoring Removable 0.91" SSD1306 OLED I2C display
Cooling 40x40mm aluminum heatsink with 5V fan
Weight 10 KG
Package Dimensions (L x W x H) 35 cm x 25 cm x 20 cm
Origin Mainland China

7. User Tips

Based on common user inquiries and feedback, here are some tips for an optimal experience:

  • Initial Setup: Pay close attention to the Wi-Fi configuration steps. If using an Android phone, you might need to manually navigate to the device's IP address in your browser after connecting to its Wi-Fi hotspot.
  • Monitoring: Regularly check the OLED display for hash rate, temperature, and power consumption to ensure the miner is operating efficiently.
  • Cooling: Position the miner in an open space to maximize airflow to the fans and heatsink.
  • Wallet Address: Always double-check your wallet address before saving to prevent loss of mining rewards.

8. Warranty & Support

8.1. Technical Support

Our team of experienced technicians is available 24/7 to assist you with any technical issues you may encounter with your Bitaxe NerdOCTaxey Rev3.1 12T. Whether it's a problem with setup, operation, or software updates, we are ready to help.

8.2. Warranty

We offer a 6-month warranty on the Bitaxe NerdOCTaxey Rev3.1 12T. This warranty covers any manufacturing defects in the device. If you experience any issues within the warranty period, we will repair or replace your machine free of charge.

9. Frequently Asked Questions (FAQ)

Q1: What is the hash rate of the Bitaxe NerdOCTaxey Rev3.1 12T?
A: The Bitaxe NerdOCTaxey Rev3.1 12T has a hash rate of 12 TH/s.
Q2: How much power does the Bitaxe NerdOCTaxey Rev3.1 12T consume?
A: The Bitaxe NerdOCTaxey Rev3.1 12T consumes 200W of power.
Q3: Can I use the Bitaxe NerdOCTaxey Rev3.1 12T in any country?
A: Yes, the Bitaxe NerdOCTaxey Rev3.1 12T operates on a global voltage standard, so you can use it anywhere in the world without worrying about voltage compatibility.
Q4: How do I set up the Bitaxe NerdOCTaxey Rev3.1 12T?
A: Setting up the Bitaxe NerdOCTaxey Rev3.1 12T is straightforward. Simply attach the screen, plug in the power cable, connect to Wi-Fi, change a few settings (frequency, voltage, wallet address), and you're ready to go. A detailed setup guide is provided in Section 2 of this manual and in the included PDF user manual.

For further assistance, please contact our support team.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.