Witch Hat Lamp Witch Hat Lamp

Contents

Stained Glass Witch Hat Lamp

USB Powered Creative Table Lamp Night Light

Model: Witch Hat Lamp

1. Important Safety Information

Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage or personal injury. Keep this manual for future reference.

  • Inspect the product before each use. Do not use if the product is damaged.
  • Follow all installation and operation guidelines to avoid injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not expose the lamp to water or moisture.
  • Handle with care to avoid cuts or injuries from the stained glass.
  • Do not use this product for purposes other than its intended use as a decorative table lamp.

2. Product Overview

The Stained Glass Witch Hat Lamp is a unique USB-powered table lamp designed to add a creative and decorative touch to your living space, especially suitable for themes like Halloween. It features a stained glass design in the shape of a witch's hat, providing a warm and ambient light.

Stained Glass Witch Hat Lamp (Purple/Red)
Purple/Red variant of the Witch Hat Lamp
Stained Glass Witch Hat Lamp (Green)
Green variant of the Witch Hat Lamp
Stained Glass Witch Hat Lamp (Orange/Brown)
Orange/Brown variant of the Witch Hat Lamp
Stained Glass Witch Hat Lamp (Purple)
Purple variant of the Witch Hat Lamp

3. Setup Instructions

  1. Unpacking: Carefully remove the lamp from its packaging. Inspect for any damage. Remove any protective films or packaging materials from the device.
  2. Placement: Place the lamp on a stable, flat surface away from water, moisture, and direct heat sources.
  3. Power Connection: Connect the provided USB cable to the lamp's power input. Then, plug the USB-A connector into a certified 5V USB power adapter (not included) or a compatible USB port.
    Hand holding USB-A connector
    USB-A connector of the power cable
    Hand holding inline switch on USB cable
    Inline power switch on the USB cable

4. Operating Instructions

  1. Turning On/Off: Press and hold the power button located on the inline switch of the USB cable for approximately 3 seconds to turn the lamp on or off.
  2. Changing Modes: Once the lamp is on, short press the power button to cycle through different lighting modes or brightness settings (if applicable).

5. Maintenance

  • Cleaning: To clean the lamp, ensure it is unplugged from the power source. Wipe the stained glass and base with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Storage: When not in use, turn off the device and store it in a dry, safe place, away from direct sunlight and extreme temperatures. Keep out of reach of children.
  • Bulb Replacement: This lamp includes bulbs that are typically integrated and not user-replaceable. If the light source fails, please contact customer support.

6. Troubleshooting

  • Lamp does not turn on:
    • Ensure the USB cable is securely connected to both the lamp and the power source.
    • Verify that the 5V USB power adapter or USB port is functioning correctly.
    • Press and hold the power button for 3 seconds to ensure it's properly activated.
  • Light flickers or is dim:
    • Check the power connection for any loose contacts.
    • Ensure the power source provides stable 5V output.

7. Specifications

Feature Specification
Item Type Table Lamps
Power Source DC
Voltage 5V
Nominal Voltage 6 V
Luminous Flux <60
Bulbs Included Yes
Batteries Included No
PCBA Included No
High-concerned chemical None
Origin Mainland China

Package Dimensions & Weight

  • Length: 10 cm
  • Width: 10 cm
  • Height: 5 cm
  • Weight: 0.27 kg

8. User Tips

  • For best aesthetic results, place the lamp where its stained glass patterns can be appreciated, such as on a bedside table or a living room accent table.
  • Consider using a USB wall adapter for a more stable power supply compared to some computer USB ports.

9. Manufacturer & EU Representative Information

  • Manufacturer: gongqingcheng feiding E-commerce Co., Ltd
  • EU Authorized Representative: E-CrossStu GmbH, DE-DE-69 Mainzer Landstrasse, Frankfurt am Main Hessen 60329
  • Contact: Yating He, +49-69332967674, E-crossstu@web.de

This product complies with applicable safety and regulatory requirements in the market where it is sold, as indicated by the CE mark.

10. Warranty & Support

For any questions, issues, or warranty claims regarding your Stained Glass Witch Hat Lamp, please contact the seller or manufacturer directly using the contact information provided above. Please retain your proof of purchase for warranty purposes.

© 2024 All Rights Reserved. This manual is for informational purposes only.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.