1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your SNDWAY Mini Metal Laser Distance Meter. Please read this manual thoroughly before using the device and keep it for future reference.

Figure 1: SNDWAY Handheld Mini Laser Distance Meter. Features include millimetre precision and a rechargeable battery.
2. Safety Information
This device emits a laser. Please observe the following safety precautions:
- Laser Class: This product is a Class 2 laser device (Laser hazard level: Class 2, <1mW).
- Do not stare directly into the laser beam.
- Do not aim the laser beam at people or animals.
- Do not disassemble the device; laser radiation can be harmful.
- Keep the device out of reach of children.
3. Product Overview
The SNDWAY Mini Metal Laser Distance Meter is a compact, high-precision tool designed for various measurement tasks. It features a durable metal casing, a clear horizontal display, and a rechargeable battery.
3.1. Package Contents
- Laser Distance Meter (Model SW-B40, SW-B50, or SW-B60 depending on purchase)
- USB Type-C Charging Cable
- User Manual (this document and potentially a printed version)

Figure 2: Available models (SW-B40, SW-B50, SW-B60) with their respective maximum measuring ranges.
3.2. Device Features
- High Precision: Millimeter-level accuracy for reliable measurements.
- Rechargeable Battery: Built-in 850mAh lithium battery with Type-C USB fast charging.
- Compact Design: Pocket-sized for easy portability (10cm length, 1.8cm thickness).
- Clear Display: Horizontal screen with large fonts for easy readability.
- Multiple Measurement Modes: Supports single, continuous, area, volume, and Pythagorean measurements.

Figure 3: The device's pocket-sized dimensions (10cm length, 1.8cm thickness) for easy carrying.
4. Setup
4.1. Charging the Device
Before first use, fully charge the device. The laser distance meter is equipped with an 850mAh lithium battery and supports Type-C USB fast charging.
- Locate the Type-C USB port on the side of the device.
- Connect the provided USB Type-C cable to the device and the other end to a standard USB power adapter (not included) or a computer USB port.
- The battery indicator on the display will show charging status. A full charge allows for approximately 8000 measurements.

Figure 4: Type-C USB fast charging port. The 850mAh battery supports long-term use, providing up to 8000 measurements per full charge.
4.2. Powering On/Off
- To Power On: Press the Power button (usually marked with a circle and a vertical line) once.
- To Power Off: Press and hold the Power button for a few seconds, or the device will automatically shut down after 150 seconds of inactivity. The laser will automatically cut off after 20 seconds of inactivity.
5. Operation
The device offers various measurement functions accessible via the buttons on the front panel.

Figure 5: Horizontal screen display with large font for easy reading during measurements.
5.1. Basic Measurement (Single Distance)
- Point the laser at the target.
- Press the READ button (usually red) once to activate the laser.
- Press the READ button again to take the measurement. The result will be displayed on the screen.
5.2. Continuous Measurement
This mode allows for dynamic measurement, displaying the distance as you move the device.
- From standby, press and hold the READ button (or press it twice quickly, depending on model) to enter continuous measurement mode.
- Move the device, and the display will update in real-time. The minimum and maximum values during the continuous measurement session may also be displayed.
- Press the READ button again to exit continuous measurement.
5.3. Area and Volume Measurement
The device can calculate area (length x width) and volume (length x width x height).
- Press the Function button (often marked with a square or multiple squares) until the area or volume icon appears.
- Follow the on-screen prompts to measure the required dimensions (length, width, height) by pressing the READ button for each dimension.
- The calculated area (m²) or volume (m³) will be displayed.
5.4. Pythagorean Measurement
This mode allows indirect measurement of height or distance using the Pythagorean theorem.
- Press the Function button until the Pythagorean icon appears (e.g., a triangle).
- Follow the on-screen prompts to measure the hypotenuse and one leg of the right-angled triangle by pressing the READ button for each measurement.
- The device will calculate and display the unknown side.

Figure 6: Visual representation of various measurement applications: single, continuous, area/volume, and Pythagorean.
5.5. Unit Switching
The device supports measurement units in meters (m), inches (in), and feet (ft).
- To switch units, press the Unit button (often integrated with the Function button or a dedicated button) repeatedly until the desired unit is displayed.
5.6. Reference Point Adjustment
The measurement can be taken from the front or rear of the device.
- Press the Reference Point button (if available, or a combination of function buttons) to toggle between front and rear reference points. An icon on the display will indicate the current reference point.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens gently with a soft cloth, similar to cleaning camera lenses.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures (-20℃ to 60℃).
- Battery Care: If the device will not be used for an extended period, charge it periodically to maintain battery health.
- Avoid Impact: Protect the device from drops and strong impacts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery | Charge the device fully. |
| Inaccurate measurements | Obstructed laser path, unstable surface, or extreme environmental conditions. | Ensure clear laser path, measure on stable surfaces, and operate within specified temperature range. Perform self-calibration if available. |
| Laser does not activate | Device in standby mode or low battery. | Press the READ button to activate. Charge the device if battery is low. |
8. Specifications
| Feature | Specification |
|---|---|
| Item | SW-B40 |
| Model | SW-B40 |
| Max. Measuring Range | 40m |
| Laser Color | Red |
| Reference Point | 2 (rear, front) |
| Accuracy | ±(2mm + d*10^-4) |
| Continuous Measure | Yes |
| Area Measure | Yes |
| Volume Measure | Yes |
| Pythagorean Measurement | Full mode |
| Unit Options | m/in/ft |
| Working Temperature | 0℃ ~ 40℃ |
| Storage Temperature | -20℃ ~ 60℃ |
| Storage Humidity | 20% ~ 80% RH |
| Min/Max Value Display | Yes |
| Self-Calibration | Yes |
| Laser Level | II |
| Laser Type | 630-670nm, <1mW |
| Automatically Cut Off Laser | 20s |
| Automatic Shutdown | 150s |
| Battery | 3.7V 850mAh Lithium Battery |
| Buttons/Keys Sound | Yes |
| Product Dimension | 100.3 x 33.4 x 18.3mm |
| Power Type | Battery-Powered |
| Certification | CE |

Figure 7: Device dimensions (Model SW-B60 shown, dimensions are consistent across models).
9. Support and Further Information
For more detailed information or specific troubleshooting not covered in this manual, please refer to the comprehensive user manual available in PDF format.
Download User Manual (PDF): A detailed user manual is available for download at the following link: Product Manual PDF