MANUALS+

Adult content warning

FREDORCH 120W Premium Sex Machine F6PLUS User Manual

Why this warning: This page discusses adult sexual products and may include explicit descriptions or images.

Leave this page

fredorch F6PLUS

Contents

FREDORCH 120W Premium Sex Machine F6PLUS User Manual

1. Product Overview

The FREDORCH F6PLUS is a premium sex machine designed for versatile use. It features a powerful 120W turbo motor, adjustable stroke length and speed, and robust construction with high-quality stainless steel components. This manual provides essential information for the safe and effective setup, operation, and maintenance of your device.

FREDORCH F6PLUS Sex Machine with remote control and attachment
Figure 1: FREDORCH F6PLUS Sex Machine with included accessories.

2. Safety Instructions

  • Ensure the machine is placed on a stable, flat surface before operation.
  • Keep the machine away from water or other liquids to prevent electrical shock.
  • Do not attempt to disassemble or repair the machine yourself. Contact support if issues arise.
  • Unplug the machine from the power source when not in use or before cleaning.
  • Keep out of reach of children.

3. Setup Guide

Follow these steps to assemble your FREDORCH F6PLUS sex machine:

  1. Prepare Parts: Gather all components including the main machine body, T-shaped brackets, solid shaft, short shaft connector, and wrenches.
  2. Install T-shaped Brackets: Lock two T-shaped brackets onto the main frame.
  3. Assemble T-bar: Loosen the handle on the machine, insert the T-bar, adjust its height, and fasten the handle securely. The nut allows adjustment of the tightness of the jaws.
  4. Insert Solid Shaft: Insert the solid shaft into the short shaft connector and tighten it.
  5. Attach Foot Covers: Insert two sets of T-brackets and then remove the foot covers.
  6. Install Second T-bracket: Install the T-bracket on the other side of the machine to complete the base.
  7. Adjust Angle (Optional): The machine can be adjusted 90 degrees for different usage positions. To do this, change the direction of the motor handle (change the handle and black pad at the same time). Remove the other T-bracket and reposition it to complete the base shift.
  8. Install Pull Rod: Install the special strong lock pull rod. Rotate it counterclockwise six times to secure.
  9. Connect Accessories: If using flexible couplings, fit the fitting connector into the connector hole and insert it to the bottom. Buckle the loop for other accessories.
  10. Connect Power: Connect the power supply cable to the power interface on the machine.
  11. Connect Controller: Install the wired control cable into its designated port.
Machine with adjustable stroke length and VAC-U-Lock connector
Figure 2: Stroke length adjustment and VAC-U-Lock attachment point.
Diagram showing short (30cm) and long (50cm) poles for single or dual-sided use
Figure 3: The machine supports both short (30cm) and long (50cm) poles, usable on single or both sides.
Multi-angle display of the machine with various attachments
Figure 4: The machine can be configured with various attachments for multi-angle functionality.

4. Operating Instructions

4.1 Control Versions

Your FREDORCH F6PLUS comes in two control versions:

  • Wired Control: Operates using a wired speed controller.
  • Dual Controls: Operates using both a wireless remote and a wired speed controller.

4.2 Remote Control Operation (Dual Control Version Only)

  1. Install Batteries: Ensure batteries are correctly installed in the remote control.
  2. Normal Mode:
    • Press the ON/OFF button on the remote once. The buzzer will ring twice, and the machine will start at a low speed.
    • Press and hold the speed up or speed down key to accelerate or decelerate. Continuous pressing allows for stepless acceleration/deceleration.
    • Press the ON/OFF button once again to shut down the machine.
  3. Frequency Mode:
    • Caution: Do not attempt frequency conversion during initial testing. The machine will run at full speed in this mode. Ensure the machine and your posture are properly adjusted before entering frequency mode.
    • Press the ON/OFF key to start the machine.
    • Press the frequency key 3 times continuously. On the third press, the machine will enter frequency conversion mode (each press will produce a sound).
    • Each subsequent press of the frequency key will change the frequency (18 different frequencies available).
    • To exit frequency mode, press the stop key directly.

4.3 General Operation

  • Speed Adjustment: The machine offers an infinite speed range from 0 to 5 strokes per second (0-300 times/min). Adjust as desired using the controller.
  • Stroke Length: The stroke length is adjustable from 3 cm to 11.4 cm.
  • Angle Adjustment: The machine's angle can be adjusted from -45 degrees to +90 degrees to suit various positions.
  • Dual Rod Use: The machine supports a dual-head design, allowing for two rods to be used simultaneously (with appropriate accessories).
Machine configured for dual control operation, usable by two people
Figure 5: The machine supports dual control operation, allowing for use by two people simultaneously.

5. Maintenance

  • Lubrication: The machine utilizes a lubricating bearing design. It is recommended to add lubricant to the slide rail every 2-3 months to ensure smooth operation.
  • Cleaning: The machine should not be washed with water. After use, please dry it thoroughly and keep it in a dry place.
  • Storage: Store the machine in a clean, dry environment away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter any issues with your FREDORCH F6PLUS, please consider the following:

  • Machine Not Turning On: Ensure the power cable is securely connected to both the machine and a working power outlet. For remote control versions, check the remote's batteries.
  • Unusual Noises: If you hear unusual noises, ensure all parts are securely fastened and lubricate the slide rail as per maintenance instructions.
  • Inconsistent Operation: Check all cable connections (power, wired controller). For remote control, ensure you are within range and batteries are fresh.

If problems persist, please contact the seller for further assistance. Do not attempt to repair the machine yourself.

7. Specifications

FeatureSpecification
Motor Type120W Turbo Gear Motor, Continuous Duty
Electrical Output24V DC 5A
Power ModePlug-in type
Control MethodWired Controller / Wireless Remote (Dual Control)
Stroke Length3 to 11.4 cm
Speed Range0 to 5 Strokes per second (0-300 times/min)
Torque300N.CM
Angle Adjustable-45 degrees to +90 degrees
Sound Level30 to 38 dB
Shell MaterialAluminum / Metal
CertificationCE
One Rod Machine Size65 x 25 x 45 cm
Two Rod Machine Size85 x 25 x 45 cm
Product size diagram with dimensions in millimeters
Figure 6: Detailed product dimensions (1mm = 0.039in).

8. User Tips

  • Always refer to the included machine manual for detailed instructions. If anything is unclear, contact the seller for assistance or relevant operation videos.
  • Before operating in frequency mode, ensure the machine is stable and all attachments are secure, as it will run at full speed.
  • Regular lubrication of the slide rail is key to maintaining smooth and quiet operation.

9. Warranty and Support

For warranty information, please refer to the terms provided by your retailer or contact the seller directly. Keep your proof of purchase for any warranty claims.

For technical support or inquiries, please contact the seller through your purchase platform.

A detailed user manual in PDF format is available for download: FREDORCH F6PLUS User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.