Universal Power Supply Adjustable AC To DC Power Supply

Contents

Adjustable AC To DC Power Supply User Manual

Model: Adjustable AC To DC Power Supply (Variants: ZY-001, BSK-602)

1. Introduction

This manual provides essential information for the safe and efficient use of your Adjustable AC To DC Power Supply. This device converts standard AC household current into a stable, adjustable DC voltage, suitable for a wide range of electronic devices.

2. Safety Information

Please read and understand all safety instructions before using the power supply. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.

  • Indoor Use Only: Do not expose the power supply to rain, moisture, or extreme temperatures.
  • Ventilation: Ensure adequate ventilation around the power supply during operation. Do not cover it.
  • Power Source: Connect the power supply only to a compatible AC outlet (100-240V, 50/60Hz).
  • Protection Features: This power supply is equipped with intelligent multiple security protections, including:
    • Over Power Protection
    • Over Temperature Protection
    • Overcurrent Protection
    • Short Circuit Protection
    • Overload Protection
    • Flame Retardant Material (housing)
  • Handling: Do not operate the power supply with wet hands. Avoid dropping or subjecting it to strong impacts.
  • Modification: Do not attempt to open, modify, or repair the power supply. Refer all servicing to qualified personnel.
Intelligent multiple security protection icons
Figure 1: Intelligent multiple security protection features.

3. Setup

  1. Unpack: Carefully remove the power supply unit and its accessories from the packaging.
  2. Inspect: Check the power supply and cables for any visible damage. Do not use if damaged.
  3. Select Plug: Ensure you have the correct AC plug type (EU or US) for your region.
  4. Connect AC Power: Plug the AC input cable of the power supply into a standard wall outlet (100-240V AC).
  5. Connect DC Output: Connect the DC output barrel jack (typically 5.5mm outer diameter, 2.1mm or 2.5mm inner diameter) to your target device. Ensure the polarity matches your device's requirements (center positive is common).
Adjustable power adapter with EU and US plugs
Figure 2: Power supply unit with EU and US plug options.

4. Operating Instructions

  1. Power On: Once connected to AC power, the unit with a display will show the current output voltage.
  2. Adjusting Voltage: Use the rotary knob labeled 'VOLTAGE' to adjust the DC output voltage. Turn clockwise to increase voltage and counter-clockwise to decrease it. The LED display will show the real-time output voltage.
  3. Monitoring Output: The integrated LED display provides a clear reading of the current DC output voltage.
  4. Applications: This adjustable power supply is versatile and can be used for various devices requiring DC power, such as routers, monitors, sound systems, electronic organs, LED lamps, motor fan water pumps (for speed regulation), heater heating wires (for temperature regulation), and LED light bars (for dimming).
LED Display Voltage Adjustment and applications
Figure 3: Voltage adjustment knob and display, with example applications.
Power supply connected to various devices
Figure 4: Examples of devices compatible with the power supply.

Video 1: Product demonstration showing connections and voltage adjustment.

5. Maintenance

  • Cleaning: Disconnect the power supply from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the power supply in a cool, dry place away from direct sunlight and moisture.
  • Cable Care: Avoid sharp bends or kinks in the power cables. Do not pull on the cables to disconnect.

6. Troubleshooting

  • No Power/Display:
    • Check if the AC power cable is securely plugged into both the wall outlet and the power supply.
    • Ensure the wall outlet is functional.
  • Incorrect Voltage Output:
    • Adjust the voltage knob to the desired output.
    • Verify the connected device's voltage requirements.
  • Power Supply Shuts Off/Overheating:
    • This may indicate activation of over-temperature, over-current, or short-circuit protection.
    • Disconnect the load and the AC power. Allow the unit to cool down.
    • Check the connected device for short circuits or excessive current draw. Ensure the device's power requirements do not exceed the power supply's maximum output.
    • Ensure adequate ventilation around the power supply.

7. Specifications

FeatureSpecification
Input VoltageAC 100-240V, 50/60Hz
Output VoltageDC 3V-24V (Adjustable)
Output CurrentVaries by model/variant (e.g., 1A, 2A, 3A, 5A)
Output Power≤50W
Rated Capacity40-1000VA
Plug TypeEU / US (depending on variant)
DC Output Connector5.5mm x 2.1mm / 5.5mm x 2.5mm (compatible)
Protection FeaturesOver Power, Over Temperature, Overcurrent, Short Circuit, Overload
Dimensions (approx.)12.6cm x 5.5cm x 3.2cm (for some variants)
Power supply dimensions and specifications diagram
Figure 5: Example specifications and dimensions for a power supply variant.
9-24V 3A power supply variant details
Figure 6: Details for a 9-24V 3A power supply variant (Model: KLY-240300).
3-12V 2A power supply variant with display
Figure 7: Details for a 3-12V 2A power supply variant with display.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or retailer from whom you purchased this product. Please retain your proof of purchase for warranty claims.

Note: A PDF user manual was referenced in the product description, but it appears to be for a Makita battery charger and not this adjustable power supply. Therefore, its content has not been incorporated into this manual.

© 2024 Universal Power Supply. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.