XTOOL IP608

Contents

XTOOL IP608 Smart Diagnostic System User Manual

Your comprehensive guide to automotive diagnostics.

1. General Introduction

The XTOOL IP608 Smart Diagnostic System is an advanced scanning tool based on the Android operating system, designed to provide accurate and comprehensive diagnostic information for vehicles. It supports multiple languages and is suitable for various regions.

Key Features:

  • OE-level All Systems Diagnostics: Diagnose all available systems to pinpoint faults.
  • Built-in CAN-FD Protocol: Compatible with CAN-FD vehicles (e.g., GM 2020+ models) without needing an extra adapter.
  • Auto VIN & Auto Scan: Automatically reads VIN codes and performs quick scans.
  • 8-in-1 Live Data Graph: Monitor car performance with powerful data graphing capabilities, showing up to 8 individual graphs simultaneously.
  • Full OBDII Functions: Comprehensive OBD2 diagnostic modes.
  • 30+ Reset Services: Advanced reset functions for routine maintenance.
  • Multi-language Support: Supports 15 languages including English, Russian, Spanish, Portuguese, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Vietnamese, German, Simplified Chinese, and Traditional Chinese.
  • Lifetime Free Updates: Continuous software updates to support more functions and new models.
  • Broad Vehicle Coverage: Works on over 20,000+ vehicles, including most 12V sedans, SUVs, minivans, and light-duty trucks.
  • Powerful Hardware: Quad Core 1.5GHz CPU, 2G RAM + 32G ROM, 3000mAh battery, Android 10 OS, 5-inch touch screen.
XTOOL Inplus IP608 features overview
Figure 1: XTOOL Inplus IP608 features overview, highlighting CAN-FD support, diagnostic functions, reset services, live data, auto VIN, language support, lifetime updates, and hardware specifications.
Video 1: XTOOL IP608 Product Overview, demonstrating key features like Android 10, 5-inch touch screen, all system scan, 30+ resets, lifetime free updates, full OBD2 functions, 10000+ vehicles, CAN FD, 8 in 1 graphing, Auto Vin & Auto Scan, 2-year warranty, and 24/7 tech support.

2. Safety Precautions

For safe operation and to prevent damage to the device or vehicle, please adhere to the following instructions:

General Safety:

  • Keep the device away from heat or fumes during use.
  • If the vehicle battery contains acid, keep your hands and skin away from the battery during testing.
  • Ensure adequate ventilation as vehicle exhaust gas contains harmful chemicals.
  • Do not touch hot vehicle cooling system components or exhaust manifolds when the engine is running.
  • Ensure the car is securely parked with Neutral or P/N selected to prevent movement during engine start.
  • Verify the Diagnostic Link Connector (DLC) is functioning correctly before testing.
  • Do not switch off power or unplug connectors during testing, as this may damage the ECU or Diagnostic Computer.

Device Handling:

  • Avoid shaking, dropping, or dismantling the scan tool to prevent internal damage.
  • Use only your fingertips to touch the LCD screen; hard or sharp objects may damage it.
  • Do not use excessive force on the device.
  • Avoid exposing the screen to strong sunlight for extended periods.
  • Keep the scan tool away from water and moisture.
  • Store and use the scan tool only within the specified temperature ranges (refer to Technical Specifications).
  • Keep the unit away from strong magnetic fields.

3. Setup

3.1. Connecting Power

The scan tool may require charging before initial use. Use the provided AC/DC charger and USB cable.

  1. Attach the proper power adapter (120 VAC North American or 240 VAC European version) to the AC/DC charger.
  2. Plug the AC/DC charger into a wall outlet.
  3. Plug the USB cable into the AC/DC charger and into the scan tool's USB charging port.

Note: When connected to the OBD port, the device can be automatically charged via the car battery. The scan tool can standby for one day in sleep mode and up to 3 months when powered off. It is recommended to switch off your Scan Tool after use.

3.2. Activation

Upon first power-on, the system will guide you through the activation process:

  1. Language Selection: Select your preferred operating system language (e.g., English). Click 'Next'.
  2. Wi-Fi Connection: Connect to a Wi-Fi network. You will need to enter the Wi-Fi password.
  3. Activation: Follow the on-screen prompts to activate the device. A pop-up window showing "Activation Success" indicates completion. Click 'OK' to enter the diagnostic system.

Note: Activation is highly recommended to receive online software updates. If no network is available, you can click 'Trial' to proceed without activation, but updates will be unavailable.

3.3. Vehicle Connection

To establish communication with the vehicle, follow these steps:

  1. Turn on the XTOOL IP608 tablet.
  2. Connect the vehicle and tablet using the main test cable (DB15 to OBD16).
  3. Switch on the vehicle's ignition (engine off) and tap on the 'Diagnostic' application to begin diagnosis.
Vehicle Connection Diagram
Figure 2: Diagram illustrating the connection of the XTOOL IP608 to a vehicle's OBD-II port using the main test cable.

Note: Ensure all cables are connected tightly. The vehicle's DLC (Diagnostic Link Connector) is not always located under the dash; refer to your vehicle's user manual for its exact location.

4. Operating Instructions: Diagnostic Functions

The diagnostic application allows you to read ECU information, read and clear Diagnostic Trouble Codes (DTCs), and check live data and freeze frame data. It can access the ECU of 5 vehicle control systems: Engine, Transmission, Anti-lock Braking System (ABS), Airbag Safety Restraining System (SRS), and Electronic Parking Brake system (EPB).

4.1. Vehicle Selection

The scan tool offers three methods to select a vehicle for diagnosis:

  • AUTO SCAN: Automatically reads the vehicle's VIN code. Tap "AUTO SCAN" on the diagnosis system entrance. Ensure the car and device are well connected.
  • MANUAL INPUT: Manually enter the 17-character VIN code. Ensure accuracy for correct test results.
  • SELECT VEHICLE BY AREA: Choose a car brand by selecting the appropriate region (Europe, America, Asia, China, Australia) at the top of the screen, then select the specific vehicle model.

Tip: If your model is not recognized by Auto Scan, try manually selecting the vehicle or contacting XTOOL technical support.

4.2. Read ECU Information

This function reads ECU version information, including software and hardware versions, models, production dates, and part numbers. This is useful for maintenance records and ordering parts.

4.3. Read/Clear Trouble Codes (DTCs)

  • Read Trouble Code: Displays current, history, and pending DTCs stored in the ECU. If the device shows "System is OK" or "No Trouble Code", it means there are no related trouble codes or the issues are mechanical.
  • Clear Trouble Code: Clears current and historical trouble codes from the ECU memory. This should only be done after all issues have been resolved. Clearing codes prematurely may erase valuable diagnostic information.

4.4. Read Live Data

Live Data provides real-time information from various sensors, such as oil pressure, temperature, engine speed, and fuel oil temperature. This helps in identifying problems and narrowing down the scope of maintenance.

  • 8-in-1 Graphing: The scan tool supports selecting multiple PIDs (Parameter Identifications) and combining their graphs into one chart for better comparison.
  • Data Recording & Export: You can record current data values as text and export them as CSV files for storage and analysis.
  • Report Printing & Sharing: Diagnostic reports can be generated, printed, or shared.
8-in-1 Real Time Data Stream
Figure 3: Display of 8-in-1 real-time data stream, showing multiple live data graphs and options for data export and recording.

5. Special Functions (Maintenance)

The XTOOL IP608 supports various special reset functions for scheduled services and maintenance. These functions help in resetting codes after resolving common problems.

30+ Advanced Reset Functions
Figure 4: Overview of 30+ advanced reset functions, including EPB, Oil Reset, ABS Bleed, Throttle, BMS Reset, Injector Coding, and SAS.

5.1. ABS Bleeding

This function is used to bleed the brake system to restore ABS braking sensitivity, especially when air is present in the ABS system or after replacing brake components.

  1. Read operating instructions and precautions on the screen carefully.
  2. Attach a bleeder bottle to the left rear bleeder screw.
  3. Open the left rear bleeder screw.
  4. Click "OK" to enter the bleed procedure. Pump the brake pedal continuously with steady applies every 2 seconds.
  5. Continue pumping until air bubbles are no longer visible, then select "OK" for the next wheel.
  6. Repeat for all four wheels (left front, right front, right rear).
  7. Stop pumping the brake pedal and close the bleeder screw.
  8. Click "OK" to complete the bleed procedure.

Caution: The ABS pump screw needs to be unscrewed. Brake fluid will be under pressure; secure the bleed hose and open bleeder screws slowly. Some vehicles may require manual bleeding.

5.2. Oil Reset

Resets the engine oil life system after an oil change, ensuring accurate calculation of the next oil change interval.

  1. Enter the 'Oil Reset' menu and select the relevant vehicle model.
  2. Follow the on-screen instructions, which may include turning on the ignition switch (engine off).
  3. Enter the maintenance mileage reset menu.
  4. Input a reasonable value for remaining oil life and press 'OK'.
  5. Confirm the new value and click 'OK'.
  6. A "Write successfully" message will confirm completion.

5.3. EPB (Electronic Parking Brake) Reset

Resets the electronic parking brake system after repairs or component replacement (calipers, brake discs, pads).

  1. Enter the 'EPB' menu and select the relevant vehicle model.
  2. Follow the on-screen instructions, which may include releasing the handbrake. Press 'YES' to confirm.
  3. Wait for "Successful operation" message, then press 'OK' to exit.

5.4. SAS (Steering Angle Sensor) Adjustment

Calibrates the steering angle sensor, clearing fault memories and turning off the steering wheel warning light.

  1. Enter the 'SAS' menu and select the relevant vehicle model.
  2. Enter the 'Set steering angle sensor' menu.
  3. Follow the on-screen instructions, ensuring the vehicle is parked on level ground and the steering wheel is in the neutral position. Press 'YES' to continue.
  4. Turn the ignition switch ON (do not start the engine). Rotate the steering wheel 10 degrees left and right, then back to the middle position. Press 'OK'.
  5. Turn the ignition switch ON, then turn it off after 3 seconds. Press 'OK'.
  6. A "Function execution is completed" message will confirm completion.

5.5. Throttle Relearn

Resets throttle actuators to default settings, ensuring accurate regulation of throttle operations.

  1. Enter the 'Throttle' menu and select the relevant vehicle model.
  2. Enter the 'Auto Recognition' menu and turn on the ignition switch.
  3. Read and complete the prerequisites (e.g., engine off, accelerator pedal released). Press 'OK'.
  4. Wait for all parameters to be read and displayed.
  5. Press 'F2' and wait for a "Match successfully" message.

5.6. BMS (Battery Management System) Reset

Resets the battery monitoring unit after battery replacement, clearing low battery fault information and protecting the new battery.

  1. Enter the 'BMS Reset' menu and select the relevant vehicle model.
  2. Turn on the ignition switch.
  3. Press 'OK' to continue.
  4. Enter the battery capacity (within the given range) and press 'OK'.
  5. Enter the battery manufacturer and press 'OK'.
  6. Enter the 10-digit battery serial number and press 'OK'.

Other Special Functions:

DPF Regeneration, Airbag Repair, Injector Coding, TPMS Reset, Gearbox Match, Suspension, Window Initialization, Seat Calibration, Headlight, A/F settings, Start/Stop Reset, Language Change, Transport Mode, Tire Upgrade, Power Balance, Electronic Pump Activation, EGR Relearn, A/C Relearn, VGT Relearn, NOX Reset, VIN, Reset control unit, etc.

Note: Special functions may not work on all cars. Always verify compatibility with your specific vehicle make, model, year, and VIN before attempting these functions.

6. Update & Factory Reset

6.1. Software Update

After activating your device, ensure it is connected to the internet to receive software updates. The device will identify and allow you to download all available software packages.

  1. Open the 'Diagnostic' application.
  2. Click 'Updates' to enter the update screen.
  3. Download and install available updates.

Caution: If you change the language configuration, you will need to download all software packages again. If your subscription expires, installed software remains available, but updates will cease. XTOOL is not responsible for restoring software deleted due to personal operation after subscription expiry.

6.2. Factory Reset

Restoring factory settings in the Android OS system will erase all custom settings and data, restarting the device in factory reset mode.

  1. From the main home page, click 'Settings'.
  2. Navigate to 'Backup & reset'.
  3. Follow the on-screen prompts to initiate the factory reset process.

Note: After a factory reset, you will need to select the language again. If software download fails due to network issues, check Wi-Fi connection, connect to another Wi-Fi, then restart the device and try downloading again.

7. Troubleshooting (FAQ)

7.1. Failed to Generate Diagnostic Report

  • Only ECU information, read code, clear code, live data, and freeze frame functions trigger a diagnostic report. Immobilization and maintenance services do not.
  • You must perform at least one diagnostic function after entering the menu.
  • Return to the previous menu step-by-step after completing the diagnostic test. If the app is killed directly, the report cannot be triggered.
  • If issues persist, try exiting the app, clearing the app cache (Android System Setting > Apps > Diagnosis > Clear Cache).

7.2. Failed to Extract Files

The XTOOL tablet runs on Android. For Android, files can be transferred via Bluetooth or USB cable. For iOS, only wired connections are supported.

7.3. Mailbox Supported

The diagnostic tablet supports various mailboxes (Hotmail, Outlook, Yahoo, Gmail). Ensure correct email client configuration. Due to Google's security policy, Gmail accounts may require logging in via the web version or using an app password with two-step verification enabled.

7.4. Remote Support

To make an appointment for remote support, contact your dealer or XTOOL technical support via email (support1@xtooltech.com or support2@xtooltech.com). They will confirm the time for remote assistance.

7.5. Generating and Uploading Diagnostic Log Files

The tablet automatically generates and stores diagnostic logs. When connected to the internet, these logs are automatically uploaded to the backend system.

7.6. Failed to Diagnose Vehicle

  • Confirm vehicle model support with your dealer.
  • Check proper vehicle connection (ignition ON, VCI box status if applicable).
  • Ensure you have entered the correct Diagnostic menu.
  • Use the AUTO-SCAN function to assist in entering the correct menu.
  • Verify software is the latest version; update and retest if necessary.

7.7. Failed to Activate or Register

This is often due to network instability. Switch to a more stable network and try again. If "Registration Failed" occurs, check if outgoing network traffic to non-US regions (like China) is blocked and unblock it.

7.8. Failed to Turn On When Charging

When charging, press the power button to light up the screen (showing charging status), then press and hold for 4-5 seconds until the boot animation appears.

7.9. Failed to Open the Diagnostic App

The tablet requires an internet connection every 30 days. Otherwise, the Diagnostic app will be locked. Reconnect to the network to re-enable it. If issues persist, contact XTOOL technical support.

7.10. Can't Receive Email After Sharing Diagnostic Report

If the device indicates "Sent successfully" but you don't receive the email, your email service provider might be blocking outgoing emails. Whitelist feedback@XTOOLtech.com.

8. Specifications

AttributeValue
Model NameInplus IP608
Brand NameXTOOL
Operating SystemAndroid 10
Memory2G (RAM) + 32G (ROM)
Battery Capacity3000mAh
Communication InterfaceOBD-II, Wi-fi
Wireless SupportWifi
Software UpdateYes (Lifetime Online Free Update)
Hardware Version2026
External Testing CertificationCE
Item Weight1.3kg
Item Dimensions (L x W x H)30cm x 30cm x 8cm
MaterialPlastic
Languages Supported15 Kinds (English, Portuguese, Spanish, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, German, Vietnamese, Russian, Simplified Chinese and Traditional Chinese)
Diagnostic FunctionsOE-level All Systems Diagnostics, Built-in CAN-FD Protocol, Auto VIN & Auto Scan, 8 in 1 Live Data Graph, Full OBDII Functions, Lifetime No Limited Update, 30+ Reset Services Functions
High-concerned chemicalNone

9. User Tips

  • Always Update Software: Regularly check for and install software updates via Wi-Fi to ensure compatibility with the latest vehicle models and diagnostic functions.
  • Verify Vehicle Compatibility: Before performing special functions, always confirm compatibility with your specific vehicle's make, model, year, and VIN to avoid issues.
  • Stable Network for Activation/Updates: Ensure a stable internet connection during initial activation and software updates to prevent errors.
  • Proper Connection: Double-check all cable connections to the vehicle's OBD-II port and the device for secure contact before starting any diagnostic session.
  • Language Authorization: If you need a language other than English, contact XTOOL support with your device's serial number for authorization.

10. Warranty & Support

10.1. Warranty Information

Shenzhen XTOOLtech Intelligent Co., LTD. (the Company) warrants this XTOOL device to the original retail purchaser for TWO (2) YEARS from the date of purchase against defects in material or workmanship under normal usage. Defective parts will be repaired or replaced with new or rebuilt parts at the Company's option, without charge for parts or labor.

This warranty does not cover:

  • Products subjected to abnormal use, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation/repair, or improper storage.
  • Products with removed, altered, or defaced mechanical or electronic serial numbers.
  • Damage from exposure to excessive temperature or extreme environmental conditions.
  • Damage from connection to, or use of any accessory or other product not approved or authorized by the Company.
  • Defects in appearance, cosmetic, decorative, or structural items.
  • Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.

10.2. Remote Assistance

The XTOOL IP608 includes a 'Remote' function to start TeamViewer Quick Support, allowing technical support to remotely access and control your tablet over the internet for assistance.

  1. Turn on the tablet.
  2. Click 'Remote' in the Diagnostic application. The TeamViewer screen will display your device ID.
  3. Provide your ID to the XTOOL technician.
  4. A pop-up will ask for permission to control your device. Click 'Allow' to accept.

10.3. Contact Information

For after-sales service and technical support, please contact:

  • E-Mail: support1@xtooltech.com (for Amazon) | support2@xtooltech.com (for Ali-Express, eBay and others)
  • Tel (China): +86 755 21670995 or +86 755 86267858
  • Official Website: www.xtooltech.com | www2.xtooltech.com

11. Compliance Information

11.1. FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

11.2. Specific Absorption Rate (SAR) Information

This device meets government requirements for exposure to radio waves. The SAR limit for the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the tablet kept 0mm from the body. To maintain compliance, use accessories that maintain a 0mm separation distance and do not contain metallic components.

11.3. ISED Statement (Canada)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

11.4. CE Declaration of Conformity

Shenzhen XTOOLtech Intelligent Co., Ltd declares that this Car Diagnostics Tablet, F500, is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states.

11.5. UKCA Declaration

Shenzhen XTOOLtech Intelligent Co., Ltd declares that this Car Diagnostics Tablet, F500, satisfies all technical regulations applicable to the product within the scope of UK Radio Equipment Regulations (SI 2017/1206), UK Electrical Equipment (Safety) Regulations (SI 2016/1101), and UK Electromagnetic Compatibility Regulations (SI 2016/1091).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.