Subaru Crosstrek DRL & Turn Signal Light User Manual

1. Important Safety Information

Please read all safety warnings and instructions carefully before installation and use.

• Do not modify or disassemble the product's circuitry, as this may cause malfunctions or safety hazards.
• Do not use in damp, high temperature, or flammable/explosive environments.
• Do not adjust the lights during driving to avoid distractions.

2. Product Overview

This product is a Car Front Center Bumper Grille DRL Light designed for Subaru Crosstrek models from 2023 to 2025. It features both white Daytime Running Lights (DRL) and yellow Turn Signal Lamps.

Product Features:

• Provides compliant light penetration to effectively enhance driving safety in adverse weather conditions.
• Durable design with good compatibility with the vehicle's electrical system.
• Low energy consumption and long service life (up to 50,000 hours).
• IP67 Waterproof rating for all road weather conditions.
• Bright LEDs for optimal light output and improved visibility.

Figure 2.1: VGETTING DRL and Turn Signal Light Unit

3. Setup and Installation

3.1 Pre-Installation Check

1. After unboxing, check if all items are complete: 1 set of Daytime Running Lights, 1 wire harness.
2. It is recommended to connect the fog lights to the vehicle's 12V power source for a functional test before installation to ensure proper operation.

3.2 Installation Steps

1. Plan the installation location, typically at the designated area or reserved slot on the vehicle's front bumper.
2. Clean the installation surface thoroughly before mounting to ensure it is free of dust, oil, and moisture, guaranteeing a secure fit.
3. Connect the wiring harness as follows:
   • Yellow wire to Turn Signal positive.
   • Black wire to NEGATIVE (ground).
   • Red wire to ACC (Accessory power, typically switched with ignition).
4. Ensure all wiring harnesses are securely connected and properly fastened, with no risk of loosening.

Figure 3.1: Easy Installation Wiring Diagram

Figure 3.2: Installation Effect (Before and After)

4. Operating Instructions

The DRL and Turn Signal Lights are designed to enhance driving safety and vehicle visibility.

• Daytime Running Lights (DRL): These lights illuminate in white when the vehicle is running, improving forward visibility and making your vehicle more noticeable to other drivers during daylight hours.
• Turn Signal Lamp: When the turn signal is activated, the corresponding light unit will flash in yellow, clearly indicating your intended direction to other road users.

Functional Purpose:

Fog lights are primarily designed to improve forward visibility in low-visibility conditions such as rain, fog, heavy snow, or dust. Do not misuse fog lights in normal weather or well-lit conditions to avoid causing glare to other road users.

Figure 4.1: Lighting Effect (White DRL and Yellow Turn Signal)

5. Maintenance

5.1 Usage Environment

Avoid exposing the lights to extreme temperatures, excessive humidity, or corrosive environments for extended periods. The product is rated IP67 waterproof, providing protection against dust and temporary immersion in water.

Figure 5.1: IP67 Waterproof Feature

5.2 Vehicle Storage

If the vehicle will be parked and unused for an extended period, it is recommended to turn off the power to all added lighting devices to prevent battery drain.

5.3 Cleaning

Clean the light lenses periodically with a soft, damp cloth to remove dirt and debris, ensuring optimal light output.

6. Troubleshooting

6.1 Fog Lights Not Illuminating

• Check if the vehicle's power supply is normal.
• Inspect whether the fog light fuse is blown.
• Verify that the power and wire connections are secure and reliable.

6.2 Abnormal Lighting (e.g., Unstable Brightness)

• Check for loose or oxidized wiring harness connectors.
• Inspect the vehicle's voltage stability.

6.3 Overheating Lens or Condensation Inside

• Stop using immediately.
• Overheating may indicate an electrical issue.
• Condensation may affect sealing.
• Contact a professional for inspection.

6.4 Safety Warning

If abnormal flashing, unusual noise, or odor is detected from the fog lights while driving, turn off the power immediately and conduct an inspection.

7. Specifications

Dimensions:

Figure 7.1: Light Unit Dimensions (in inches)

8. User Tips

• Always ensure your vehicle's battery is disconnected before performing any electrical work to prevent short circuits or damage.
• Double-check all wiring connections for tightness and proper insulation to avoid intermittent issues or electrical faults.
• Regularly inspect the lights for any debris or dirt accumulation, especially after driving in harsh weather, to maintain optimal brightness.

9. Warranty and Support

If you have any questions or require assistance with your product, please contact the store customer service where you purchased the item.

For more detailed information and diagrams, you may refer to the official user manual PDF: View User Manual (PDF)