Introduction
Thank you for choosing the CHAMOUS ABM720 Baby Monitor. This manual provides detailed instructions on how to operate your device and troubleshoot common issues. Please read it carefully before use to ensure proper functionality and safety.
This baby monitor meets all standards related to electromagnetic fields and safe-use when operating in accordance with the instructions of this user guide. Therefore, please read the user guide carefully before using the device.
For a complete PDF version of this manual, please refer to the official document available at User manual (PDF).
Important Safety Warnings
DANGER - Keep the adapter cable away from the baby to avoid a choking hazard from entangling the baby's neck.
Keep the baby camera unit and cable out of the reach of children more than 3 feet or 1 meter away.
Do not place the camera or power supply in a child's cot/crib.
- Keep the baby monitor away from water.
- Keep the baby monitor away from heaters, humidifiers, and other heat/moisture sources.
- Do not use other chargers or power adapters which may damage the device.
- Do not touch the plug with a sharp or metal object.
- Must be assembled by an adult.
- This baby monitor can be used for adult guardianship.
- Store this user guide for future reference.
- Do not cover the baby monitor with a towel or blanket.
Unit Package Contents
The package includes the following items:
- 1 x Camera Unit
- 1 x Displayer (Parent Unit)
- 1 x User Manual
- 2 x USB Cables (Power Adapter + power-charging cable, longer charging cable for camera)
- 1 x Bag of screws
Please use a DC 5V adapter, preferably the original one.

Product Overview
Displayer (Parent Unit) Overview

The displayer features a 5-inch IPS screen and various control buttons:
- Reset Key: For resetting the device.
- Power Switch: To turn the unit on/off.
- Indicator Light: Shows device status.
- Audio Key: Controls audio functions.
- Mic: Microphone for two-way audio.
- Music Key: To play lullabies.
- PTZ/Back Key: Pan/Tilt/Zoom control and back function.
- Direction Keys/Shortcut Keys: Navigation and quick access to features.
- Menu/OK Key: Accesses menu and confirms selections.
- Antenna: For wireless signal transmission.
- Bracket: For standing the unit.
- Speaker: For audio output.
- Power Port: For charging and power supply.
Displayer Status Bar Icons
| Icon | Description |
|---|---|
| 📶 | Signal Level (5 Levels) |
| 🚫📶 | No Signal |
| 📷1 | Camera 1 |
| 📷2 | Camera 2 (customized) |
| 🔍 | Camera Image Zoom In 2 Times |
| 🔄 | Camera Switch |
| 🎶 | Lullaby Turn On/Off |
| 🔊 | Volume Setting (6 levels can be set) |
| 🎤 | Intercom Mode |
| 🌙 | Night Vision Mode |
| 👶🔊 | Crying Detection (HIGH, MED, LOW) |
| 🌡️ | Baby Room Temperature Display |
| ⏰ | System Time |
| 🔋 | Battery Power |
Displayer Menu Icons
| Icon | Description |
|---|---|
| 🍼 | Feeding Reminder Time Setting (Can Set 5 Alarms) |
| 🎵 | Lullaby Selection (8 Lullabies) |
| ⚙️ | System Time Setting |
| 🌡️ | Temperature Setting (°C / °F, Temperature alarm on/off/High/low temperature warning setting) |
| 📹 | Camera Selection (add/delete/switch) |
| 🗣️ | VOX Sound Detection Setting |
| 🔎 | Camera Zoom In/Out |
Camera Unit Overview

The camera unit includes:
- Paring Key: For pairing with the displayer.
- Speaker: For two-way audio output.
- Mic: Microphone for two-way audio input.
- Light Sensor: Detects ambient light for night vision.
- Lens: Captures video feed.
- Infrared Light: Provides illumination for night vision.
- Antenna: For wireless signal transmission.
- Power Port: For power supply.
- Temperature Sensor: Monitors room temperature.
Setup
How to Turn On Device
The camera unit is plug-and-play and does not have a built-in battery; it must be connected to a power adapter to operate. The monitor (displayer) has a built-in rechargeable battery. To turn the displayer on or off, press and hold its power button for 3 seconds.
Pairing the Camera and Displayer
Once both the camera and displayer are turned on, they should auto-connect. If they do not connect automatically, follow these steps:
- Turn on the displayer and press the Menu key.
- Use the Direction keys to select the camera icon (📹) and press OK to confirm.
- In the pop-up menu bar, press the Direction keys to select "Add Camera" and press OK.
- Then, use the Direction keys to choose either Camera 1 or Camera 2 to pair.
- At this point, the blue indicator light of the displayer device will flash, and a prompt will appear on the displayer screen. The blue indicator light stops blinking when the device is paired successfully.
- If no device is paired within 30 seconds, the displayer will automatically exit pairing mode. You can also press and hold the Back key for 1.5 seconds within 30 seconds to exit pairing mode directly.
- When the camera is powered on, press and hold its Pairing key for 3 seconds. The blue light on the camera will flash quickly, indicating it is in pairing mode.
- Once the camera connects with the displayer, its indicator light will turn off, and the displayer will show the camera's image.
Note: One camera can only be connected to one monitor. If pairing fails multiple times, please contact customer support or your local dealer.
Important Notes for Installation
- Fix the camera in a place where the baby can be observed well.
- Place the camera on a flat surface such as a table, desk, or shelf.
- When using, ensure the wireless transmission is smoothly connected between the camera and the displayer. Wireless transmission distance is affected by environmental conditions.
- Heavy metal objects or home appliances (e.g., refrigerators, metal doors, reinforced concrete) can block wireless signals.
- Signal strength may be attenuated by solid structures (e.g., walls), radios, or electrical equipment (e.g., televisions, computers).
- If the signal is lost, try moving the device to a different indoor location.
- Do not place the displayer and camera together within 1.5 meters, as this may cause howling.
Operation
Camera Button Function
Press and hold the pairing button on the camera for 3 seconds to enter pairing mode. It will exit after one minute if not paired, requiring you to pair again.
Night Vision Mode
In a dark environment, the machine automatically switches to night vision mode. The moon icon (🌙) will be displayed in the status bar at the top of the screen. The infrared night vision allows you to see clearly up to 32 feet in total darkness, without disturbing your baby with red lights.

Intercom Mode (Two-Way Audio)
Press the microphone key (🎤) to enter two-way talkback mode. Release the key when the conversation is over. The camera system will remain in intercom mode after releasing the key.

Feeding Reminder (Alarm)
To set a feeding reminder:
- Press the Menu key to enter the main menu.
- Choose the feeding bottle icon (🍼) to select the alarm time (0.5h, 1h, 2h, 3h, 4h).
- Press the Back key to return to the previous step.
If the alarm time is set, the displayer will beep at the selected intervals, and a flashing feeding mark will appear on the screen. Press any key to cancel the feeding reminder.

Temperature Display and Alert
The monitor constantly displays the baby room's temperature. You can set high and low temperature warning thresholds.
To set temperature warnings:
- Enter the main menu and choose the temperature icon (🌡️).
- In the pop-up menu, press OK to confirm.
- Use the Direction keys to set high, low, or turn on/off temperature warnings.
- Press OK to confirm.
- Set the temperature value for warnings:
- High Warning: 28°C ~ 37°C (82°F ~ 98°F). If the ambient temperature exceeds this, a high temperature warning will be issued.
- Low Warning: 0°C ~ 26°C (32°F ~ 78°F). If the ambient temperature falls below this, a low temperature warning will be issued.
The screen will show a temperature status bar. A red mark will appear for high temperature, and a blue mark for low temperature, accompanied by an alarm sound. Press any key to cancel the beep. If the temperature remains outside the set range, the alarm will re-emit after 30 seconds.

Camera Display Selection
To select which camera feed to view (if multiple cameras are paired):
- Enter the main menu and choose the camera icon (📹).
- Press the Menu key to see the sub-menu.
- Choose the desired camera (e.g., Camera 1, Camera 2) to view its image.
- Alternatively, you can choose the cyclic mode to switch between camera feeds every 15 seconds.
VOX Setting (Sound Activation)
VOX (Voice Operated eXchange) detection allows the screen to automatically light up when sound is detected. When VOX mode is on, the display screen will auto light off after 30 seconds. When the ambient volume from the camera is louder than the setup value (e.g., baby crying), the screen will light up, and the speaker will make a sound. This mode is suitable for use at night to save battery.
To adjust VOX settings:
- Press the Menu key to enter the main menu.
- Use the Direction keys to choose the VOX icon (🗣️).
- Press OK to confirm the setting.
There are 3 levels of sound sensitivity to choose from. If VOX mode is turned off, the screen will remain lit without auto on/off, and sound will always be heard from the camera. This is suitable when the baby is playing, and an adult needs to leave for a moment.

Brightness & Volume Adjustment
- To adjust brightness: Press the Brightness key (💡) or Direction keys directly.
- To adjust volume: Press the Volume key (🔊) or Direction keys to increase or decrease volume.
PTZ Remote Control (Pan, Tilt, Zoom)
The camera supports horizontal 355 degrees and vertical 60 degrees rotation, providing all-round monitoring without blind spots.
To control PTZ functions:
- Short press the PTZ key (PTZ/Back) to enter remote control mode.
- Press the Direction keys to adjust the camera's rotation angle (up, down, left, right).
- Press the Zoom In/Out key (🔎) to zoom in or out.

Camera Zoom In
To zoom the camera view:
- Press the Menu key to enter the main menu.
- Choose the zoom icon (🔎).
- Press OK to confirm, then press the Back key to exit the menu.
Maintenance
Cleaning and Care
- Clean the device with a slightly damp cloth or an antistatic wipe.
- Never use detergents or abrasive solvents.
- Do not use thinner, other solvents, or chemicals to clean any part of the product, as this will damage the product and void the warranty.
- Do not expose the product to high temperatures, humidity, or strong sunlight, and do not get it wet.
Troubleshooting (FAQ)
1. Why is the signal in the room bad?
- A: Check if the receiving antenna of the displayer terminal is turned on.
- A: Due to different wall materials in houses, 2.4G signals can be blocked. If the signal is not satisfactory, move the displayer to a different location.
2. Why is there always some noise in the background?
- A: It is impossible to eliminate all noise. This kind of howling is a common issue in the audio field. Please keep the displayer and camera separate by over 1.5 meters.
- Tip: The microphone of the receiver and camera should not face each other. This is a common reason for noise.
3. Why is the temperature not precisely shown on the screen?
- A: There may be differences in indoor air circulation.
- A: The main reason is that the thermistor has a ±1°C deviation, and there may be shielding around the thermistor, leading to a difference in readings.
4. How to eliminate howling?
- A: Please keep your receiver and camera separate by 1.5 meters or more.
- Tip: Ensure the microphone of the receiver and camera are not facing each other.
Specifications
Technical Parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Model | ABM720 | Display Size | 5-Inch IPS |
| Monitor Resolution | 1280*720P | Camera Resolution | 1280*720P |
| Sensor | CMOS 1/4 | Transmission Method | 2.4GHz FHSS |
| View Angle | 75 Degree | Transmission Distance | 300M (Open Space) |
| Battery (Monitor) | 3500 mAh | Battery Working Time | 18 hours (Video streaming) / 31 hours (VOX mode) |
| Temperature Detection | Support | Cry Reminder | Support |
| Monitor Power Consumption | 1.3W | Lullaby | Support (8 Lullabies) |
| Camera Power Consumption | 1W | Feeding Reminder | Support |
| Working Temperature | -20°C ~ 65°C | Night Vision | Support |
| Material | ABS | Monitor Size | 150*74*17mm (L*W*T) |
| Camera Size | D80*105mm (D*T) |

Power Requirements
The power delivered by the charger must be between a minimum of [3] Watts (required by the radio equipment) and a maximum of [5] Watts to achieve the maximum charging speed.
User Tips
Based on general user feedback for baby monitors:
- Optimal Placement: Position the camera high enough to get a good view of the crib but out of reach of the baby, ensuring the power cord is secured away from the crib.
- Signal Strength: If experiencing poor signal, try to minimize obstructions between the camera and monitor, such as thick walls or large electronic devices.
- Battery Life: Utilize VOX mode to extend the monitor's battery life, especially during nighttime use.
- Temperature Accuracy: Be aware that the built-in temperature sensor may have a slight deviation. For critical temperature monitoring, consider using a separate, calibrated room thermometer.
Warranty and Support
For any issues not covered in this manual, or if you experience persistent problems with your device, please contact the seller's customer service or your local dealer for assistance. Damage caused by using non-original chargers or improper cleaning methods may not be covered under warranty.
FCC Declaration
Note: This equipment has been tested and found to comply with the limits for a Class C digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.