ZHURUI EPM5800-E

Contents

ZHURUI EPM5800-E Electrical Parameter Tester User Manual

Model: EPM5800-E

Brand: ZHURUI

1. Introduction

The ZHURUI EPM5800-E is a versatile AC+DC Electrical Parameter Tester designed to accurately measure various electrical parameters for both AC and DC circuits, including the efficiency of LED drivers. This manual provides essential information for the safe and effective use of your EPM5800-E tester.

2. Specifications

2.1. Main Technical Specifications

ParameterValueParameterValue
Meter Power Supply VoltageAC 85V~265VPower Consumption<2W
Operating Frequency45~65HzSampling Rate2 times/second
Display Mode8 pieces of 5.6-inch nixie tubesOverall Dimension128.0mm x 135.0mm x 32.0mm
Temperature and Humidity0~50°C, ≤85% RHInstallation MethodScrew Installation
Accuracy Class0.5%ColorBeige

2.2. AC Measurement Specifications

MeasurementRangeResolutionAccuracy
AC Power0.1W~2500W0.01W [2]0.5% FS
AC VoltageAC 5V~300V0.1V0.5% FS
AC CurrentAC 0.005A~10A0.001A0.5% FS
Power Factor0~1.0000.0010.5% FS
Frequency45.0Hz~65.0Hz0.1Hz0.5% FS

2.3. DC Measurement Specifications

MeasurementRangeResolutionAccuracy
DC Power0.1W~3000W0.01W [2]0.5% FS
DC VoltageDC 1V~300V0.01V0.5% FS
DC CurrentDC 0.005A~10A0.001A0.5% FS

2.4. AC & DC Measurement Specifications (Efficiency)

MeasurementRangeResolutionAccuracy
Efficiency0~100%0.10.5% FS

Notes:

  • [1] This dimension includes the panel; the depth without the panel is 29mm.
  • [2] When the load power is less than 100W, the measurement resolution is 0.01W; when the power is 100W or more, the measurement resolution is 0.1W; and when the power is 1000W or more, the measurement resolution is 1W.

3. Setup Instructions

3.1. Panel Layout

The EPM5800-E features a clear display panel with dedicated windows for AC and DC parameters, as illustrated below:

Diagram showing the panel layout of the EPM5800-E tester with labels for AC Voltage, AC Current, AC Power, AC Power Factor/Frequency, DC Voltage, DC Current, DC Power, and Efficiency.
Figure 1: EPM5800-E Panel Layout

3.2. Wiring Instructions (Viewed from the Back)

Proper wiring is crucial for the safe and accurate operation of the EPM5800-E. Refer to the diagram and instructions below:

Wiring diagram for the EPM5800-E tester, showing connections for AC power supply, AC measurement, DC measurement, and loads.
Figure 2: EPM5800-E Wiring Diagram (Back View)
  1. Meter Power Supply: Terminals 1 and 2 on the left side of the meter's back are for the meter's power supply. Connect these to an AC voltage within the range of AC 85V~265V.
  2. AC Measurement: Terminals 1 and 2 in the middle of the meter are for AC measurement voltage input (AC 5V~300V). Terminals 3 and 4 are AC voltage output terminals, which should be connected to the input end of the driving power supply.
  3. DC Measurement: Terminals 1 and 2 on the right side of the meter are for DC measurement voltage input (DC 1V~300V, terminal 1 is positive and terminal 2 is negative). Terminals 3 and 4 are DC voltage output terminals, which should be connected to the DC load (terminal 3 is positive and terminal 4 is negative).

Caution: The EPM5800-E adopts a bare-board design. After the power is turned on, the board carries high voltage. It is forbidden to touch any part of the circuit board with any part of the body.

3.3. Installation Dimensions

The following diagram illustrates the opening dimensions for embedding the EPM5800-E tester:

Diagram showing the opening dimensions for installing the EPM5800-E tester, with measurements in millimeters.
Figure 3: Opening Dimensions (Unit: mm)

4. Operating Instructions

The EPM5800-E can measure AC/DC parameters and LED driver efficiency. The display is divided into several windows:

  • Left 4 Windows: Display AC parameters (AC Voltage, AC Current, AC Power, AC Power Factor/Frequency).
  • Right 3 Windows: Display DC parameters (DC Voltage, DC Current, DC Power).
  • Bottom Right Window: Displays the driver's efficiency (%).

4.1. Powering On and Initial State

After connecting the meter's power supply as per the setup instructions, power on the meter. Initially, all display windows for AC and DC parameters will show '0.0' or '0.000' as no load is connected yet.

4.2. Connecting and Measuring Load

Once the load (e.g., LED driver and LED light) is connected and powered up, the meter will immediately display real-time measurements for AC Voltage, AC Current, AC Power, DC Voltage, DC Current, DC Power, and Efficiency.

Front view of the EPM5800-E tester displaying various AC and DC electrical parameters and efficiency readings.
Figure 4: EPM5800-E Display with Readings

4.3. Switching Power Factor / Frequency Display

To toggle between displaying the AC Power Factor and AC Frequency in the bottom-left window, press the 'PF/FREQ' button located below that display window.

4.4. Operational Demonstration Video

Watch this video for a visual guide on connecting and operating the EPM5800-E tester:

Video 1: Demonstration of EPM5800-E Electrical Parameter Tester in operation, showing connections and live readings.

5. Maintenance

To ensure the longevity and accuracy of your EPM5800-E tester, follow these maintenance guidelines:

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Store the meter in a dry environment, away from high temperatures and excessive humidity.
  • Avoid exposing the meter to corrosive gases or other harmful substances.
  • Do not attempt to open the casing or modify the internal components, as this may void the warranty and pose a safety risk.

6. Troubleshooting

If you encounter issues with your EPM5800-E, refer to the following common problems and solutions:

  • Meter does not light up after power-on: Check whether the power cord for the meter's power supply is properly connected and receiving power.
  • All parameter displays show zero after power-on: The internal fuse may be burned out. A 10A fuse must be used for replacement. Ensure the replacement fuse has the correct rating.
  • Inaccurate readings: Verify all wiring connections are secure and correct according to the wiring diagram. Ensure the meter is operating within its specified temperature and humidity ranges.

7. User Tips

  • Always double-check your wiring before applying power to prevent damage to the meter or connected devices.
  • Due to the bare-board design, exercise extreme caution and avoid touching any part of the circuit board when the device is powered on to prevent electric shock.
  • For detailed information and additional guidance, you can refer to the official user manual PDF: View User Manual (PDF).

8. Warranty and Support

For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase records handy for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.