Unitron Ativo SP UP

Contents

Unitron Ativo SP UP Hearing Aid User Manual

Model: Ativo SP, Ativo UP

Important Safety Information and Warnings

Warning: If you are younger than 18, do not use this device. Consult a doctor, preferably an ear-nose-throat doctor (ENT), as your condition requires specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.

  • Your hearing aids operate between 2.4 GHz–2.48 GHz. When flying, check if flight operator requires devices to be switched into flight mode.
  • Hearing aids are specially programmed for individual hearing loss and must only be used by the intended person. Do not share.
  • Do not modify the hearing aid without approval from Sonova AG.
  • Do not use hearing aids in explosive areas (mines, industrial areas with danger of explosions, oxygen-rich environments, or areas with flammable anesthetics). The device is not ATEX certified.
  • If you experience pain, inflammation, skin irritation, or excessive earwax, consult your hearing care professional or physician.
  • Directional microphone programs reduce background noise; be aware that warning signals or noises from behind (e.g., cars) may be suppressed.
  • This hearing aid is not for children under 36 months. Supervise children and individuals with cognitive impairment. The hearing aid is a small device with small parts; if swallowed, consult a physician immediately due to choking hazard.
  • Battery Warning: Device batteries are hazardous. If swallowed or placed inside any part of the body, whether used or new, they can cause serious injuries. Keep out of reach of children, individuals with cognitive impairment, or pets. If ingestion is suspected, consult a physician immediately.
  • If you experience itching, redness, blisters, swelling, or inflammation around your ears, inform your hearing care professional and contact your physician.
  • Keep wireless hearing aids at least 15 cm (6 inches) away from active implantable medical devices (pacemakers, defibrillators). If interference occurs, discontinue use and contact the implant manufacturer.
  • Use only specified accessories, transducers, and cables to avoid increased electromagnetic emissions or decreased immunity.
  • Avoid strong physical impacts to the ear when wearing a hearing aid with a customized earpiece, as this may cause the earpiece to break and potentially perforate the ear canal or eardrum.
  • Hearing aids should not be fitted with domes/wax protection systems if you have perforated eardrums, inflamed ear canals, or exposed middle ear cavities. Use a custom earpiece instead.
  • In rare cases, an eartip or part may remain in your ear canal. If this happens, consult a physician for safe removal.
  • Remove hearing aids before medical or dental examinations involving X-rays, CT scans, MRI/NMRI scans.
  • Hearing aids and their parts should be kept out of reach of children. If swallowed, consult a physician immediately.

Introduction

Thank you for choosing Unitron hearing aids. Unitron is dedicated to providing a great hearing care experience. Our products offer advanced technology and personalization. This user guide will help you understand and get the best out of your hearing aids. For setup, use, maintenance, or repairs, contact your hearing care professional.

Setup

Parts of Your Hearing Aids

The Unitron Ativo hearing aids come in two main configurations: with an earmold or with a Slim tube.

Diagram of Ativo SP hearing aid parts

Figure: Ativo SP Parts Diagram

  1. Earhook: Your custom-made earmold attaches to your hearing aids using the earhook.
  2. Microphone: Sound enters your hearing aids through the microphones.
  3. Multi-function button: Switches between listening programs, changes volume, and accepts/rejects mobile phone calls.
  4. Battery door (on & off): Closes to turn on, opens fully to turn off or change battery.

Additional Parts (depending on configuration):

  • Tubing: Part of the earmold that attaches it to the earhook.
  • Earmold: Allows sound to pass to the ear and holds the hearing aid in place.
  • Slim tube: Sound travels down the slim tube to the ear canal.
  • Dome: Holds the slim tube in place in your ear canal.
  • Retention piece: Helps prevent the dome and speaker unit from moving out of the ear canal.

Left and Right Hearing Aid Markings

A blue marking indicates the left hearing aid, and a red marking indicates the right hearing aid. These markings are located on the back of the hearing aid.

Changing Batteries

  1. Remove the sticker from the new battery and wait 2 minutes.
  2. Open the battery door.
  3. Place the battery in the battery door with the flat side facing upwards.

Note: If the battery door is difficult to close, ensure the battery is inserted correctly with the flat side facing upwards (marked with a '+' symbol). Incorrect insertion can damage the hearing aid.

Turning On and Off

The battery door acts as the on/off switch.

  • To Turn On: Close the battery door fully. It may take up to 5 seconds for the hearing aid to turn on. You might hear a start-up melody.
  • To Turn Off: Open the battery door.

Putting On Your Hearing Aids

With Classic Earmold:

  1. Take the earmold up to your ear and place the ear canal part into your ear canal.
  2. Place the hearing aid behind your ear.
  3. Insert the upper part of the earmold into the upper part of the bowl of your ear.

With Dome, SlimTip, or Universal Eartip:

  1. Place the hearing aid behind your ear.
  2. Insert the earpiece into your ear canal.
  3. If an anchor is attached to the earpiece, tuck it into the bowl of your ear to secure your hearing aid.

Removing Your Hearing Aids

With Classic Earmold:

  1. Lift the hearing aid above the upper part of your ear.
  2. Grasp the earmold with your fingers and gently remove it.

With Dome, SlimTip, or Universal Eartip:

  • Pull on the bend of the tube and remove the hearing aid from behind the ear.

Note: Avoid gripping the tube to remove the hearing aid.

Operating Your Hearing Aids

Multi-function Button

The multi-function button controls volume and program changes, depending on your hearing aid's programming. If paired with a Bluetooth-enabled phone, a short press accepts an incoming call, and a long press rejects it.

Program Control

Pushing the upper part of the button for longer than 2 seconds cycles through listening programs. Beeps indicate the current program:

  • Program 1 (e.g., quiet): 1 beep
  • Program 2 (e.g., noise): 2 beeps
  • Program 3 (e.g., telephone): 3 beeps
  • Program 4 (e.g., music): 4 beeps

Volume Control

Adjust the volume:

  • Push the upper part of the button to increase volume.
  • Push the lower part of the button to decrease volume.

Volume changes are indicated by beeps:

  • Suggested volume level: 1 beep
  • Turning volume up: short beep
  • Turning volume down: short beep
  • Maximum volume level: 2 beeps
  • Minimum volume level: 2 beeps

Connectivity Overview

Your hearing aids support various connectivity options, including Bluetooth-enabled devices like smartphones, PartnerMic, Remote Control, and TV Connector.

Initial Bluetooth Pairing

  1. On your device (e.g., phone), ensure Bluetooth is enabled and search for devices in the connectivity settings.
  2. Switch on both hearing aids. You have 3 minutes to pair.
  3. Select the hearing aid from the list on your device to pair both hearing aids simultaneously. A beep confirms successful pairing.

Note: Pairing is only necessary once per device. Your hearing aid will automatically connect when switched on, as long as the device is ON and within range. Your hearing aid can connect to up to two devices and pair to up to eight devices.

Phone Calls

Your hearing aid connects directly with Bluetooth-enabled phones for hands-free calls. Your voice is picked up by the hearing aid microphones and transmitted to the phone.

  • Making a Call: Enter the number and press dial. You'll hear the dialing tone through your hearing aid.
  • Accepting a Call: A short press (<2 sec) on the multi-function button or accept directly on your phone.
  • Ending a Call: A long press (>2 sec) on the multi-function button or end directly on your phone.
  • Rejecting a Call: A long press (>2 sec) on the multi-function button or reject directly on your phone.

Flight Mode

Flight mode disables Bluetooth connectivity while maintaining normal hearing aid functionality. This is useful for air travel.

Entering Flight Mode:

  1. Open the battery door.
  2. Hold down the lower part of the multi-function button for 7 seconds while closing the battery door.

Exiting Flight Mode:

  1. Open the battery door.
  2. Close the battery door.

Using the Unitron Remote Plus App

The Unitron Remote Plus app offers customizable control for your hearing aids. It is compatible with phones supporting Bluetooth Low Energy (LE).

For compatibility details and instructions, please refer to the official Unitron website.

Listening in Public Places (Telecoil)

Your hearing aid has a telecoil option to help you hear in public places with loop systems (churches, concert halls, train stations). Look for the telecoil symbol. Contact your hearing care professional for activation.

How to Use Telecoil:

  • Direct access via a long press of the multi-function button (if configured).
  • Access via the Remote Plus app.

Maintenance

Proper care ensures optimal performance and longevity of your hearing aids. These hearing aids are classified as IP68, meaning they are water and dust resistant for daily life situations, but should not be fully submerged in water or exposed to chlorinated water, soap, or other chemicals.

General Care

  • Remove hearing aids before using hair spray or cosmetics.
  • When not in use, leave the battery door open to allow moisture to evaporate. Store in a safe, dry, and clean place.
  • After exposure to water, sweat, or dust, clean and dry the hearing aid.

Cleaning Schedule

  • Daily: Inspect earpiece and tube for earwax/moisture. Clean surfaces with a lint-free cloth. Do not use household detergents or rinse with water.
  • Weekly: Clean earpiece with a soft, damp cloth or special cleaning cloth for hearing aids.
  • Monthly: Inspect hearing tube for color changes, hardening, or cracks. Replace if necessary.

Exchanging the Earpiece or Dome

Check and exchange your earpiece regularly if it looks dirty or if sound quality is reduced. Domes should be exchanged every 3 months.

Removing:

  1. Hold the Slim tube in one hand and the earpiece in the other.
  2. Gently pull off the earpiece.
  3. Clean the Slim tube with a lint-free cloth.

Attaching:

  1. Hold the Slim tube in one hand and the earpiece in the other.
  2. Slide the earpiece over the tip of the Slim tube until it fits perfectly.

Exchanging the Earwax Protection (SlimTip)

  1. Insert the removal side of the exchange tool into the used earwax protector until the shaft touches the rim.
  2. Pull and remove the earwax protector straight out (do not twist).
  3. To insert a new protector, push the insertion side of the tool straight into the SlimTip hole until the outer ring is aligned.
  4. Pull the tool straight out; the new protector will remain in place.

Troubleshooting

IssueCausePossible Remedy
No SoundNot turned onTurn on
Low/dead batteryReplace battery
Poor battery contactConsult hearing care professional
Battery upside downInsert battery plus (+) side up
Not Loud EnoughLow volumeTurn up volume; consult professional if persists
Earmolds not inserted properlyReinsert carefully
Earmolds blocked with earwaxClean earmolds; consult professional
Intermittent SoundLow batteryReplace battery
Dirty battery contactConsult hearing care professional
Two Long BeepsLow batteryReplace battery
WhistlingEarmolds not inserted properlyReinsert carefully
Hand/clothing near earMove hand/clothing away from ear
Poorly fitting earmoldsConsult hearing care professional
Not Clear/DistortedPoorly fitting earmoldsConsult hearing care professional
Earmolds blocked with earwaxClean earmolds; consult professional
Earmolds Falling OutPoorly fitting earmoldsConsult hearing care professional
Earmolds not inserted properlyReinsert carefully
Weak on TelephoneTelephone not positioned properlyMove telephone receiver around ear for clearer signal
Mobile Phone Calls Not HeardHearing aids in flight modeExit flight mode
Hearing aids not pairedPair your hearing aids to your mobile phone

For any problems not listed, contact your hearing care professional.

Specifications

Product Overview

Unitron Ativo UP/SP Hearing Aids with App

Unitron Ativo UP/SP Hearing Aids with Mobile App Control.

Unitron Ativo UP and SP models

Comparison of Unitron Ativo UP (larger) and SP (smaller) models.

FeatureDescription
Brand Nametindodo (Unitron)
Model NumberAtivo
OriginChina Mainland
StyleBehind-The-Ear (BTE)
BluetoothYes
Control MethodMobile App-Controlled, Multi-function button
Noise ReductionYes
Feedback CancellationYes
MicrophoneDirectional

Battery Information

ModelBattery SizeColor Marking on PackageIEC CodeANSI Code
Unitron Ativo BTE-UP675bluePR447003ZD
Unitron Ativo BTE-SP13orangePR487000ZD
Unitron Ativo BTE-M312brownPR417002ZD

Fitting Guides (Audiogram Charts)

Ativo SP Fitting Guide Audiogram

Ativo SP Fitting Guide: Shows typical fitting range for Ativo SP model.

Ativo UP Fitting Guide Audiogram

Ativo UP Fitting Guide: Shows typical fitting range for Ativo UP model.

Sound Performance Features (Unitron Ativo UP)

Unitron Ativo UP Specifications Table

Table: Unitron Ativo UP Sound Performance Features

  • Sound Stabilization: Anti Shock 2, Feedback manager.
  • Ease and Convenience: Remote Plus app, TV Connector, Remote Control, PartnerMic, DuoLink.
  • Microphone Options: Adaptive directional, Fixed directional, Fixed wide directional, Omni directional.
  • Fitting: Automatic Adaptation Manager, Frequency compression 2, IntelliVent.
  • Experience Tech Tools: First Fit, Ratings, Coach, Remote Adjust, Success Check.
  • Personalization: Equalizer.

Unitron Ativo UP is rated IP 68.

Environmental Conditions

ConditionOperatingTransportStorage
Temperature+5 to +40 °C (+41 to +104 °F)-20 to +60 °C (-4 to +140 °F)-20 to +60 °C (-4 to +140 °F)
Humidity (non-condensing)0% to 85%0% to 93%0% to 93%
Atmospheric pressure500 to 1060 hPa500 to 1060 hPa500 to 1060 hPa

Product Dimensions and Weight

  • Length: 15 cm
  • Width: 10 cm
  • Height: 5 cm
  • Weight: 0.362 kg

User Tips

  • Self-Programming: While the hearing aids are computer programmable, self-programming requires specific software and equipment. It is generally recommended to have adjustments made by a hearing care professional to ensure optimal performance tailored to your audiogram.
  • Earpieces and Tubes: The hearing aids typically come with earpieces (domes/earmolds) and tubes. Ensure you select the correct size and type for your comfort and hearing needs.
  • Audiogram Customization: For best results, provide your most recent hearing test/audiogram to the seller or your hearing care professional for pre-shipping customization.

Warranty and Support

Local Warranty

Please inquire about the terms of the local warranty with the hearing care professional from whom you purchased your hearing aids.

International Warranty

Sonova AG offers a one-year limited international warranty from the date of purchase. This covers manufacturing and material defects in the hearing aid itself, but not accessories like tubes, wires, or earpieces. Proof of purchase is required for warranty claims.

Warranty Limitations

The warranty does not cover damage from improper handling, care, chemical exposure, or undue stress. Damage caused by third parties or non-authorized service centers voids the warranty. Services performed by a hearing care professional are not included.

Support

For any issues or questions not covered in this manual, please contact your hearing care professional or the manufacturer's representative.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.