1. Introduction
This manual provides essential information for the safe installation, use, and maintenance of your Rustic Metal Flower Wall Art. Please read all instructions carefully before proceeding with installation.

Figure 1: Rustic Metal Flower Wall Art Set
2. Important Safety Information
WARNING: Failure to follow these instructions may result in damage to the product or personal injury.
- Read all instructions before use.
- Keep the device and its cord (if any) out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended decorative use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Package Contents
Please check the package to ensure all items are present and undamaged:
- 3 x Rustic Metal Flower Wall Art pieces
- Mounting screws (quantity sufficient for 3 pieces)
4. Setup and Installation
4.1 Unpacking
- Carefully remove all components from the packaging.
- Inspect each piece for any signs of damage. If any item is damaged, do not proceed with installation and contact customer support.
4.2 Choosing a Location
- Select a wall location that is clean, dry, and structurally sound to support the weight of the decor.
- Consider the overall aesthetic and ensure the placement complements your room's design.
- Avoid areas where the art might be frequently bumped or exposed to extreme conditions.
4.3 Mounting Instructions
The wall art is designed for easy installation using the provided screws. Each piece features a hollow design for lightweight mounting.

Figure 2: Product Dimensions and Mounting Hardware
- Hold each wall art piece against the desired wall location and mark the position for the mounting hole(s) with a pencil. Ensure the art is level.
- Using an appropriate drill bit for your wall type (e.g., plaster, drywall, concrete), drill pilot holes at the marked positions.
- Insert wall anchors if necessary for your wall type to ensure secure mounting.
- Align the wall art piece with the drilled holes and insert the provided screws.
- Tighten the screws until the art piece is firmly secured to the wall, but do not overtighten.
- Repeat for the remaining two pieces, ensuring desired spacing and arrangement.
5. Operating (Placement & Aesthetic)
As a decorative item, the "operation" of this wall art involves its placement and how it enhances your living space.
- Arrangement: Experiment with different layouts (e.g., in a line, staggered, triangular) to find the most appealing configuration for your wall.
- Lighting: Consider how natural and artificial light interacts with the 3D hollow design to create shadows and depth.
- Complementary Decor: Pair the wall art with other rustic, farmhouse, or contemporary decor elements to create a cohesive look.
6. Maintenance
To keep your metal wall art looking its best:
- Cleaning: Gently wipe the surface with a soft, dry cloth to remove dust. For more stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Water Resistance: The product is water-resistant, making it suitable for various indoor environments. However, avoid prolonged exposure to excessive moisture or direct water spray.
7. Troubleshooting
- Art Piece Feels Loose: If an art piece feels loose on the wall, carefully re-tighten the mounting screws. Do not overtighten. If the hole in the wall has become too large, consider using a larger wall anchor.
- Damage During Installation: If a piece is accidentally bent or damaged during installation, attempt to gently reshape it if possible. For significant damage, consider replacement.
- Scratches on Wall: Ensure the back of the art piece is clean before mounting to prevent scratching the wall surface.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Wall Decoration Model A Light Color |
| Model | Model A Light Color |
| Material | Iron |
| Dimensions (each piece) | Approx. 35 cm (13.7 inches) Height x 15 cm (6 inches) Width x 1 cm Depth |
| Quantity per Set | 3 pieces |
| Design Features | 3D Effect Hollow design, Water Resistant |
9. User Tips
- Creative Grouping: While designed as a set of three, consider how these pieces might complement other wall decor you already own.
- Outdoor Use (Limited): Due to its water-resistant nature, it might be suitable for covered outdoor areas like patios, but prolonged direct exposure to harsh weather is not recommended to preserve its finish.
- Shadow Play: Position the art near a light source to enhance the 3D effect and create interesting shadows on your wall.
10. Warranty and Support
For any questions, support, or warranty inquiries, please contact the manufacturer or importer directly.
Manufacturer Information:
Nanjing Jinshi Electronic Trading Co., Ltd
No. 240 Yangxin Road, Dachang Street, Jiangbei New District,
Nanjing City, Jiangsu Province, China
Email: 1045056006@qq.com
EU Authorized Representative:
PI NETWORK SARL
38 rue Dunois 75647 Paris CEDEX 13,75013,FR
Email: friedlichrichter@outlook.com