1. Product Overview
The XHP70 LED Flashlight is a versatile and robust lighting tool designed for various outdoor activities, including diving, camping, cave exploration, and hunting. It features a powerful XHP70 LED, IPX8 professional waterproofing, a magnetic control switch, and convenient Type-C USB charging.

Figure 1: XHP70 LED Flashlight with included accessories and usage scenarios.
Product Components

Figure 2: Detailed view of flashlight components including battery jar, Type-C charging port, magnetic switch, XHP70 LED, and flat mirror.
- Battery Jar: Houses the 18650 battery.
- Type-C Charging Port: Integrated into the battery compartment for direct charging.
- Push Magnetic Control Switch: For easy operation and mode selection.
- Lamp Holder: Secures the LED and reflector.
- XHP70 LED: High-power light source.
- Flat Mirror: Reflector for focused beam.
- Tail Rope: For secure handling and to prevent loss.
2. Setup and Charging
Battery Installation
- Unscrew the tail cap of the flashlight to access the battery compartment.
- Insert one 18650 battery (not included) into the battery jar, ensuring correct polarity (positive end towards the lamp head).
- Screw the tail cap back on securely.
Initial Charging
Before first use, ensure the battery is fully charged.
- Remove the 18650 battery from the flashlight.
- Locate the Type-C charging port on the battery itself.
- Connect the provided Type-C USB charging cable to the battery's charging port and plug the other end into a suitable USB power adapter (e.g., wall charger, computer USB port).
- The LED indicator light on the battery will show red while charging.
- The indicator light will turn green when the battery is fully charged.
- Disconnect the charging cable once fully charged. Do not overcharge.

Figure 3: The 18650 battery features an integrated Type-C USB charging port for convenient charging.
Attaching the Tail Rope
Attach the provided tail rope to the designated loop on the flashlight's tail cap. This helps prevent accidental drops and loss, especially during underwater activities.
3. Operating Instructions
Power On/Off and Mode Selection
The flashlight is operated using the forward-push magnetic control switch located on the body.
- To Turn On: Push the magnetic switch forward. The flashlight will activate in white strong light mode.
- To Turn Off: Push the magnetic switch backward to the off position.
Note: This model features a single white strong light mode. For general use and to conserve battery, use only when necessary.
Usage Environments
This flashlight is designed for amphibious use, suitable for both land and underwater environments.

Figure 4: The flashlight is suitable for both land and underwater use, with a professional waterproof rating.
Safety Precautions During Operation
- Eye Safety: Do not illuminate the eyes directly with the flashlight beam to avoid injury.
- Voltage: Do not use over-voltage. The voltage should not exceed 4.2V. Do not reverse the battery, as this will burn the circuit board.
4. Maintenance
- Battery Care: When the flashlight's brightness significantly diminishes, turn it off and charge the battery promptly to prevent over-discharge. Pay attention to the battery's waterproof, moisture-proof, and anti-drop properties.
- Long-Term Storage: For extended storage, fully charge the battery, then store it. Recharge and discharge the battery once every three months to prevent chemical corrosion and maintain battery health.
- Cleaning: Keep the inner wall of the lamp cup clean. Never wipe it with your hand or a hard object. To clean the lens, gently wipe it with a cotton swab and lens cleaner to remove fingerprints or smudges.
- Environmental Exposure: Avoid prolonged exposure of the flashlight to direct sunlight, water, harsh chemicals, or corrosive gases, as this can cause damage.
- Disassembly: Do not attempt to disassemble the flashlight if you are not a professional, as this may damage the internal circuit board and void any implied support.
5. Troubleshooting
Common Problems and Solutions
- Problem: The flashlight does not turn on, or the light flashes when the switch is pressed.
- Solution: This typically indicates a low battery. The voltage may be insufficient to power the driver board. Charge the battery fully before attempting to use the flashlight again.
- Problem: Light output becomes weaker over time.
- Solution: If your flashlight has a low-power reminder function and the display power is insufficient, charge it immediately to prevent over-discharge. If there is no low-power reminder, charge the battery as soon as the light output noticeably weakens to prevent complete battery exhaustion.
6. Specifications
| Feature | Specification |
|---|---|
| Light Source | XHP70 LED |
| Material | Aluminum Alloy |
| Switch Type | Push Magnetic Control Switch |
| Battery Type | 1 x 18650 (not included) |
| Charging Method | Type-C USB Charging (integrated into battery) |
| Light Modes | 1 (White Strong Light) |
| Zoom Mode | Fixed Focus |
| Waterproof Rating | IPX8 (up to 10 meters underwater) |
| Lumen Output | 2000LM |
| Lighting Distance | > 500 meters |
| Wattage | 5W |
| Certification | CE |
| Dimensions (Approx.) | Length: 17cm (6.69in), Head Diameter: 3.5cm (1.38in), Tail Diameter: 4.2cm (1.65in) |

Figure 5: Approximate dimensions of the XHP70 LED Flashlight.
7. User Tips
- Always carry a spare fully charged 18650 battery for extended use, especially during long trips or dives.
- Before any underwater activity, perform a quick check of the flashlight's seals and ensure the tail cap is securely tightened to maintain its waterproof integrity.
- After diving in saltwater, rinse the flashlight with fresh water and dry it thoroughly to prevent corrosion.
8. Product Demonstration Video
Video 1: Product demonstration showcasing features like the magnetic switch, anti-loss rope, Type-C charging, and waterproof capabilities.
9. Warranty and Support
This product is designed for durability and performance. If you encounter any questions or issues regarding the product, please contact your seller or customer support. We are committed to responding in a timely manner to assist you.