LBW F93S Wireless Motorcycle CarPlay Android Auto System

1. Product Overview

The LBW F93S is a 5, 6, or 7-inch wireless motorcycle CarPlay and Android Auto compatible system designed for universal use across various motorcycle models. It features a wide-angle camera system that records real-time driving videos and photos from both the front and rear of your motorcycle. This all-in-one device allows seamless connection to your mobile phone for navigation, music playback, and communication. Its robust, rain-proof shell ensures reliable performance in wet conditions and during water crossings.

Key Features:

• Wireless CarPlay & Android Auto compatibility
• IP69K Waterproof design
• 7-inch QLED High-Definition Screen (1024*600)
• 1000-nit brightness with adaptive light sensor
• Front and rear dual-channel camera recording (1080P AHD)
• GPS navigation and positioning function
• Bluetooth 5.2 for stable audio and call connections
• Supports TPMS (Tire Pressure Monitoring System) with optional sensors
• High temperature resistance up to 158°F (70°C) and extreme cold resistance down to -4°F (-20°C)
• 60Hz Smooth Refresh Rate

Control Button Functions:

2. Package Contents

The following items are included in your product package:

3. Product Specifications

4. Setup Instructions

4.1. SD Card Installation

The quality of the SD card significantly impacts video recording stability. For reliable video recording, use a Class 10 U1 or higher SD card from a reputable brand (e.g., SanDisk, Kingston, Toshiba, Samsung). The maximum supported capacity is 256GB.

1. Remove the TF card cover.
2. Insert the SD card into the machine, ensuring correct orientation.
3. Reinstall the TF card cover.
4. Secure the cover by locking the 3 screws.
5. Upon first insertion, format the SD card via the device settings to ensure sufficient capacity and proper function.

4.2. Bracket Installation

1. Install the magnetic quick-release bracket head onto the corresponding position of the host unit.
2. Using an open-end wrench, remove the two nuts from the bracket.
3. Install the bracket lower cover onto the motorcycle handlebar.
4. Install the bracket upper cover and then tighten the nuts to secure it.

4.3. Digital Remote Control Installation

Install the remote control on the motorcycle handlebar and tighten the knob. Refer to the diagram for proper placement.

4.4. Step-down Line Wiring Instructions

Connect the yellow wire (B+) and black wire (ground) of the step-down line to the corresponding wiring positions on your motorcycle. Ensure secure connections.

4.5. Overall Wiring Instructions

Connect all components as follows:

1. Connect the host to the four BMW head lines.
2. Plug the front and rear cameras into their respective BMW connectors and tighten them. (Note: Cables are marked DVR-F/DVR-R).
3. Connect the remote control to its BMW connector and tighten it. (Note: Cable is marked GPS/Key).
4. Connect the step-down line to its BMW connector and tighten it. (Note: Cable is marked Power).

Note: For motorcycle wiring, ensure the device corresponds to the A key ACC/ground interface and use the original step-down line.

4.6. Tire Pressure Monitoring System (TPMS) Installation (Optional)

If you have purchased the optional TPMS sensors, follow these steps:

1. Sensor Installation:
   1. Remove the nut cap from the tire valve.
   2. Clean the tire valve.
   3. Fix the bolt.
   4. Fix the sensor tightly according to the position mark.
   5. Lock the sensor with the nut wrench.
   6. Test for tire leakage with soapy water.
2. Tire Pressure Pairing:
   1. From the main interface, click the TPMS icon to enter the tire pressure pairing interface.
   2. Click "FRO" (Front) or "BAC" (Back). The corresponding text will flash.
   3. Click "Start matching".
   4. Install the tire pressure sensors respectively.
   5. Wait for approximately 10 seconds. A "Tire Pressure Binding Successful" message will pop up on the screen.

Remark:

• The sensor battery is a CR1632 button battery, which is replaceable.
• After replacing the sensor battery, re-matching with the receiving host is not required.

4.7. Front and Back Recording Camera Installation

Install the front and rear cameras on the head and tail of the motorcycle, respectively, and secure them firmly.

5. Operating Instructions

5.1. Interface Description

The main interface provides quick access to various functions and displays essential information:

1. Driving recorder: Click to enter the recording interface.
2. Playback: Click to view recorded videos.
3. Mobile phone interconnection: Connect various mobile phones and car charger screen projection.
4. Brightness: Adjust screen brightness.
5. Settings: Access system settings.
6. Direction indication: Displays current driving direction.
7. Status bar: Shows recording status, Bluetooth, WIFI, TF card, GPS.
8. Speed: Displays real-time speed.
9. Date: Displays the current date.
10. Tire pressure: Displays current tire pressure status (if TPMS is installed).

5.2. Apple CarPlay Connection

To connect your iPhone via Apple CarPlay:

1. On the device, click the 'Mobile phone interconnection' button and select the 'CarPlay' option.
2. On your iPhone, turn on Wi-Fi and Bluetooth.
3. The device's Bluetooth (named F600-XXX X) will automatically turn on. Pair your iPhone with this Bluetooth device.
4. Once the Bluetooth connection is successful, Apple CarPlay will connect automatically.
5. Click the 'BT Manage' button to view Bluetooth status.

Note: The Apple CarPlay option only supports Apple phones. If the device is powered on, it will attempt to automatically connect to the last connected phone. To disconnect, turn off the Bluetooth button first, then turn off the Wi-Fi button in your phone settings.

5.3. Android Auto Connection

To connect your Android phone via Android Auto:

1. On the device, click the 'Mobile phone interconnection' button and select the 'Android Auto' option.
2. On your Android phone, turn on Wi-Fi and Bluetooth.
3. The device's Bluetooth will automatically turn on. Pair your Android phone with the device (named F600-XXX X).
4. Once the Bluetooth connection is successful, Android Auto will connect automatically.
5. Click the 'BT Manage' button to view Bluetooth status.

Note: The wireless Android Auto option only supports Android phones. If the device is powered on, it will attempt to automatically connect to the last connected phone. To disconnect, forget Bluetooth in your phone settings and turn off the Wi-Fi button.

5.4. WiFi Video Connection

To connect for WiFi video functionality:

1. Scan the QR code displayed on the device screen to download the corresponding application to your mobile phone.
2. Follow the app prompts to connect to the device's local Wi-Fi. The Wi-Fi name will be CVR-XXX X (e.g., CVR_5B116B1C) and the password will be 12345678.
3. After connecting, the device will enter the recording screen. You can then watch or download recorded videos, set machine parameters, etc., on your mobile phone.

Note: To disconnect, turn off the Wi-Fi button on your phone. You can operate on the machine one minute after being disconnected.

5.5. Driving Recorder

When a card is inserted, the system automatically enters recording mode. The red dot on the button will flash during recording.

5.6. Video Playback

From the main interface, click the 'Playback' button to enter the video playback interface. You can then select a file to play.

5.7. Settings

From the main interface, click the 'Settings' button to enter the settings interface. Here you can configure various aspects of your device:

6. Maintenance

• SD Card Care: Regularly format your SD card (at least once a month) to maintain optimal recording performance and prevent data corruption. Always use a high-quality, Class 10 U1 or higher SD card.
• Cleaning: Use a soft, damp cloth to clean the screen and device body. Avoid abrasive cleaners or solvents that could damage the unit.
• Temperature: While the device is designed for extreme temperatures, prolonged exposure to direct sunlight or excessive heat when not in use can affect its lifespan. Store in a cool, dry place when possible.
• Firmware Updates: Check the manufacturer's website periodically for firmware updates to ensure your device has the latest features and bug fixes.

7. Troubleshooting (Frequently Asked Questions)

8. User Tips

• Magnetic Mount: The upgraded four-contact magnetic mount allows for quick installation and removal. This can be useful for security, as you can easily detach the unit when leaving your motorcycle unattended.
• Car Use: The magnetic mount uses a universal size interface, making it compatible with most car suction cup mounts. This allows you to easily switch the unit between your motorcycle and car for dual functionality.
• Power Options: The device comes standard with an ACC power cord. Firmware has been upgraded to support USB power. If you prefer USB power, ensure you acquire the appropriate USB power cable.
• Display Visibility: The QLED screen with 1000-nit brightness and anti-glare technology is designed for clear visibility in various lighting conditions. Utilize the adaptive brightness adjustment feature for optimal viewing day or night.
• Voice Control: Take advantage of Siri and Google Voice Control for hands-free operation of navigation, calls, and music, enhancing safety while riding.

9. Warranty & Support

LBW offers a 12-month warranty for worry-free use of your product. This warranty covers high-quality parts and stable quality control. For any pre-sales consultation, installation guidance, or after-sales maintenance, please contact LBW Official Store customer support. Our professional engineering team is ready to assist you with any questions regarding installation or usage.

For further assistance, please refer to the official LBW support channels.