ICYYGO IC-220V

Contents

ICYYGO 220V Driverless LED Light Board User Manual

Model: IC-220V

1. Warning and Safety Information

  • Note: Must be used under direct adult supervision.
  • Self-disassembly is prohibited: Unauthorized personnel are not allowed to attempt self-repair.
  • Do not use this product in humid or high temperature environments.
  • Avoid direct eye exposure to the beam.
  • Be sure to cut off the power supply before installation to prevent electric shock.

2. Product Introduction

The ICYYGO LED Light Board is a high-power LED lamp bead chip designed for various lighting scenarios. It features high brightness, low energy consumption, and a long lifespan. This product is driverless, simplifying installation and integration into existing fixtures.

ICYYGO 220V Driverless LED Light Board, 5W-15W, 6000K 3000K 4000K
Overview of the 220V Driverless LED Light Board, highlighting its wattage range and color temperature options.

3. Installation and Usage Instructions

  1. Preparation: First ensure that the power supply voltage meets the product specifications (220V).
  2. Installation work: Make sure the connected power supply is disconnected before handling.
  3. Fixed position: Install the LED lamp beads firmly in the appropriate position.
  4. Use with power: It can be used normally when connected to the power supply.
Close-up of LED Light Board showing integrated drive components
Detailed view of the LED light board, illustrating the integrated drive light source components for driverless operation.

4. Precautions for Use

  • Avoid use in humid or high-vibration environments.
  • Please do not operate in high temperature environment for a long time.
  • Avoid frequent switching to extend the service life of the product.
  • Unauthorized disassembly is prohibited and the product must not be disassembled.

5. Product Features

  • High light intensity and wide irradiation range.
  • Energy saving, environmental protection and long life.
  • Easy to install and compatible with a variety of lighting fixtures.
LED Light Board color temperatures: 6000K White Light, 3000K Warm White, 4000K Natural White
Visual representation of the available color temperatures: White Light (6000K), Warm White (3000K), and Natural White (4000K).

6. Specifications

Attribute Value
Brand Name ICYYGO
Model Number IC-220V
Input Voltage 220V Driver-Free
Shape Round
Certification CCC
Origin Mainland China
Watts & Diameter 5W-44MM, 6W-60MM, 6W-82MM, 10W-82MM, 12W-108MM, 12W-136MM, 15W-162MM
Color Temperature White Light-6000K, Warm White-3000K, Natural White-4000K
Chip Size 2838
Assortment of ICYYGO LED Light Boards in various sizes
An array of ICYYGO LED Light Boards, demonstrating the range of available sizes and wattages.

7. Troubleshooting (FAQs)

Fault Phenomenon Possible Causes Solutions
Light does not light up/flashes The power is not connected or the contact is poor Check the power supply and connecting cable
Overheating Poor heat dissipation Improve the ventilation conditions of the installation location
Uneven illumination Improper angle of lamp beads Adjust the angle or replace accessories

8. User Tips

  • The LED light boards come with pre-attached connectors, eliminating the need for soldering during installation.
  • Ensure the product is well-packaged upon arrival, indicating careful handling during transit.
  • This product is designed for 220V systems. It is not compatible with 110V power supplies.
  • Dimmability is not explicitly stated for this driverless board. If dimming is required, verify compatibility with a suitable dimming system or driver before purchase.

9. Warranty and Support

  • Warranty period: Within one year, defects caused by non-human factors can be replaced or refunded.
  • Customer support: Please contact through the ICYYGO brand customer service for any assistance.

A detailed user manual is available in PDF format for download here.

10. Production Process

This video demonstrates the manufacturing process of ICYYGO LED light boards, including automated assembly and quality checks.
Automated production line for LED light boards
An automated production line demonstrating the manufacturing process of the LED light boards.
Quality control and assembly of LED light boards
Workers performing quality control and assembly tasks for LED light boards.
Testing and packaging of LED light boards
Final testing and packaging stages of the LED light board production.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.