FEELWORLD F6 Plus V2

Contents

FEELWORLD F6 Plus V2 6-inch DSLR Camera Field Monitor User Manual

Model: F6 Plus V2

Brand: FEELWORLD

1. Safety Information and Cautions

Thank you for purchasing the FEELWORLD F6 Plus V2 6-inch Full HD touch screen monitor. Please read this manual carefully before using the unit to ensure proper operation and to prevent damage.

General Cautions:

  • Please avoid heavy impact and dropping the product onto the ground.
  • The screen of this product is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
  • Keep the product away from heat sources and avoid prolonged exposure to direct sunlight, as the LCD screen may be damaged.
  • To avoid damaging the product, do not attempt to disassemble or repair the unit yourself. There are no user-adjustable components inside.

LCD Screen Maintenance:

To better maintain the LCD screen and protect its cover, please follow these guidelines:

  1. Refrain from using hard objects to hit the screen.
  2. Do not force to wipe the screen.
  3. Do not use chemical solutions to clean the screen.
  4. Do not spray any detergent directly on the screen.
  5. Do not write on the screen directly.
  6. Do not stick anything on the screen.
  7. Simply wipe with a clean, soft cloth and ensure no water is left on the screen.

2. Product Overview

The FEELWORLD F6 Plus V2 is a versatile 6-inch DSLR camera field monitor designed to enhance your filming experience with its intuitive touch screen, advanced monitoring tools, and flexible power options.

Key Features:

  • 6-inch 1920x1080 Full HD IPS screen.
  • Intuitive touch screen menu operation for ease of use.
  • Supports 3D LUT Log to REC.709 conversion and user 3D LUT upload (up to 32 custom LUTs).
  • Equipped with professional auxiliary functions including Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, False Colors, Peaking Filter, Pixel to Pixel, Ratio Marker, Nine Grids, and more.
  • Supports screenshots and image overlay functions.
  • Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F & LP-E6 dual-purpose battery slot.
  • Stereo Earphone output.
  • DC 8V power out to power your DSLR or mirrorless camera.
  • 4K HDMI input and loop-out, allowing simultaneous display and output to other monitors.

Product Demonstration:

Video: Overview and demonstration of the FEELWORLD F6 Plus V2 monitor's features and use cases.

FEELWORLD F6 Plus V2 monitor with touch screen and menu overlay

Image: The FEELWORLD F6 Plus V2 monitor showcasing its touch screen interface and menu options.

3. Setup and Installation

3.1 Physical Description

Front Panel:

Front view of the FEELWORLD F6 Plus V2 monitor showing the screen and touch controls

Image: Front view of the monitor, highlighting the touch screen and top buttons.

Back Panel:

Back view of the FEELWORLD F6 Plus V2 monitor showing battery plate and power inputs

Image: Back view of the monitor, showing the dual-purpose battery plate (NP-F & LP-E6 compatible) and various power inputs.

3.2 Port Instructions

Bottom Ports:

  • SD Card Slot: Used for 3D LUT upload and firmware upgrades.
  • DC IN 12V: DC power input (7~24V). Polarity is positive center.
  • 3.5mm Earphone Port: Stereo earphone output.
  • DC IN 5V (Type-C): This port can be connected to a power bank for local power supply. It is not used for data transmission and cannot provide loop-out power.

Left Side Ports:

  • HDMI IN: HDMI signal input, supports up to 4K@60Hz.
  • HDMI OUT: HDMI signal output, supports up to 4K@60Hz.
  • DC OUT 8V: DC power output interface (barrel connector, 5.5mm outer, 2.1mm inner). Polarity is positive center. Used to power your camera with a separately available DC coupler via adapter (e.g., NP-FW50 for Sony, LP-E6 for Canon, DMW-BLF19 for Panasonic).
4K HDMI input and output ports on the monitor

Image: Close-up of the 4K HDMI input and output ports on the monitor.

3.3 Power Supply Options

  • Battery Plate: The rear cover is equipped with a dual-purpose battery plate compatible with NP-F series (e.g., F970, F960, F950, F930, F770, F750, F730, F570, F550, F530) and LP-E6 series batteries.
  • DC Input: Use the DC IN 12V barrel connector (7~24V) or the Type-C 5V port with a power bank.

3.4 Mount Points

The monitor features three 1/4"-20 thread points (top, bottom, and right side) for easy connection to hot shoe mounts or tripod fixed installations.

FEELWORLD F6 Plus V2 monitor mounted on a camera rig

Image: The monitor mounted on a camera rig, demonstrating its versatility.

3.5 Sunshade Assembly

To install the sunshade:

  1. First, securely attach the sunshade frame to the monitor.
  2. Open the sunshade and align the sticker on its inside with the marked part of the sunshade frame.
  3. Smooth and press the three sides of the sunshade onto the frame to complete the installation.
Package contents of the FEELWORLD F6 Plus V2 monitor, including sunshade and tilt arm

Image: Package contents, showing the sunshade and tilt arm.

4. Operating Instructions

4.1 Button Instructions

  • ⑊/TOUCH Button:
    • Long press to turn the monitor power on/off.
    • Short press to turn the screen touch function on/off.
  • MENU Button/Wheel:
    • Long press to open the main menu.
    • Short press to open the shortcut menu.
    • Rotate the wheel to select a menu item. Press it again to open the corresponding menu function.

4.2 Menu Operation

Touch Screen Operation:

  1. Main Menu: Double-click on the screen to open the main menu (displayed on the left side). Click on a menu item to display its secondary menu. You can directly select or set options. Click anywhere on the touch screen to exit the menu.
  2. Shortcut Menu: When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left or right to select the desired function and click on the corresponding menu box to toggle the function on/off.
  3. Brightness/Volume Adjustment: When the menu is not displayed, on the left half of the screen, you can directly adjust the screen backlight brightness. On the right half of the screen, you can directly adjust the volume.

MENU Wheel Operation:

  1. When the menu is not displayed, directly rotate the MENU knob to adjust the volume or backlight.
  2. Gently press the MENU wheel to open the main menu (on the left side of the screen). Rotate the wheel to select the secondary function menu. After selecting it, press the wheel, then rotate the wheel to select or set the option function.
  3. Long press the MENU wheel to return or exit the menu.

4.3 Screenshot and Image Overlay

The monitor supports screenshot and image overlay functions. The number of screenshots stored depends on the capacity of the SD card. You can also import custom images (must be JPG format, resolution not exceeding 1920x1080).

Monitor showing screenshot and video overlay function

Image: The monitor demonstrating its screenshot and image overlay capabilities.

  1. After turning on the monitor, insert an SD card into the SD card slot and input the signal.
  2. Swipe your finger to the left on the right side of the screen to display the screenshot function menu. Tap any position of the screen to hide the menu.
  3. Click the camera icon to capture the desired image, then click the folder icon to browse all captured images. Use the < or > icons to navigate pages. To delete an image, select it, then click the trash can icon and follow the prompt.
  4. Double-click the image you want to overlay. Click anywhere on the screen to display icons for adjusting transparency (1-10) and turning off the overlay function. Click the 'X' icon to close the overlay function.

4.4 Menu Function Instructions

The monitor offers a wide range of professional auxiliary tools. Here's a summary of key functions:

Professional auxiliary tools displayed on the monitor (Vectorscope, Histogram, YUV Parade, Y Parade)

Image: Monitor displaying various professional auxiliary tools like Vectorscope and Histogram.

  • Assist: Toggle various assist functions on/off.
  • Waveform: Displays overall brightness, checks evenness of lighting. Modes: RGB, YUV, Y. Position X/Y adjustable (0-100). Waves Trans.: Off, 25%, 50%, 75%.
  • Vector: Shows image saturation and pixel distribution on the color spectrum. Position X/Y adjustable (0-100).
  • Histogram: Graphic display of color tone distribution and exposure status. Modes: RGB1, RGB2, Y. Position X/Y adjustable (0-100).
  • Focus Assist (Peaking): Highlights in-focus areas. Color: Red, Green, Blue. Peaking Level adjustable (1-10).
  • Zebra Pattern: Highlights areas exceeding a certain threshold with a striped pattern to indicate overexposure. Threshold Value adjustable (10-100).
  • Check Field: Quickly adjusts hue and saturation. Modes: Red, Green, Blue, Mono.
  • False Colors: Displays an image with colors representing different exposure levels. Modes: Normal, ARRI.
  • Grids: Customizable grid overlays (2x2, 3x3, 4x4, 5x5, 6x6, 7x7, 8x8, 9x9, Custom). Rows/Columns 2-9.
  • Safe Frames: Displays safe area guides. Modes: 80%, 85%, 90%, 93%, 96%, 2.35:1, 9:16. Color: Red, Green, Blue, Black, White, Gray.
  • Center Marker: Displays a center crosshair. Color: Red, Green, Blue, Black, White, Gray.
  • Ratio Marker: Displays various aspect ratio markers. Modes: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16, 1:1. Color: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5.
  • Scan Mode: Under Scan, Over Scan.
  • Aspect Ratio: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen.
  • Anamorphic: De-squeezes anamorphic footage. Modes: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X-2.00X).
  • Image Flip: Flips the image horizontally (H Flip), vertically (V Flip), or both (H_V Flip).
  • Zoom Mode: Magnifies a portion of the image. Modes: 2X, 4X, 9X, 16X, User (customizable 100%-200%).
  • Image Freeze: Freezes the current image on screen.
  • P2P (Pixel to Pixel): Displays the image at 1:1 pixel ratio without scaling.
  • User Option (LUT):
    • LUT Switch: On/Off. When on, select LUT (SLOG2, SLOG3, LOGC, VLOG).
    • Lut Import: Confirm.
    • Lut Table: Shows 4 built-in LUTs and up to 32 custom loaded LUTs.
  • HDR: High Dynamic Range display. Modes: HLG1, HLG2, HLG3.
  • Display Adjustment: Backlight (0-100, default 80), Brightness (0-100, default 50), Contrast (0-100, default 50), Saturation (0-100, default 50), Tint (0-100, default 50).
  • Color Adjustment: Display Range (Auto, Limit, Full), Color Temp. (5600K, 6500K, 9300K, User).
  • OSD Option: Adjust menu background transparency, No Signal background color.
  • EDID Settings: 2.0, 1.4 (compatible with different camera/device resolutions). Default to 2.0.
  • Volume: Adjusts speaker volume (0-100).
  • Power Settings: Power on (Auto, Manual).
  • Reset: Resets all settings to original.
  • Firmware: Displays firmware version and allows for firmware update.

4.5 How to Load LUTs

The monitor supports loading custom 3D LUT files via an SD card. The LUT file format suffix must be .cube, and each file should not exceed 7.9MB. The monitor supports LUT-3D-Sizes 17, 32, 33, 64, 65. LUT file names must be in English or Arabic numerals. A maximum of 32 LUT files can be loaded.

SD Card Requirements:

  • Format: FAT32 or NTFS. For MAC systems, format in MS-DOS (FAT).
  • Max Files Limit: Maximum 32 LUT files.

Steps for Loading:

  1. Ensure the SD card is correctly inserted into the monitor.
  2. Navigate to the main menu: User Option > LUT > LUT Import > Confirm. The monitor will automatically detect the SD card.
  3. If no SD Card is detected: The screen will show "failed". Restart the monitor and try again.
  4. If SD Card is present but no valid LUT files: The monitor will erase existing user LUTs and show "Initializing". If no valid LUT file is found, it will show "clean up".
  5. If valid LUT files are found: The monitor will load the LUT files and show "[n] name" (where [n] is the quantity number and "name" is the LUT file name). If successful, the screen will show "complete[n]".

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your FEELWORLD F6 Plus V2 monitor.

  • Screen Cleaning: Always use a clean, soft cloth to wipe the screen. Avoid harsh chemicals, abrasive materials, or excessive pressure. Ensure the screen is dry after cleaning.
  • Battery Care: If the monitor will not be used for a long period, remove the battery to prevent potential damage from leakage or over-discharge.
  • Storage: Store the monitor in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping or subjecting the monitor to strong impacts.

6. Troubleshooting

6.1 Only Black and White or Monochrome Picture:

  1. Check saturation, brightness, and contrast adjustments in the menu.
  2. Verify that the "Monochrome" setting is not enabled in the menu.

6.2 No Image After Power On:

  1. Check if the signal cable connection (HDMI) is secure and in good condition.
  2. Ensure you are using the standard adapter to connect the monitor.
  3. If powered by battery, check if the battery is fully charged.

6.3 Earphone No Sound:

  1. Check if the volume control is enabled and increase the volume.

If problems persist, please contact technical support for assistance. Specifications are subject to change without prior notice due to continuous product improvement.

7. Specifications

Feature Specification
Panel Size 6" touch screen
Resolution 1920 × 1080 pixels
Dot Pitch 0.069 (H) × 0.069 (V) mm
Pixel Density 367PPI
Aspect Ratio 16:9
Brightness 450cd/m²
Contrast 1000:1
Viewing Angle 80°/80°(L/R) 80°/80°(U/D)
Backlight LED
Adjustable Backlight Yes
Input HDMI
Output HDMI, 3.5mm stereo headphone jack
Power In DC IN 12V, Barrel (5.5mm outer, 2.1mm inner), DC IN 5V (Type-C)
Power Out DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera)
HDMI Input/Output Support Format 480i/480p/576i/576p
720p(60/59.94/50/30/29/25/24/23.98)
1080i(60/59.94/50)
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
3840×2160p (60/50/30/29.97/25/24/23.98)
4096×2160p (60/50/30/29.97/25/24/23.98)
Power Input Voltage 7~24V
Power Consumption ≤8W
Unit Size (mm) 148L×93H×20D (mm)
Unit Weight 235g
Mount Points (3) ¼-20 thread points (top, bottom, right sides)
Working Temperature -20°C ~ 50°C
Storage Temperature -30°C ~ 60°C

8. User Tips

  • SD Card for LUTs: When using the screenshot or LUT import function, always use an empty SD card or one that does not contain any firmware upgrade files. Do not remove the SD card during these operations.
  • Battery Usage: For optimal performance and working time, it is recommended to use standard original F970 batteries. Different battery specifications will yield different operating times. If the monitor will not be used for an extended period, remove the battery.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official FEELWORLD website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Please note that product features and specifications are subject to improvement and may change without prior notice.

A detailed user manual in PDF format can be viewed here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.