ludengchaoshi Nordic Modern LED Dining Table Art Pendant Light

Contents

Nordic Modern LED Dining Table Art Pendant Light User Manual

Model: Nordic Modern LED Dining Table Art Pendant Light

Brand: ludengchaoshi

1. Product Overview

The Nordic Modern LED Dining Table Art Pendant Light is a stylish and functional lighting fixture designed for modern interiors. It features an iron body with an acrylic lampshade, providing efficient and adjustable LED illumination. This chandelier is available in 3, 5, and 6-head configurations, offering versatility for various room sizes and lighting needs.

Gold 6-head chandelier installed in a modern kitchen

Figure 1: Nordic Modern LED Dining Table Art Pendant Light (6-head, Gold)

Black 6-head chandelier installed in a modern dining room

Figure 2: Nordic Modern LED Dining Table Art Pendant Light (6-head, Black)

2. Safety Information

  • Always disconnect power at the circuit breaker before installation, cleaning, or maintenance.
  • Installation should be performed by a qualified electrician or a person with sufficient knowledge of electrical wiring.
  • Ensure the mounting surface can support the weight of the fixture.
  • Do not connect the fixture to an ungrounded electrical system.
  • Do not attempt to modify the fixture or its components.
  • Keep packaging materials away from children.

3. Setup and Installation

3.1. Before You Begin

  • Unpack all components carefully and check for any damage.
  • Ensure all parts listed in the accessories section are present.
  • Tools typically required: Screwdriver, wire strippers, electrical tape, ladder.
  • Important: Refer to the original PDF user manual for detailed diagrams and specific wiring configurations for 3, 5, and 6-head models. The following steps are general guidelines.

3.2. Installation Steps

  1. Prepare Lamp Holders: Take the lamp holder with one hole and the bipolar lamp socket. Open the lampshade, then take a washer and a nut. Thread the wire of the bipolar lamp socket through the washer and nut, and connect it to the wire of the single-hole lamp holder. (Refer to Diagram 1 in the PDF manual for visual guidance on line connection ports).
  2. Connect Two-Hole Lamp Holders (for 5 & 6-head models): After completing the first step, take the lamp holder with two holes, connect it to the circuit. (Refer to Diagram 1 in the PDF manual for visual guidance).
  3. Connect Bipolar Lamp Sockets (for 5 & 6-head models): After completing the previous step, take the bipolar lamp socket, connect it to the circuit. (Refer to Diagram 1 in the PDF manual for visual guidance).
  4. Connect Additional Two-Hole Lamp Holders (for 6-head models): After completing the previous step, take another lamp holder with two holes, connect it to the circuit. (Refer to Diagram 1 in the PDF manual for visual guidance).
  5. Connect Unipolar Lamp Socket (for 6-head models): After completing the previous step, take the unipolar lamp socket, connect it to the circuit. (Refer to Diagram 1 in the PDF manual for visual guidance).
  6. Final Assembly and Mounting: Install the pendant and suspension barrel. Adjust the line length to your desired height. Securely mount the fixture to the ceiling junction box according to local electrical codes.
Diagram showing product dimensions and specifications table

Figure 3: Product Dimensions and Basic Information

Image showing 3 Heads Black model with dimensions: 70cm length, 8cm height, 150cm adjustable wire

Figure 4: 3-Head Model Dimensions

4. Operating Instructions

This pendant light is controlled via a remote control, allowing for stepless dimming and color temperature adjustments.

4.1. Remote Control Functions

  • Power On/Off: Press the power button to turn the light on or off.
  • Brightness Adjustment: Use the brightness control buttons (usually '+' and '-') to increase or decrease the light intensity.
  • Color Temperature Adjustment: Use the color temperature buttons to switch between different light colors:
    • White Light (6000K): Bright, cool white light.
    • Neutral Light (4000K): Balanced, natural white light.
    • Warm Light (3000K): Soft, yellowish light.
  • 3-Color Mode: For models with '3-color' functionality, pressing the control switch (or a dedicated button on the remote) will cycle through warm light, white light, and natural light.
Image showing remote control with options for brightness adjustment (bright to dusky) and color temperature adjustment (white light, neutral light, warm light). Text indicates brightness can be adjusted for both monochromatic and trichromatic colors.

Figure 5: Intelligent Stepless Dimming and Color Matching

4.2. Product Demonstration Video

Video 1: Product demonstration showing light dimming and color temperature changes.

5. Maintenance

  • Cleaning: To clean the fixture, ensure the power is off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Bulb Replacement: This fixture uses integrated LED chips. The LED light source is not user-replaceable. If the LEDs fail, the entire fixture may need professional servicing or replacement.
  • General Care: Periodically check all connections and mounting hardware to ensure they are secure.

6. Troubleshooting

  • Light does not turn on:
    • Check if the power supply is connected and the circuit breaker is on.
    • Ensure all wiring connections are secure.
    • Check the remote control battery and ensure it's within range and line of sight.
  • Light flickers:
    • Verify stable power supply.
    • Check for loose wiring connections.
  • Remote control not responding:
    • Replace the remote control battery.
    • Ensure there are no obstructions between the remote and the fixture.
    • Try re-pairing the remote if applicable (refer to specific instructions if provided with the remote).

If you encounter persistent issues, please contact customer support.

7. Specifications

FeatureDescription
Brandludengchaoshi
Item TypeChandeliers
StyleModern Style
Body MaterialIron
Shade MaterialAcrylic
Light SourceLED Chip (Integrated)
Voltage110V / 220V AC
Power SourceAC
Installation TypeSemiflush Mount
Installation MethodSelf-contained
Bulbs IncludedYes
DimmableYes (Stepless Dimming)
Color Temperature3000K (Warm), 4000K (Neutral), 6000K (White)
Switch TypeRemote Control
CertificationsCE, EMC, LVD, ROHS
Adjustable HeightUp to 120cm (cable length)

7.1. Model-Specific Specifications

ModelSize (Diameter/Length)WattageApplicable Space
3 Heads70cm long21W5 - 8 m²
5 Heads120cm long35W8 - 12 m²
6 Heads120cm long42W10 - 15 m²

8. User Tips

  • Material Clarification: The light-emitting part is made of high-quality acrylic, which ensures even light diffusion and durability, providing effective illumination.
  • Optimal Placement: Consider the size of your dining table and room when choosing between 3, 5, or 6 heads to ensure balanced lighting.
  • Remote Control Usage: Keep the remote control in an easily accessible place. Ensure it has fresh batteries for consistent performance.
  • Adjustable Height: Take advantage of the adjustable hanging wire during installation to set the perfect height for your space and preference.

9. Warranty and Support

This product comes with a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.

9.1. Customer Support

If you have any questions, encounter issues with your product, or require technical assistance, please contact customer support:

  • Email: duogui111@outlook.com
  • Platform Support: You can also contact the seller directly through the platform where you purchased the product.

When contacting support, please provide your order number and a detailed description of the issue.

© 2023 ludengchaoshi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.