1. Introduction
Thank you for purchasing the FEELWORLD D101 Plus Dual 10.1-inch Rackmount Monitor. This manual provides detailed instructions for the safe and efficient operation of your device. Please read it carefully before use.
The D101 Plus is a professional dual 10.1-inch full HD 1920x1200 IPS monitor designed for news production, post-production, broadcasting trucks, special vehicles video surveillance, and other professional fields. It features a 4RU rack mount design, flexible button operation, and a new iconized menu interface. Key features include accurate full waveform analysis, 3D LUT support, and remote control via Ethernet.
FEELWORLD D101 Plus Dual 10.1 inch 4RU Rackmount Monitor with two screens displaying video content.
2. Safety Information and Cautions
To ensure safe operation and prevent damage to the product, please observe the following cautions:
- Avoid dropping the device, as this can cause damage.
- The screen is made of glass; handle with care to prevent injury if it breaks.
- Keep the product away from heat sources and prolonged direct sunlight exposure to prevent damage to the LCD screen.
- Do not attempt to disassemble or repair the unit yourself. Unauthorized repairs can damage the product and void the warranty.
- To protect the screen and housing:
- Do not hit the screen with hard objects.
- Do not force or aggressively wipe the screen or housing.
- Do not use chemical solutions or spray detergents directly on the screen or housing for cleaning.
- Do not write on the screen or stick anything to it.
- Clean the screen and housing with a clean, soft cloth. Ensure no water or cleaning solution remains on the surfaces.
3. Setup and Connections
3.1 Front Panel Features
The front panel provides controls and indicators for easy operation.
Front view diagram of the monitor, showing controls and dimensions.
| Item | Description |
|---|---|
| Tally indicator | Indicates on-air, preview, or recording status (red, green, yellow). |
| Standby power on/off key | Powers the unit on or off. |
| F1/F2 | Custom function shortcut buttons. |
| Menu return | Returns to the previous menu or exits the menu. |
| ∧/∨ (+/-) | Previous/Next item selection; parameter increasing/decreasing; Volume adjustment (when menu is not displayed). |
| MENU | Main menu access, enter/confirm selection. |
| MODE | Input signal selection and confirmation. |
| Earphone jack port | 3.5mm stereo earphone output. |
3.2 Rear Panel Features
The rear panel houses all necessary input and output connections.
Rear panel connections for the FEELWORLD D101 Plus monitor.
| Port | Description |
|---|---|
| DC 12V Power Input | Standard DC power input. |
| 4-pin XLR DC12V power input | Professional power input option. |
| 3G/SDI IN/OUT (optional) | SDI serial data input and output. |
| CVBS IN/OUT | Composite video broadcast signal input and output. |
| AUDIO L/R | Left and Right audio signal inputs. |
| HDMI IN/OUT | High definition multimedia interface input and output. |
| USB | For firmware updates and LUT file importing. |
| LAN IN | Ethernet LAN Connector for remote control. |
| TALLY indicator input port | Input for TALLY light signals. |
3.3 Power Input
The monitor supports two power input methods:
- DC Power Input Port: Use a DC5.5*2.1mm DC power plug. Ensure the power supply is qualified with an output of no less than 24W DC 9-24V.
- 4-pin XLR Interface Power Supply: Pay close attention to the polarity to avoid damaging the monitor.
Pin Number Signal 1 GND 2 No connection 3 No connection 4 +12V
3.4 TALLY Indicator Connection
Connect the TALLY signal to the input port. The pin connections are as follows:
| Indicator Color | 1 Screen | 2 Screen |
|---|---|---|
| Green | 1-5 | 3-8 |
| Red | 6-5 | 4-8 |
| Yellow | 9-5 | 7-8 |
Note: GND port 5 and 8 are shared.
4. Operating Instructions
4.1 Ethernet Connection and Remote Control
The monitor can be controlled remotely via an Ethernet connection using dedicated software. This allows for centralized control of multiple monitors from a single computer.
- Connect the LAN port on the back of the monitor to your network (e.g., via a router). The monitor will display the same IP address as the connected device.
- Download the control software from the official FEELWORLD website: www.feelworld.cn (look for D101PLUS or D101PLUS-H details page).
- After downloading, open the file (e.g.,
feelworld.exe) and double-click to launch the application. - At the login screen, enter the default credentials:
- Username: admin
- Password: 123456
- After logging in, click "Add monitor".
- Input the IP address displayed on the monitor.
- Once connected, the software will show the connection status. You can then select the controlled monitor (0 for the left monitor, 1 for the right monitor) and use the control bars to adjust parameters.
FEELWORLD D101 Plus Dual 10.1 inch Rackmount Monitor integrated into a multi-screen production setup.
4.2 Menu Function Introduction
The monitor's menu system allows access to various functions and settings. Navigation is done using the front panel buttons or the remote control software.
Functional Assist
These features aid in accurate video monitoring and analysis.
| Feature | Description |
|---|---|
| All Waves | Displays waveform, vector, histogram, and embedded audio simultaneously. |
| Waveform | Assists with camera calibration by showing overall image brightness and checking lighting evenness. Modes: RGB, YUV, Y. Waveform Trans: Off, 25%, 50%, 75%. |
| Vector | Shows image saturation and color spectrum distribution. |
| Histogram | Displays the tonal distribution of the image. Modes: RGB1, RGB2, Y. |
| Focus Assist | Highlights in-focus areas. Color options: Red, Green, Blue. Peaking Level adjustable from 1-10. |
| Embedded Audio | Audio Level Meters provide numerical indicators and headroom levels. Green for normal, yellow for -20dB, red for -9dB. |
| Over Exposure | Indicates areas of overexposure. Exposure Level adjustable from 10-100. |
| Check Field | Displays specific color channels (Red, Green, Blue, Mono). |
| False Colors | Uses color overlays to represent exposure levels. |
| Time Code (SDI only) | Displays LTC and VITC time codes for synchronization. |
Monitor display with waveform, vector scope, and histogram overlays for detailed video analysis.
Mark
Tools for framing and composition.
| Feature | Description |
|---|---|
| Nine Grid | Divides the screen into nine equal sections. Color options: Red, Green, Blue, Black, White, Gray. |
| Safe Frames | Displays safe area markers. Modes: 80%, 85%, 90%, 93%, 96%, 2.35:1. Color options: Red, Green, Blue, Black, White, Gray. |
| Center Marker | Displays a crosshair in the center of the screen. Color options: Red, Green, Blue, Black, White, Gray. |
| Ratio Marker | Displays various aspect ratio markers. Modes: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1. Color options: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5. |
Display Settings
Adjustments for how the image is presented.
| Feature | Description |
|---|---|
| Scan Mode | Options: Under Scan, Over Scan. |
| Aspect Ratio | Adjusts the display aspect ratio. Options: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen. |
| Anamorphic | De-squeezes anamorphic footage. Modes: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X-2.00X). |
| Image Flip | Flips the image horizontally (H Flip), vertically (V Flip), or both (H_V Flip). |
| Zoom Mode | Magnifies the image. Modes: 2X, 4X, 9X, 16X, User. |
| Image Freeze | Freezes the current video frame. |
| P2P (Pixel-to-Pixel) | Displays the image at its native resolution without scaling. |
User Settings
Customizable options for advanced users.
| Feature | Description |
|---|---|
| LUT (Look Up Table) | Enables LUT switch for color grading. Supports SLOG2, SLOG3, LOGC, VLOG. |
| LUT Import | Copy 3D LUT files to a USB flash drive, insert into USB adapter cable (USB-female to mini-USB), then press MENU and Confirm to import. |
| LUT Table | Shows 4 built-in LUTs and up to 32 custom loaded LUTs. |
Display Adjustment
Basic image quality controls.
| Setting | Range |
|---|---|
| Backlight | 0-100 |
| Brightness | 0-100 |
| Contrast | 0-100 |
| Saturation | 0-100 |
| Tint | 0-100 |
Color Adjustment
Fine-tuning of color temperature and individual RGB channels.
| Setting | Description/Range |
|---|---|
| Color Temp. | 5600K, 6500K, 9300K, User. |
| User RGB | Red, Green, and Blue channels adjustable from 0-255. |
Shortcut Key Setup
Customize F1 and F2 buttons for quick access to functions.
- Press the MENU button to enter the menu.
- Navigate to "User" using the ∧/∨ buttons and press MENU to confirm.
- Select "Shortcut Key" and press MENU to confirm.
- Choose F1 or F2, then select the desired function from the pop-up list and press MENU to confirm. The cursor color will change to gray to indicate confirmation.
System Settings
General monitor configurations.
| Setting | Options/Description |
|---|---|
| Language | English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese Style, Korean, Russian. |
| OSD Time | On-screen display timeout: Off, 15Sec, 30Sec, 45Sec. |
| OSD Trans | OSD transparency: Off, 25%, 50%, 75%. |
| No Signal | Color displayed when no signal: Red, Green, Blue, Black, White, Gray. |
| Volume | On/Off, adjustable from 0-100. |
| Reset | Scroll the wheel to select Reset and press Confirm to restore factory settings. |
4.3 Firmware Update
To update the monitor's firmware:
- Copy the upgrade file to a USB flash drive.
- Insert the USB flash drive into the USB adapter cable (USB-female to mini-USB).
- Connect the adapter cable to the monitor's USB port.
- Press the "MENU" wheel button and select "Confirm" to initiate the update.
- The monitor will automatically restart after the upgrade is complete.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your monitor.
- Cleaning: Use a clean, soft, dry cloth to wipe the screen and housing. Do not use abrasive cleaners, solvents, or spray liquids directly onto the monitor.
- Storage: When not in use for extended periods, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handling: Always handle the monitor carefully to avoid physical shock or impact.
6. Troubleshooting
If you encounter any issues, please refer to the table below for common problems and solutions. If the problem persists, contact customer support.
6.1 Without Image Display
| Problem | Solution |
|---|---|
| Video cable off or connected incorrectly | Check the quality of the cable and ensure it's connected to the correct input interface. |
| Monitor not powered on | Check if the power is connected and press the power button to confirm. |
| Supply voltage instability | Ensure the power adapter plug is securely connected to the socket. |
| Self-contained power supply, polarity connected inversely | Refer to the "Power Input Way" section and reconnect with correct polarity. |
| Without video signal input | Check the signal source and output interface connection. |
6.2 Image/Color Display Abnormal
| Problem | Solution |
|---|---|
| Video cable poor contact | Change the video cable and try again. |
| Video signal interfered by external environment | Move to another environment or try again. |
| Video input signal amplitude too low | Check the signal source video output, or change the signal source and try. |
| Menu color saturation adjustment closing | Enter the menu to check color settings, or reset to factory settings. |
| Check Field set in mono or black & white | Reset Check Field to return to color display. |
| Image deformation | Reset the image ratio settings. |
6.3 Earphone Without Sound
| Problem | Solution |
|---|---|
| Audio cable off or connection properly | Confirm the audio cable is connected to the corresponding input port. |
| Volume adjustment was closed | Reset the volume control and adjust to a proper position. |
| HDMI cable poor Connected | Check the quality of the HDMI cable, or change the cable and try again. |
| No sound after switch video signal | Check if there is an AUDIO signal input in AV Mode. |
7. Specifications
7.1 General Parameters
| Parameter | Value |
|---|---|
| Panel Size | 10.1" IPS LCD×2 |
| Resolution | 1920 × 1200 pixels |
| Dot Pitch | 0.1128(H)×0.1128(V)mm |
| Aspect Ratio | 16:10 |
| Brightness | 500 cd/m² |
| Contrast | 1500:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Input Voltage | DC 9~24V |
| Power Consumption | ≤ 24 W |
| Special Function | TALLY indicator |
| Working Temperature | -10~60℃ |
| Storage Temperature | -30~70℃ |
| Unit Size | 482×177×25 mm |
| Unit Weight | ≈2048g |
7.2 Supported Signal Formats
| Signal Type | Supported Formats |
|---|---|
| Video | PAL/NTSC auto recognize |
| 480i/576i/480p/576p | |
| HDMI | 720p (60/59.94/50/30/29.97/25/24/23.98) |
| 1080i (60/59.94/50) | |
| 1080p (60/59.94/50/30/29.97/25/24/23.98) | |
| 3840×2160p (60/50/30/29.97/25/24/23.98) | |
| 4096×2160p (60/50/30/29.97/25/24/23.98) | |
| SDI | 720p (60/59.94/50/30/29/25/24/23.98) |
| 1080i (60/59.94/50) | |
| 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) |
8. User Tips
Based on general usage patterns for professional monitors:
- Calibration: For critical color work, regularly calibrate your monitor using external calibration tools to ensure accurate color reproduction.
- LUT Management: Organize your custom LUT files on the USB drive for easy import and quick access during production.
- Remote Control: Utilize the Ethernet remote control feature for efficient management in multi-monitor setups or when the monitor is in a hard-to-reach rack.
- Power Supply: Always use the recommended power supply (DC 9-24V, at least 24W) to prevent power-related issues. Double-check XLR polarity if using that input.
9. Support and Warranty
If you encounter any problems that cannot be resolved using the troubleshooting guide, please contact FEELWORLD customer support for assistance. Information regarding warranty terms and conditions can typically be found on the manufacturer's official website or included with your purchase documentation.
Please note that product specifications and features are subject to change without prior notice.