amagi Steering Wheel Centering Label

Contents

amagi Steering Wheel Centering Label User Manual

Personalized Centerline Marking for Automotive Steering Wheels

1. Product Overview

The amagi Steering Wheel Centering Label is a premium accessory designed to provide a clear visual indicator for the center position of your vehicle's steering wheel. Crafted from high-quality Alcantara and carbon fiber, it offers both functionality and an elegant aesthetic upgrade to your car's interior. This product is suitable for a wide range of vehicles, including Tesla Model 3, Y, S, BMW, Mercedes Benz, and Audi models.

Red Alcantara and carbon fiber steering wheel centering label on a black steering wheel.
The amagi Steering Wheel Centering Label in red, showcasing its design and material.
Multiple color options of the steering wheel centering label applied to a steering wheel.
Available in multiple colors to match your vehicle's interior.

2. Safety Information & Warnings

  • Do not overload: This product is a decorative and functional marker. Do not use it for purposes other than its intended design.
  • Observe safe operating procedures: Ensure the label is securely attached and does not interfere with the safe operation of the steering wheel or any other vehicle controls.
  • Avoid dropping: Handle the product with care to prevent damage.
  • Keep out of reach of children: Small parts could pose a choking hazard.

3. Installation Instructions

  1. Inspect the Product: Before installation, carefully inspect the centering label for any signs of damage or defects.
  2. Clean the Surface: Ensure the steering wheel surface where the label will be applied is clean, dry, and free from dust, grease, or wax. Use an automotive-safe cleaner if necessary.
  3. Positioning: Carefully determine the exact center position on your steering wheel where you wish to apply the label. It is recommended to mark the position lightly with a non-permanent marker or tape for accuracy.
  4. Peel Adhesive Backing: Gently peel off the protective backing from the adhesive side of the centering label. Avoid touching the adhesive surface with your fingers to maintain its stickiness.
    A hand peeling the adhesive backing off the centering label.
    Carefully peel off the adhesive backing.
  5. Apply the Label: Align the label with your pre-marked center position. Once aligned, press the label firmly onto the steering wheel surface, working from the center outwards to remove any air bubbles.
  6. Secure Attachment: Apply even pressure across the entire label for at least 30 seconds to ensure strong adhesion. Allow the adhesive to cure for a few hours before extensive use of the steering wheel.

4. Usage

The Steering Wheel Centering Label serves as a visual reference point, helping drivers quickly identify the straight-ahead position of their steering wheel. This can be particularly useful in performance driving, track days, or simply for maintaining a consistent driving posture.

Red centering label providing a visual guide on a steering wheel.
The label provides a clear visual indicator for steering wheel alignment.

5. Maintenance

To maintain the appearance and longevity of your Alcantara and carbon fiber centering label:

  • Cleaning: For general cleaning, gently wipe the Alcantara surface with a soft, damp cloth. For stubborn stains, use a specialized Alcantara cleaner according to its instructions. Avoid harsh chemicals or abrasive materials.
  • Protection: Keep the label away from direct sunlight for prolonged periods to prevent fading.
  • Avoid Damage: Be mindful of sharp objects or excessive friction that could damage the Alcantara or carbon fiber finish.

6. Troubleshooting

  • Label not sticking: Ensure the steering wheel surface was thoroughly cleaned and dry before application. Re-apply with new adhesive if necessary, or ensure sufficient pressure was applied during initial installation.
  • Label peeling at edges: This may occur if the surface was not perfectly clean or if insufficient pressure was applied. Press down firmly on the edges to re-secure. If peeling persists, consider re-application.
  • Incorrect alignment: If the label is misaligned, it may be possible to carefully peel it off and re-apply if done immediately after initial placement. For labels that have fully cured, removal might damage the adhesive or the label itself.
  • General issues: If you encounter any other issues or if the product is not functioning as expected, please contact after-sales service for assistance.

7. Specifications

Feature Detail
Product Name Correction Mark / Centering Label
Brand amagi
Materials Alcantara, Carbon Fiber
Color Options Twelve colors (e.g., Brown, Gold, Orange, Silver, Red, White, Blue, Green, Black, Yellow, Purple, Transparent)
Dimensions (L x W) 14 cm x 1.5 cm
Thickness 1.2 mm
Weight 5 g
Sticker Placement Internal, Steering Wheel
Origin Mainland China
Compatibility General purpose vehicles, including Tesla Model 3/Y/S, BMW, Mercedes Benz, Audi
Product information diagram showing dimensions of 14cm length and 1.5cm width, and a weight of 5g.
Product dimensions and weight.
Close-up image highlighting the 1.2mm thickness of the centering label.
The label features a slim 1.2mm thickness for a comfortable feel.

8. User Tips

  • For best adhesion, ensure the steering wheel is at room temperature during application.
  • Use a ruler or measuring tape to precisely locate the center point before peeling the adhesive.
  • Consider using painter's tape to create temporary guide lines for perfect alignment.
  • If applying to a textured steering wheel, ensure the adhesive makes full contact with the surface.

9. Warranty and Support

For any product-related inquiries, troubleshooting assistance, or warranty claims, please contact the seller's after-sales service. Additional product guides and documents may be available in PDF format. For a general automotive tool user manual, you may refer to the document available at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.