Bentley B60

Contents

Bentley B60 AI Smart Bluetooth Ear Clip Headphones

User Manual

Model: B60

Introduction

Welcome to the Bentley B60 AI Smart Bluetooth Ear Clip Headphones user manual. These headphones are designed to provide a superior audio experience with advanced features like AI superpower, smart noise cancellation, real-time conversation translation, and a comfortable ear-clip design. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Bentley B60 Ear Clip Headphones in black, silver, and pink, showing key features like Bluetooth V6.0, 15-20m transmission distance, and 300mAh charging case battery capacity.
Bentley B60 Ear Clip Headphones overview, highlighting Bluetooth V6.0, 15-20m transmission, and 300mAh charging case battery.

Key Features:

  • Patented Design
  • DeepSeek AI Superpower
  • Smart Noise Cancellation
  • Brand-New Bluetooth V6.0
  • Real-Time Conversation Translation
  • Comfortable Ear Clip Design
  • Ultra-long Standby Battery Life
  • High-Precision Zinc Alloy One-Piece Headset Housing
  • Professional Titanium-Coated Diaphragm for Cinema-Grade Sound Quality

Important Safety Instructions

Please read and follow these safety instructions carefully to prevent damage to the product or injury to yourself and others.

  • When using the headphones, keep the volume low and gradually adjust to a comfortable level. Prolonged high-intensity use may damage hearing.
  • Do not use headphones while cycling, driving, or in any situation where you need to hear surrounding sounds for safety.
  • If the headphones feel hot or lose sound, remove and disconnect them immediately.
  • Do not place headphones near heat sources such as fires, radiators, stoves, or other heat-generating devices.
  • Use only the instructions provided for this model.
  • Turn off the headphones when fully charged, not in use for a long time, or when not suitable for use.
  • Do not attempt to disassemble or alter the device. Any scratches, peeling, punctures, or removal of tags will void the warranty.

Product Overview and Components

Familiarize yourself with the different parts of your Bentley B60 headphones and charging case.

Diagram of Bentley B60 Ear Clip Headphones and charging case with labeled components.
Product schematic showing the earbuds and charging case components.

Components:

  • Earbuds: Left and Right ear clip headphones.
  • Charging Case: Stores and charges the earbuds.
  • USB-C Interface: For charging the case.
  • LED Indicator Light: Displays charging status and pairing mode.
  • Microphone: For calls and voice commands.
  • Charging Contacts: On earbuds and inside the case.
  • Touch Button: For controlling playback, calls, and voice assistant.
  • Reset Button: Located on the charging case for factory reset.

Initial Setup and Pairing

Follow these steps to set up and pair your Bentley B60 headphones with your device.

1. Power On

  1. Open the lid of the charging case.
  2. Take out both the left and right earbuds.
  3. The earbuds will automatically power on, and both will show blue and white lights flashing rhythmically, indicating they are in pairing mode.

2. Bluetooth Pairing

  1. On your mobile phone or other device, enable the Bluetooth search function.
  2. Look for the Bluetooth name "BentleyB60" in the list of available devices.
  3. Select "BentleyB60" to connect. For some phones, you may need to manually click "Pair" to confirm the connection.
  4. Once connected, the earbuds will automatically pair with your device.
Smartphone screen showing BentleyB60 connected via Bluetooth, with the silver earbuds and charging case in the background.
Bluetooth V6.0 ensures a stable connection with strong anti-interference.

Important Notes on Pairing:

  • The Bluetooth headphones have a pairing timeout of 3 minutes. If pairing is not completed within this time, they will automatically shut down. Repeat the steps if this occurs.
  • Keep the distance between your headphones and the connected device within 2 meters during pairing for optimal connection.

Operating Instructions

Your Bentley B60 headphones feature intuitive touch controls for various functions.

Diagram showing touch control gestures for calls, music playback, volume, and voice control on the earbud.
Custom touch controls for seamless operation.

Basic Controls:

Function Action
Power On Open charging case and remove earbuds.
Power Off Place earbuds back into the charging case and close the lid.
Answer Calls Double-tap the touch button on either earbud.
End Calls Double-tap the touch button on either earbud.
Reject Calls Press and hold the touch button on either earbud for 2 seconds.
Play/Pause Music Double-tap the touch button on either earbud.
Next Track Triple-tap the right earbud's touch button.
Previous Track Triple-tap the left earbud's touch button.
Volume Up Single tap the right earbud's touch button.
Volume Down Single tap the left earbud's touch button.
Voice Control (Activate Siri) Four taps on either earbud to wake the voice assistant; four more taps to exit.

Restore Factory Settings

  1. Place both earbuds into the charging case.
  2. Press and hold the case's reset button for 5 seconds.
  3. Remove the earbuds after 5 seconds. Both earbuds will flash blue and white, indicating they are entering pairing mode.
Smartphone displaying AI features like conversation, quick notes, translation, and search, with the black earbuds and charging case.
Cloud-Based Large Model Voice AI Upgrade for real-time assistance and translation.

Charging Instructions

Ensure your Bentley B60 headphones are always ready for use by following these charging guidelines.

  • Connect the charging case to a power source using a USB-C cable.
  • Low Battery (below 20%): The LED indicator light will flash orange.
  • Charging (above 20%): The LED indicator light will flicker white.
  • Fully Charged: The LED indicator light will remain on for 5 seconds and then turn off.
Pink earbuds and charging case with abstract blue and pink energy waves, illustrating ultra-long standby battery life.
Equipped with low-power Bluetooth technology for ultra-long standby battery life.

Care and Maintenance

Proper care will extend the life and performance of your headphones.

  • Cleaning: Use a soft, dry cloth to clean the earbuds and charging case. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the headphones in their charging case when not in use to protect them from dust and damage.
  • Avoid Moisture: Keep the headphones away from water and excessive humidity.
  • Temperature: Avoid exposing the headphones to extreme temperatures (hot or cold).

Troubleshooting

If you encounter any issues with your Bentley B60 headphones, try these solutions:

Problem Solution
Headphones won't turn on. Ensure the charging case is charged and the earbuds are properly seated. Charge the case if necessary.
Cannot pair with device.
  • Ensure Bluetooth is enabled on your device.
  • Make sure the earbuds are in pairing mode (blue and white lights flashing).
  • Forget "BentleyB60" from your device's Bluetooth list and try pairing again.
  • Perform a factory reset (see Operating Instructions).
  • Ensure the device is within 2 meters of the headphones during pairing.
No sound or low volume.
  • Check the volume levels on both your device and the headphones.
  • Ensure the headphones are properly connected to your device.
  • Try reconnecting the headphones.
Intermittent connection.
  • Ensure there are no obstructions between the headphones and your device.
  • Move closer to your device.
  • Avoid environments with strong electromagnetic interference.
Touch controls not responding.
  • Ensure your fingers are clean and dry.
  • Try restarting the headphones by placing them in the case and taking them out again.
  • Perform a factory reset.

Specifications

Detailed technical specifications for your Bentley B60 headphones.

Feature Detail
Material Metal (High-Precision Zinc Alloy Housing)
Style OWS Ear Clip Headphones
Communication Wireless
Wireless Type Bluetooth V6.0
Vocalism Principle Air Vocalism Principle
Volume Control Yes
Transmission Distance 15-20 meters
Charging Case Battery Capacity 300 mAh
Origin Mainland China
Package Weight 0.2 kg
Package Dimensions (L x W x H) 15 cm x 12 cm x 4 cm
Exploded view of an earbud showing the professional titanium-coated diaphragm and internal components.
Professional Titanium-Coated Diaphragm for Cinema-Grade Sound Quality.

User Tips

  • For the best sound experience, ensure the earbuds are securely clipped to your ears. The ear-clip design helps in directional sound transmission.
  • If you experience any lag or disconnection, try resetting the earbuds to factory settings and re-pairing them with your device.
  • Utilize the AI voice assistant for quick notes, translations, and searches to enhance your productivity and communication.
  • Keep the charging case regularly charged to ensure your earbuds are always ready for use, especially for long listening sessions.

Frequently Asked Questions (FAQ)

Q: How do I know if the headphones are fully charged?
A: The LED indicator light on the charging case will remain on for 5 seconds and then turn off when fully charged.
Q: Can I use only one earbud at a time?
A: Yes, you can use either the left or right earbud independently for calls or music.
Q: What is the range of the Bluetooth connection?
A: The headphones offer a transmission distance of 15-20 meters in an open environment.
Q: How do I activate the AI voice assistant?
A: Four taps on either earbud will wake the voice assistant (e.g., Siri). Four more taps will exit the session.

Warranty and Support

Warranty Coverage

Your Bentley B60 headphones are covered by a warranty for twelve months from the date of product sale. This warranty covers performance failures under normal use conditions.

Warranty Description

  • If a product performance failure occurs (subject to testing by the sales unit), the sales unit will provide warranty or replacement services as appropriate.
  • Please retain the product packaging and present it when seeking warranty services. Product replacement during the warranty period does not extend or recalculate the warranty period.

Situations Not Covered by Warranty

  • Products without performance faults, or unrecognizable headphone products (e.g., altered or missing LOGO).
  • Damage resulting from use not in accordance with the instructions, or products exceeding the warranty period.
  • Damage due to human negligence, incorrect usage, improper operation, rupture caused by human factors, burns, or water immersion.
  • Products that cannot be restored due to unauthorized disassembly or replacement of components by you or a third party.

For further support or warranty claims, please contact your point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.