LED Floodlight Fashion Flood lights

Contents

Waterproof LED Floodlight User Manual

Model: Fashion Flood lights

1. Introduction

Thank you for choosing our Waterproof LED Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your floodlight. Please read it thoroughly before use and retain it for future reference.

Video 1: Product Overview and Demonstration

2. Safety Information

  • Always disconnect power before installation, maintenance, or cleaning.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Ensure the mounting surface is strong enough to support the weight of the fixture.
  • Do not operate the floodlight if the housing or cable is damaged.
  • Keep flammable materials away from the floodlight during operation.
  • Avoid looking directly into the LED light source when it is on.

For more detailed safety guidelines, please refer to the official user manual PDF: User Manual (PDF)

3. Setup and Installation

Before installation, ensure the power supply is turned off at the circuit breaker.

  1. Choose Mounting Location: Select a suitable location for your floodlight. This fixture can be mounted on ceilings, walls, or on the ground.
  2. Mounting the Bracket: Use appropriate screws and anchors (not included) to securely attach the floodlight's mounting bracket to the chosen surface. Ensure the bracket is firmly fixed to prevent the light from falling.
  3. Adjusting the Angle: The floodlight features an adjustable bracket, allowing you to direct the light beam up to 120 degrees. Loosen the side screws, adjust to the desired angle, and then tighten the screws securely.
  4. Wiring Connection: Connect the floodlight's wires to your main power supply. The standard wiring color code is:
    • Brown Wire: Live (L)
    • Blue Wire: Neutral (N)
    • Yellow/Green Wire: Ground (GND)
    Ensure all connections are secure and properly insulated to prevent short circuits and electric shock.
  5. Power On: Once installation and wiring are complete, restore power to the circuit.
Diagram showing ceiling, ground, and wall mounting options with product dimensions.

Image 1: Mounting Options and Product Dimensions

Detailed view of floodlight wiring: brown, blue, and yellow/green wires.

Image 2: Wiring Details

4. Operating Instructions

This LED floodlight is designed for straightforward operation.

  • Power On/Off: The floodlight will illuminate when power is supplied to its circuit and turn off when power is disconnected. It does not feature an integrated switch.
  • Light Color: Depending on the model purchased, your floodlight will emit either Warm White or Cool White light.
Comparison of Warm White (2500-2800K) and Cool White (6000-6500K) light output.

Image 3: Light Color Options

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your floodlight.

  • Cleaning: Disconnect power before cleaning. Wipe the exterior of the floodlight with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
  • Inspection: Periodically check the mounting screws and electrical connections to ensure they are secure. Inspect the power cable for any signs of wear or damage.
  • Lens Condition: Ensure the lens is free from dirt, debris, or water spots that could obstruct light output.

6. Troubleshooting

If you encounter issues with your floodlight, try the following steps:

ProblemPossible CauseSolution
Light does not turn onNo power supply
Loose wiring connection
Faulty circuit breaker
Check power supply to the circuit
Verify all wiring connections are secure
Reset or check the circuit breaker
Light is dim or flickersLow voltage
Loose connection
Dust/dirt on lens
Ensure voltage is within 85-265V range
Check wiring connections
Clean the lens
Water inside the fixtureImproper sealing
Damage to housing
Ensure all seals are intact and screws are tightened
If housing is damaged, replace the unit

7. Specifications

FeatureSpecification
Model NumberFashion Flood lights
Luminous Flux249-2000 Lumens
Body MaterialAluminum
Protection LevelIP68
StyleModern Style
Light SourceLED bulbs (2835SMD LED Chip)
VoltageAC 85-265V
Power SourceAC
Bulbs IncludedYes
Item TypeFlood lights
Wattage50W (also available in 100W)
Color TemperatureWarm White (2500-2800K), Cool White (6000-6500K), 5600K (No plug model)
Dimensions (approx.)205mm (Length) x 100mm (Width) x 45mm (Depth)
CertificationsVDE, UL, SAA, RoHS, PSE, LVD, GS, FCC, EMC, CQC, CE, CCC
Diagram showing aluminum lamp body and 2835SMD LED Chip components.

Image 4: Internal Components

CE and RoHS compliance certificates for the LED floodlight.

Image 5: Certifications (CE & RoHS)

8. User Tips

  • For optimal outdoor illumination, consider mounting the floodlight at a height that allows for wide light dispersion without creating harsh shadows.
  • When installing multiple floodlights, ensure even spacing to avoid dark spots and achieve uniform lighting.
  • Regularly check the light's direction and adjust as needed, especially after strong winds or heavy rain, to maintain desired coverage.

9. Warranty and Support

Your LED Floodlight comes with the following warranty and support:

  • Return Policy: Enjoy 7 days to return if any quality problems are encountered.
  • Warranty: All products have a 1-year warranty from our store, covering manufacturing defects.
  • Customer Support: For any inquiries or assistance, please contact our customer service. All emails will be answered within 24 hours.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.