SNDWAY SW-50Pro, SW-70Pro, SW-100Pro

Contents

Laser Distance Meter User Manual

Models: SW-50Pro, SW-70Pro, SW-100Pro

1. Introduction

This professional laser distance meter is designed for accurate and efficient measurement in various applications, including construction, interior decoration, engineering, and general daily measuring tasks. It offers high-precision measurements and a range of practical functions in a compact and user-friendly design.

Please read this manual carefully before using the device to ensure safe and correct operation.

2. Safety Information

WARNING: Laser Radiation

  • This device uses a Class II laser (630-670nm, <1mW).
  • Do not stare directly into the laser beam.
  • Do not aim the laser beam at people or animals.
  • Avoid direct eye exposure to the laser beam.
  • Keep the device out of reach of children.

Improper use can result in hazardous laser radiation exposure.

3. Package Contents

Upon opening the package, please verify that all items are present and in good condition:

  • Laser Distance Meter (SW-50Pro, SW-70Pro, or SW-100Pro model)
  • User Manual (this document)
  • Wrist Strap
Package contents including laser distance meter, manual, and wrist strap
Figure 1: Typical package contents

4. Product Overview

The laser distance meter features a high-definition large screen display for clear readings and physical level bubbles for more reliable measurement results.

Close-up of the laser distance meter display showing clear readings
Figure 2: High-definition display for clear reading
Laser distance meter showing horizontal and vertical level bubbles
Figure 3: Physical level bubbles for accurate alignment

5. Setup

5.1. Battery Installation

The device is powered by two 1.5V AAA alkaline batteries. Batteries are typically not included in the package.

  1. Locate the battery compartment on the back of the device.
  2. Slide open the battery compartment cover.
  3. Insert two AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.
Back of the device with battery compartment open, showing two AAA batteries
Figure 4: Battery compartment with AAA batteries
Laser distance meter next to two green AAA batteries
Figure 5: Device powered by 1.5V AAA alkaline batteries

6. Operating Instructions

6.1. Power On/Off

  • Press the READ button to turn on the device.
  • The device will automatically turn off after 150 seconds of inactivity.
  • The laser will automatically turn off after 20 seconds of inactivity.

6.2. Basic Measurement

To perform a single distance measurement:

  1. Point the laser at the target surface.
  2. Press the READ button. The measured distance will be displayed on the screen.
User holding the laser distance meter, showing a measurement of 1.887m on the display
Figure 6: Performing a single measurement

6.3. Measurement Functions

The device supports various measurement modes:

Laser distance meter display showing various measurement function icons: single measurement, continuous measurement, one-time Pythagorean, double Pythagorean, area, volume, addition/subtraction, and maximum/minimum value.
Figure 7: Available measurement functions
  • Single Measurement: Measures the distance from the device to a single point.
  • Continuous Measurement: Allows for dynamic measurement, displaying real-time distance as the device is moved. Also shows Max/Min values.
  • Area Measurement: Measures length and width to calculate the area.
  • Volume Measurement: Measures length, width, and height to calculate the volume.
  • Pythagorean Measurement (One-time & Double): Calculates indirect distances using the Pythagorean theorem.
  • Addition/Subtraction: Adds or subtracts measurement results.
  • Area & Volume Add/Subtract: Adds or subtracts calculated areas or volumes.
  • Max/Min Value: Displays the maximum and minimum values during continuous measurement.

Refer to the on-screen icons and the full PDF manual for detailed instructions on selecting and using each mode.

7. Self-Calibration

The device supports self-calibration, allowing you to adjust the measurement error by up to ±9mm. This ensures optimal accuracy over time.

Laser distance meter display showing 'CAL' and a numerical value, indicating the self-calibration function with an adjustable error of up to ±9mm.
Figure 8: Self-calibration interface

Consult the full PDF manual for specific steps on how to access and perform self-calibration.

8. Data Storage

The device can store up to 99 sets of measurement data, allowing you to review past measurements at any time.

Laser distance meter display showing multiple stored measurements and a data storage icon
Figure 9: Data storage feature

Instructions for accessing and managing stored data can be found in the detailed PDF manual.

9. Maintenance

  • Keep the device dry and clean. Wipe it with a soft, damp cloth if necessary.
  • Do not immerse the device in water or other liquids.
  • Store the device in a cool, dry place when not in use.
  • Remove batteries if the device will not be used for an extended period to prevent leakage.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.

10. Troubleshooting

Error 1: Measurement Failure in Bright Sunlight

Symptom: The device displays "Error 1" or fails to measure accurately, especially during daytime or in strong sunlight.

Cause: Strong sunlight interferes with the laser beam, making it difficult for the device to detect the target or receive a clear reflection. The laser point may also be difficult to see.

Solution:

  • For long-distance measurements during the day, try to perform them in shaded areas.
  • Point the laser at opaque surfaces rather than reflective ones.
  • Avoid measuring in direct sunlight.
  • The laser is more visible and has a longer range in darker environments.

11. Specifications

Item SW-50Pro SW-70Pro SW-100Pro
Max Measuring Range 0.05-50m 0.05-70m 0.05-100m
Distance Measuring Accuracy ±(2mm + D×1/10000) ±(2mm + D×1/10000) ±(2mm + D×1/10000)
Continuous Measurement ✔ ✔ ✔
Area & Volume Measurement ✔ ✔ ✔
Pythagorean Measurement ✔ ✔ ✔
Add/Subtract Measurement ✔ ✔ ✔
Area & Volume Add/Subtract ✔ ✔ ✔
Max/Min Value ✔ ✔ ✔
Self-Calibration ✔ ✔ ✔
Audio Prompt ✔ ✔ ✔
Laser Class Class II Class II Class II
Laser Type 630-670nm, <1mW 630-670nm, <1mW 630-670nm, <1mW
Data Storage 99 Sets 99 Sets 99 Sets
Auto Laser Off 20s 20s 20s
Auto Power Off 150s 150s 150s
Battery Life 8000 Measurements 8000 Measurements 8000 Measurements
Storage Temperature -20°C ~ 60°C -20°C ~ 60°C -20°C ~ 60°C
Operating Temperature 0°C ~ 40°C 0°C ~ 40°C 0°C ~ 40°C
Humidity 20%~80% RH 20%~80% RH 20%~80% RH
Power Supply 2×1.5V AAA 2×1.5V AAA 2×1.5V AAA
Product Dimensions 115×52×25mm 115×52×25mm 115×52×25mm

Certification: CE

Origin: Mainland China

12. User Tips

  • Check Measurement Units: Before starting measurements, ensure the device is set to your preferred metric system (e.g., meters, feet). Incorrect unit settings can lead to misinterpretations of results.
  • Accuracy Verification: For critical measurements, it is recommended to verify the device's accuracy against a known standard, such as a steel tape measure, especially after initial setup or if you suspect discrepancies. Users have reported high accuracy when compared to traditional methods.
  • Optimal Conditions: While the device is versatile, its performance can be affected by environmental factors. For best results, especially over longer distances, use the device in stable conditions with minimal light interference.

13. Warranty and Support

For detailed warranty information and technical support, please refer to the official documentation provided with your product or contact the seller directly.

A comprehensive user manual in PDF format is available for download. This manual contains more in-depth instructions and diagrams for advanced features and troubleshooting.

Download User Manual (PDF): Click here to view the User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.