1. Product Overview
The NYXI Hyperion 3 is a magnetic split controller designed for the Nintendo Switch 2, offering enhanced ergonomics, precision controls, and customizable features. It features Hall Effect joysticks to prevent drift, mechanical micro-switch buttons for tactile feedback, and a 9-axis gyroscope for accurate motion sensing.
Video: NYXI Hyperion 3 promotional video, showcasing features like magnetic attachment, Hall Effect joysticks, mechanical buttons, and RGB lighting.
Package Contents
- Left Controller x1
- Right Controller x1
- Rechargeable Center Bridge x1
- Replaceable D-pad x1
- USB-C Charging Cable x1
- Product User Manual (with Warranty Card) x1
Image: The package contents, including the Hyperion 3 controller, manual, USB-C cable, and replaceable D-pad, with dimensions.
2. Setup
Compatibility
The NYXI Hyperion 3 controller supports Nintendo Switch 2 host systems running version 20.0 and above.
Controller Layout
Familiarize yourself with the buttons and ports on your controller and center bridge:
Image: Front view of the NYXI Hyperion 3 controller, highlighting RGB lighting on joysticks and vertical strips.
- Left Controller: - Button, L Button, Left Joystick, D-Pad, Screenshot Button, T Button (Turbo)
- Right Controller: + Button, R Button, BAXY Buttons, Right Joystick, HOME Button, C Button, T Button (Turbo)
- Back/Side Buttons: ZR, ZL, Magnetic Detachment Button, GR (Macro), GL (Macro), SR, SL, SYNC Button
- Center Bridge: Type-C Charging Port, Left/Right Controller Charging Indicator Light, Left/Right Controller Charging Dock
Wired Connection (Handheld Mode)
- Align the left controller's '-' key and the right controller's '+' key upwards.
- Magnetically attach them to the corresponding magnetic ports on both sides of your Nintendo Switch 2 console.
- The console will indicate a successful connection with an animation on both sides.
Image: Controller attached to a Switch 2, highlighting the secure magnetic snap and lock mechanism.
Bluetooth Connection (Wireless Mode)
- Power on your Nintendo Switch 2 console.
- On the main interface, tap the controller icon with your finger, then select the "Change Grip/Order" screen.
- Press and hold the SYNC button on the left (or right) controller for 3 seconds until the RGB indicator flashes rapidly. This enters Bluetooth pairing mode.
- The console will automatically search for and pair with the controller.
- After successful connection, the controllers' RGB indicators will display solid lights in the following channel colors:
- Channel 1: Solid Orange
- Channel 2: Solid Green
- Channel 3: Solid Blue
- Channel 4: Solid Purple
Keylinker App Connection
The Keylinker App allows for advanced customization of your controller. Scan the QR code below or search for "KeyLinker" in your app store.
Image: QR code for downloading the Keylinker App.
- Download and install the "KeyLinker" app.
- Grant necessary permissions upon first launch.
- In Android/iOS mode, connect your phone's Bluetooth, find "NYXI NJ22", and tap to pair.
- After successful connection, tap the settings button next to the device name to enter the controller customization interface.
- Within the app, you can remap buttons, adjust joystick/trigger curves, modify motor vibration intensity, set Turbo speed, and program macros.
- Click "Apply" to save any changes.
3. Operating Instructions
Power On/Off
- Power On (Reconnect): In the off state, press any button to power on and enter reconnect mode.
- Power On (Pairing): In the off state, hold the SYNC button for 3 seconds to power on and enter pairing mode.
- Power Off: In the on state, hold the left controller's Capture button or the right controller's Home button for 3 seconds.
- Immediate Power Off: In the on state, short press the SYNC button.
- Auto Power Off: The controller will power off if the connected host enters sleep mode or turns off Bluetooth.
Bluetooth Reconnection & Wake-up
- Reconnection: After initial pairing, if the controller is in sleep mode and the console is on, press any button (except L3, R3, TURBO) to reconnect via Bluetooth. (Avoid touching joysticks during reconnection).
- Wake-up: After initial pairing, if both the console and controller are in sleep mode, press the Home button on the right controller to wake up the console and reconnect.
Turbo Function
- Assign Turbo:
- Left Controller: Hold the Turbo button + UP, DOWN, LEFT, RIGHT, ZL, or L.
- Right Controller: Hold the Turbo button + A, B, X, Y, ZR, or R.
- Auto Turbo: Press and hold the Turbo button + the assigned button again to set it to auto turbo mode.
- Cancel Turbo: Press and hold the Turbo button + the assigned button again to cancel the turbo function.
- Clear All Turbo: Press and hold the left or right Turbo button for 5 seconds. The controller will vibrate for 1 second, indicating all turbo assignments are cleared.
- Turbo Speed Adjustment: There are three adjustable speeds: Fast / Medium / Slow. Hold Turbo + push the joystick up to increase speed, or push down to decrease. The default speed is Medium.
Image: Controller attached to a Switch 2, demonstrating 3-level Turbo function (Fast, Medium, Slow) and options for Manual, Auto, and Off Turbo.
Back Button Mapping & Macro Programming
The GL/GR buttons on the back can be mapped to specific function keys or programmed as macros.
- Enter Customization Mode: While connected to the host, hold the TURBO button and press the GL/GR button once. Release both. The RGB indicator will flash white rapidly, and the controller will vibrate for 1 second.
- Map Single Function Key: In customization mode, press a desired function key (e.g., L for GL, A for GR). The indicator will flash once. Press the GL/GR button again to exit.
- Macro Programming: In customization mode, input multiple function keys in sequence. Press the GL/GR button again to exit and save as a macro. A single custom button can store up to 21 key inputs.
- Clear Custom Functions: While connected, hold TURBO and press GL/GR once. Briefly press GL/GR again to clear functions. A 1-second vibration confirms clearing.
Image: Controller attached to a Switch 2, showing Dual Macro Programming with customizable GL/GR buttons for complex combos.
Vibration Intensity Adjustment
The grip motors have 3 vibration levels: Off, Low, and High (factory default is Low).
- Hold the TURBO button and push the joystick left (decrease) or right (increase) to adjust the intensity.
- The levels cycle through Off → Low → High.
- The controller will vibrate at the corresponding intensity for 1 second after each adjustment.
- The current vibration intensity is remembered even after power-off.
Image: Controller showing Dual Vibration Function with 5-level vibration adjustment.
RGB Lighting
- Cycle Modes: Hold the TURBO button and single-press the left controller's '-' button or the right controller's '+' button to cycle through 8 solid color modes (Red, Orange, Yellow, Green, Blue, Indigo, Purple, Pink) and one mixed-color mode.
- Toggle Lighting: Hold the TURBO button and double-press the left controller's L3 or the right controller's R3 button to turn off all RGB lighting. Double-press again for mixed-color breathing mode, and a third time for mixed-color flowing light mode.
- Adjust Brightness: Hold the TURBO button and press and hold the left controller's L3 or the right controller's R3 button. The brightness will cycle from dim to bright. Release the button to set the brightness.
4. Maintenance
Charging
- Via Console: Magnetically attach controllers to the sides of the Switch 2 console. If the console is charging via its adapter, the controllers will also charge. The RGB indicator breathes in its current color and stays solid when fully charged.
- Via Controller's USB Port: Connect a USB-C cable directly to the controller. The RGB indicator breathes red while charging and turns off when fully charged. (Note: Cannot charge via controller's USB port while connected to a host).
- Via Center Bridge: Connect a charger to the center bridge's charging port. Both left and right charging indicators on the bridge will flash red (0.5s), then green (0.5s), then turn off. Place a controller into a charging slot; its corresponding indicator lights solid red. It turns solid green when fully charged.
Image: Controller attached to Switch 2, on a charging dock.
Low Battery Warning
When the controller's battery voltage drops below 3.5V during connected use, the RGB indicator flashes red rapidly. If the voltage falls below 3.4V, the controller automatically shuts down.
Auto Sleep
When connected to a host, the controller enters sleep mode after 10 minutes of inactivity. The sleep timer can be adjusted in the Keylinker App.
Firmware Upgrade
- OTA via Phone: Connect to the KeyLinker App and use the OTA upgrade option in the menu.
- Via PC Software: Start the latest firmware upgrade software on a PC. With the controller off, hold the L3 (left joystick) or R3 (right joystick) button, then connect via USB cable. Once the "Upgrade" button becomes clickable, click it to start the upgrade.
- Firmware upgrades do not delete the controller's saved settings.
Precautions
- Do not expose the controller to liquid.
- Do not disassemble the controller.
- Avoid dropping the controller.
- Avoid exposing the controller to extremely high or low temperatures.
5. Troubleshooting
Resetting the Controller
If the controller malfunctions (e.g., button confusion, freezing, connection failure), try resetting it:
- Press and hold the HOME or Capture button for 10 seconds.
- Alternatively, short press the SYNC button to reset the controller state.
Lock Mode
- Activate: With the controller off, press and hold the SL + SYNC (MODE) buttons for 5 seconds. The RGB indicator will flash red slowly 3 times, and the controller enters lock mode. No button presses will wake it.
- Deactivate: Connect the controller to a host magnetically or plug in a USB cable for charging. This exits lock mode, allowing wake-up via any button.
Gyroscope Calibration
If motion controls are inaccurate, calibrate the gyroscope:
- Left Controller: In sleep mode, press L + UP + Capture button simultaneously. Place the controller flat on a level surface. Press '-' to exit calibration.
- Right Controller: In sleep mode, press R + X + HOME simultaneously. Place the controller flat on a level surface. Press '+' to exit calibration.
- Alternative Method via Host: On the console, go to Settings > Controllers & Sensors > Calibrate Motion Controls, then press and hold '+' or '-'.
Joystick Calibration
If joysticks are drifting or unresponsive, calibrate them:
- After connecting to the host, go to Settings > Controllers & Sensors > Calibrate Control Sticks to calibrate the joysticks.
6. Specifications
Technical Parameters of Game Controller
| Parameter | Value |
|---|---|
| Product Model | NS-202 |
| Product Code | NJ22 |
| Material | ABS |
| Weight (L+R controllers) | 215g |
| Input | 5V – 500mA |
| Operating Voltage | 3.7V |
| Charging Current | 400mA |
| Battery Capacity (each) | 600mAh |
| Operating Current (no vibration) | ~60mA |
| Operating Current (with vibration) | ~100mA |
| Dimensions (each controller) | 61.2 × 116.7 × 52.2 mm |
Technical Parameters of Center Bridge
| Parameter | Value |
|---|---|
| Material | ABS |
| Weight | 50g |
| Input | 5V – 1000mA |
| Operating Voltage | 5V |
| Operating Current | 800mA |
| Charging Current (per side) | 200mA |
| Dimensions | 115.6 × 46 × 16 mm |
Key Features Summary
- Hall Effect Joystick (No Drift)
- Micro-Switch D-Pad & A/B/X/Y Buttons
- Micro-Switch Trigger / Dual-stage Linear Trigger
- 9-Axis Gyro on Switch
- Pro Controller Mode / Handheld Mode
- Wake-up & Screenshot Feature
- Adjustable Turbo & Rumble Function
- Connectivity: Direct Connection, Bluetooth 5.0, USB-C Wired Connection
- Battery Life: 6-8 hours
- Charging Time: 2 Hours
Image: Comparison table of Hyperion 3 vs. Other controllers, detailing Gyroscope, Joystick, C-Button, Motor, Buttons, Wake-up, and Battery.
7. Warranty and Support
This product includes a user manual with a warranty card. Please refer to it for specific warranty terms and conditions.
For the full EU Declaration of Compliance, please visit: www.nyxigame.com
Manufacturer Information
Manufacturer: Shenzhen MIKE Morgen Technology Co., Ltd
Address: Room 302, Building 5, Zone C, Jinxiu Huacheng Park, Bantian Street, Longgang District, Shenzhen
Applicant: NYXI Gaming Inc
Address: 4520 Centennial Blvd NUM1004, Colorado Sorinas CO 80919
Regulatory Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The product conforms to EC standards for radio interference. Here, Shenzhen MIKE Morgen Technology Co., Ltd. in Shenzhen announces that NS-202 radio equipment conforms to the Directive. EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2010, ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), ETSI EN 300 328 V2.2.2(2019-07).
8. User Tips
- Enhanced Ergonomics: Many users find these controllers significantly more comfortable than standard Joy-Cons, especially for larger hands, allowing for longer gaming sessions without discomfort.
- Versatile Charging: The included charging bridge not only charges the controllers but also allows them to be used as a single wireless controller, offering flexibility in how you play.
- Check Firmware: It's a good practice to check for the latest firmware updates via the Keylinker App or PC software to ensure optimal performance and access to new features.
- Hall Effect Joysticks: Benefit from the drift-resistant Hall Effect joysticks for precise and reliable input, a significant upgrade over traditional potentiometer joysticks.
- Customization Shortcuts: Utilize the controller's shortcuts (e.g., Turbo + joystick for vibration/turbo speed, Turbo + L3/R3 for RGB) to quickly adjust settings without needing the app.
- Macro Programming: Take advantage of the dual macro programmable buttons (GL/GR) to execute complex combos with a single press, enhancing your gameplay.
9. Frequently Asked Questions (FAQ)
- Q: Does this controller have NFC functionality for Amiibo?
- A: The provided specifications do not indicate NFC functionality for Amiibo support.
- Q: Is this controller a 'Gen 2 Solution Protocol' model?
- A: The product information does not specify a 'Gen 2 Solution Protocol'. It is identified as Model NS-202 (NJ22).
- Q: Is this a copy or clone controller?
- A: The NYXI Hyperion 3 is a third-party controller designed for the Nintendo Switch 2, offering unique features and an alternative to official controllers.
- Q: Does it work with the Nintendo Switch OLED?
- A: This controller is specifically designed for the Nintendo Switch 2 and supports host systems running version 20.0 and above. Compatibility with other Switch models, such as the Switch OLED, is not officially stated in the provided documentation.