1. Introduction
The Staniot LoRa Wireless PIR Motion Detector (Model PR200) is designed to enhance your security system by detecting human presence and motion. Utilizing advanced LoRa technology, it offers a long communication distance and low power consumption, making it a reliable component for your home or business security. This manual provides detailed instructions for installation, setup, operation, and maintenance.
Important Note: This LoRa version motion sensor is compatible ONLY with the staniot Secpanel 7 Pro alarm system. It is NOT compatible with staniot Secpanel 7, Secpanel 5, Secpanel 3, or other 433MHz alarm hosts.
2. Package Contents
Please check the package for the following items:
- Motion Detector (1 unit)
- Bracket (1 unit)
- Screws (2 units)
- User Guide (This manual)

Image: Package contents of the Staniot LoRa PIR Motion Detector.
3. Product Overview
Familiarize yourself with the components and features of your motion detector.
3.1 Front View
- Detection Window: The area through which the sensor detects motion.
- LED Indicator:
- Blue: Indicates movement detected.
- Red: Indicates low power.
3.2 Back View & Internal Switches
The back of the device houses the battery compartment and configuration switches.
- 1.5V AA Battery x 2: Power source for the detector.
- Anti-tamper switch: Triggers an alarm if the detector is removed from its mounting.
- Power ON/OFF: Main power switch for the device.
- LED light switch: Controls whether the LED indicator lights up upon detection.
- Trigger time switch (5s/5min): Configures the re-triggering delay.

Image: Function Details - Internal components and switches.
4. Specifications
| Feature | Specification |
|---|---|
| Battery Specification | AA battery x 2 |
| Standby Current | ≤10µA |
| Alarm Current | ≤15mA |
| Detection Angle | 110° |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | LoRa |
| Wireless Distance | 500m |
| Product Size | 50 x 92mm |
| Certification | CE, RoHS |
| Smart Home Platform | Tuya |

Image: Product Parameters table.
5. Setup & Installation
5.1 Mounting Location and Height
The motion detector should be mounted at a height of 79 to 87 inches (2 to 2.2 meters) above the floor. Choose a location that provides the desired detection coverage without obstructions.

Image: Mounting height and detection area diagram.
5.2 Installation Steps
- Install the provided bracket securely on the wall using the screws.
- Insert the motion detector into the holder on the bracket.
- Adjust the angle of the motion detector to optimize its detection range.
5.3 DIP Switch Configuration
Before closing the detector, configure the internal DIP switches according to your preferences. Refer to the 'Product Overview' section for the location of these switches.
- Switch 1: LED Light Switch
- ON: The LED indicator will light up when motion is detected.
- OFF: The LED indicator will remain off when motion is detected (stealth mode).
- Switch 2: Trigger Time (Re-triggering Delay)
- ON: Sets a 5-minute delay before the sensor can re-trigger after an initial detection.
- OFF: Sets a 5-second delay before the sensor can re-trigger after an initial detection.
6. Pairing with Alarm System
Follow these steps to pair your motion detector with the Staniot Secpanel 7 Pro alarm system:
- On your Staniot Secpanel 7 Pro, navigate to the settings menu and enter your user code.
- Select the 'Sensor' option from the connection menu.
- Choose 'Motion' as the sensor type.
- Tap the 'Pair' button on the alarm panel. The panel will prompt you to trigger the accessory.
- Trigger the motion detector by either pressing its anti-tamper switch or by moving in front of it to activate detection.
- The alarm panel should confirm successful pairing.
Video Guide: Pairing and Alarm Demonstration
Video: This video demonstrates the pairing process of the motion sensor with a Staniot alarm panel and its alarm function.
7. Operating the Motion Detector
Once paired, the motion detector works in conjunction with your Staniot Secpanel 7 Pro alarm system.
- Arming the System: When your alarm system is armed (e.g., in 'Away' mode), the motion detector becomes active.
- Motion Detection: If the detector senses motion within its 110° detection angle and range, it will send a signal to the alarm panel.
- Alarm Trigger: Upon receiving a motion detection signal while armed, the alarm panel will trigger an alarm, which may include sirens, notifications, or other programmed responses.
- Disarming the System: To prevent false alarms when you are present, disarm your alarm system using the panel or associated app.
8. Maintenance
8.1 Battery Replacement
The motion detector is powered by 2 AA batteries. When the LED indicator shows a red light, it signifies low power, and the batteries need to be replaced.
- Carefully open the casing of the motion detector.
- Remove the old AA batteries.
- Insert two new 1.5V AA batteries, ensuring correct polarity.
- Close the casing securely.

Image: Low Power Consumption illustration.
9. Troubleshooting
9.1 False Alarms
- Pets: Motion sensors are generally not suitable for pets. If you have pets, ensure they cannot access the detection area or consider alternative sensor types.
- Heat Sources: Avoid installing the detector within 3 feet (1 meter) of heat sources such as electric heaters, vents, fireplaces, or other sources that may create turbulent air, as these can trigger false alarms.
- Drafts: Strong drafts from open windows or air conditioning units can sometimes cause false triggers. Ensure the detector is in a stable environment.
9.2 No Detection
- Obstructions: The motion detector cannot detect motion through glass (e.g., someone moving outside a window). Ensure there are no large appliances or furniture directly in front of or behind the detector that could block its signal or detection area.
- Incorrect Mounting: Verify the detector is mounted at the recommended height (79-87 inches / 2-2.2 meters) and its angle is adjusted correctly to cover the desired area.
- Power: Check if the batteries are low (red LED indicator) and replace them if necessary.
- Pairing: Ensure the detector is correctly paired with your Staniot Secpanel 7 Pro alarm system.
10. Important Notices
- Do not install the motion detector outdoors to avoid exposure to rain and extreme weather conditions.
- Motion detector cannot detect motion through glass, such as someone moving outside the window.
- Do not install the motion detector within 3 feet (1 meter) of heat sources such as electric heaters, vents, fireplaces, or other heat sources that may create turbulent air.
- Do not install the motion detector behind large appliances or furniture that may affect its signal transmission.
- To avoid false alarms, make sure your pets cannot get close to it.

Image: Important tips regarding pet compatibility and contacting support.
11. User Tips
- The LoRa technology in this detector offers a significantly better range compared to older, non-LoRa models, allowing for broader coverage.
- Users have found the setup process to be quick and straightforward.
- Some packages may include batteries, which is a convenient bonus.
- Remember to consider the 'not suitable for pets' warning to prevent unnecessary alarms.
12. Warranty & Support
For any questions, technical support, or warranty claims, please refer to the official Staniot website or contact your retailer. A detailed user manual in PDF format may also be available for download from the manufacturer's support page.
PDF Manual Reference: View User Manual (PDF)
13. Certifications
This product complies with the following standards:
- CE (Conformité Européenne)
- RoHS (Restriction of Hazardous Substances)