1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Bileeko HD 480P Universal Backup Camera. Designed for a wide range of vehicles including cars, MPVs, vans, trucks, and lorries, this camera offers clear, wide-angle rear vision with starlight night vision capabilities. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Safety Information
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Only connect the camera to a 12V power source.
- Professional installation is recommended for optimal performance and safety.
- Do not attempt to disassemble or modify the camera, as this may void the warranty and cause damage.
- Always check your surroundings manually before relying solely on the backup camera.
3. Package Contents
Please verify that all items are present and in good condition:
- 1x Universal Car Rear View Backup Camera
- 1x Video Cable (6 meters)
- 1x Power Cable
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Bileeko |
| Wire or Wireless | Wire |
| Alarm Type | Rear Side |
| Guiding Line | Yes |
| Video Capture Resolution | 480p |
| Length of Video Cable | 6M |
| Power Mode | Room electrical/hard wiring |
| Operating Voltage | ≤36V (Camera: DC 12V/DC 12-24V; Monitor: DC12V/DC 9-35V) |
| Driving Position | Universal |
| Battery Properties | Without Battery |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
| High-concerned chemical | None |
5. Setup
5.1. General Installation Guidelines
- The camera is designed for universal fitment on various vehicles (cars, trucks, vans, SUVs, RVs).
- It is typically mounted at the rear of the vehicle, often near the license plate, to provide a clear view of the area behind the vehicle.
- The camera angle can be freely adjusted for optimal reversing picture accuracy.
5.2. Wiring Diagram for Monitor and Camera
The camera system requires connection to a compatible display (Android Player, MP5 Player, Car Monitor, or any display with an AV port) and the vehicle's reverse lights for automatic activation.
Monitor Connection (if using a separate monitor)
If you are connecting a dedicated monitor (not included), follow these steps:
- Connect the yellow video cable from the camera to the AV1 or AV2 input on your monitor.
- Connect the red power wire from the monitor to a DC 12V/DC 9-35V power source.
- Connect the black ground wire (GND) from the monitor to a suitable ground point on the vehicle.
- Connect the trigger wire (often labeled "Video 2 Reverse Prior" or similar) from the monitor to the positive wire of your vehicle's reverse lights. This enables automatic switching when reverse gear is engaged.
Camera Connection
The camera itself needs power and a video signal connection:
- Connect the camera's video output (yellow RCA connector) to the video input of your display unit (monitor, Android player, etc.).
- Connect the camera's red power wire to a DC 12V/DC 12-24V power source. It is recommended to connect this to the positive wire of your vehicle's reverse lights so the camera powers on only when reversing.
- Connect the camera's black ground wire (GND) to a suitable ground point on the vehicle.
5.3. Video Demonstration
Watch this video for a visual guide on the product and its components:
6. Operating Instructions
- Once properly installed and wired to your vehicle's reverse lights, the camera system will automatically activate when you shift your vehicle into reverse gear.
- The display connected to the camera will show the rear view, often with guiding lines to assist with parking and maneuvering.
- The camera features starlight night vision, providing a clear view even in low-light conditions without requiring additional illumination.
7. Maintenance
- Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners.
- Check all wiring connections periodically to ensure they remain secure and free from corrosion.
- Ensure the camera is securely mounted and not loose.
- The camera is waterproof, but avoid directing high-pressure water jets directly at the lens or housing.
8. Troubleshooting
- No image on screen / Black or blue screen:
- Confirm that both the monitor and camera are connected correctly and powered on normally.
- If the monitor powers on without video input, it may display a black or blue screen. This is normal. Ensure the camera is properly connected to the monitor's video input.
- Check all power and video cable connections for looseness or damage.
- Flickering or distorted image:
- Check for loose video cable connections.
- Ensure the power supply is stable and within the specified voltage range.
- Verify that the video system (PAL/NTSC) of the camera matches your display.
- Guiding lines not appearing:
- The camera is equipped with guiding lines. Ensure your display unit is compatible with displaying these lines.
9. User Tips
Based on general user feedback for similar products:
- For a cleaner installation, consider routing cables through existing grommets or drilling new holes with proper sealing.
- Test the camera functionality thoroughly before finalizing all cable routing and mounting.
- Adjust the camera angle carefully to get the best view of your vehicle's bumper and the area behind it.
10. Warranty & Support
For warranty information and technical support, please refer to the seller or the official product page where you purchased this item. Keep your purchase receipt as proof of purchase.
A PDF version of the user manual is available for download: User Manual (PDF)