EARU EAEMP3-100-TY-W

Contents

EARU EAEMP3-100-TY-W Smart Three Phase Energy Meter & Protector User Manual

Model: EAEMP3-100-TY-W | Brand: EARU

1. Introduction

The EARU EAEMP3-100-TY-W is a 100A WiFi Smart Three Phase Energy Meter and Protector designed for comprehensive energy monitoring and electrical protection. This device integrates advanced features such as over/under voltage protection, over/under current protection, delay protection, timer switch functionality, and imbalance alarms for both voltage and current. It also offers bidirectional energy monitoring and high-temperature protection, all controllable via the Tuya Smart Life app.

EARU Smart Three Phase Energy Meter with app interface showing voltage readings and bidirectional measurement.
Figure 1: Product Overview with App Integration

2. Main Functions

This smart energy meter and protector offers a wide range of functionalities to ensure electrical safety and efficient energy management:

  • Over Voltage Protection
  • Under Voltage Protection
  • Over Current Protection
  • Under Current Protection
  • Delay Protection
  • Timer Switch
  • Voltage Imbalance Protection
  • Current Imbalance Protection
  • Shortage Phase Protection
  • Phase Sequence Protection
  • High Temperature Protection
  • Bidirectional Energy Monitor

Each protection parameter can be configured with an action threshold and enabled/disabled as needed.

List of main functions of the EARU energy meter, including various protections and monitoring capabilities.
Figure 2: Main Functions List

3. Specifications

AttributeValue
Model NumberEAEMP3-100-TY-W
Rated VoltageAC380V
Frequency50Hz/60Hz
Max Operating Current80A - 99A
Accuracy Class±1%
Measuring Energy Range0-9999999.99kWh
Display TypeLCD
PhaseThree
Power SupplyAC
Power SourceAC
Operating Temperature-20℃~60℃
Dimensions90*77*75.5mm
Installation35MM Din Rail
Wiring CapacityInsulated copper wire of 35 mm² or below
Humidity<85%
AltitudeNot exceeding 2000m
Pollution LevelLevel 3
CertificationCE, FCC, RoHS
Table of product parameters including rated voltage, frequency, current, installation type, and working temperature.
Figure 3: Key Product Parameters
Diagram showing the dimensions of the energy meter: 90mm height, 77mm width, 75.5mm depth, and 35mm DIN rail installation.
Figure 4: Installation Wiring and Dimensions

4. Setup and Installation

4.1. Installation Conditions

  • Temperature: -20℃ to 60℃
  • Humidity: <85%
  • Altitude: Not exceeding 2000m
  • Pollution Level: Level 3
  • Installation: 35MM Din Rail
  • Wiring Capacity: Insulated copper wire of 35 mm² or below

4.2. Wiring Instructions

The protector must be wired according to the markings on the device and connected correctly. Refer to the wiring diagram below for proper connection.

Wiring diagram for the three-phase energy meter, showing L1, L2, L3, and N connections.
Figure 5: Wiring Diagram

4.3. App Connection (Tuya Smart Life)

To connect your device to the Tuya Smart Life app:

  1. Ensure the device is powered on and the WiFi indicator is flashing rapidly (searching for WiFi signal).
  2. Open the Tuya Smart Life app on your mobile phone.
  3. Tap "Add Device" or the "+" icon to start the device discovery process.
  4. Select "Energy meter" from the list of discovered devices or add manually.
  5. Enter your WiFi network information (SSID and password).
  6. Follow the on-screen prompts to complete the pairing process.

If the device does not connect automatically, long-press the third key on the screen (which shows voltage) for three seconds to enter WiFi connection mode.

Video 1: Demonstrating App Connection and Basic Operations

5. Operating Instructions

5.1. Display Navigation

Use the up (▲) and down (▼) buttons on the device to switch and display various parameters such as Voltage, Current, Power Consumption, Power Factor, and Frequency.

Screenshots of the energy meter display showing real-time current, voltage, power, power factor, and frequency for three phases.
Figure 6: Real-Time Display Parameters

5.2. Function Settings

To enter the setting mode:

  1. Long press and hold the setting button (gear icon) to enter the setting status display page. The set data bits will flash.
  2. Use the up (▲) and down (▼) buttons to adjust the content of the flashing bit.
  3. Short press the setting key to switch to the next setting bit.
  4. Short press the OK button to confirm the settings on the current page and move to the next settings page.
  5. Long press the OK button to exit the setting state and save all changes.

To configure WiFi from the device, long press the (▲) button on the "Voltage" interface. To clear power data, long press the (▼) button. To restore factory configuration, display the "Frequency Interface" and follow the instructions.

5.3. Alarm Settings

The device provides functional protection with automatic alarm activation after setting thresholds. The protection tripping switch can be turned on or off via the app.

App interface showing various alarm settings including upper/lower voltage/current limits, high temperature alarm, and imbalance alarms, with adjustable thresholds and tripping switches.
Figure 7: Alarm Setting Interface in App

Configurable alarm parameters and their default settings:

  • Upper Voltage Limit: 120-300V (Default: 275V)
  • Lower Voltage Limit: 80-210V (Default: 175V)
  • Upper Current Limit: 1-100A (Default: 80A)
  • Lower Current Limit: 1-100A (Default: 10A)
  • High Temperature Alarm: 10-85℃ (Default: 85℃)
  • Overcurrent Recovery Power-On Delay Time: 1-9999s (Default: 20s)
  • Overcurrent Event Threshold Time: 1-999s (Default: 5s)
  • Over and Under Voltage Event Recovery Power-On Delay Time: 1-9999s (Default: 20s)
  • Over and Under Voltage Event Time Threshold: 1-9999s (Default: 3s)
  • Three-Phase Current Imbalance Alarm: 10-100% (Default: 20%)
  • Voltage Three-Phase Imbalance Alarm: 10-100% (Adjustable)
  • Lost Current Recovery Delay Time: 1-9999s (Default: 20s)
  • Time Threshold of Lost Flow Event: 1-999s (Default: 10s)

Refer to the detailed function tables for specific parameter ranges and descriptions:

Table detailing current-related protection functions, set parameter ranges, factory default settings, and function descriptions.
Figure 8: Current Protection Settings
Table detailing voltage-related protection functions, set parameter ranges, factory default settings, and function descriptions.
Figure 9: Voltage Protection Settings
Table detailing imbalance and phase sequence protection functions, set parameter ranges, factory default settings, and function descriptions.
Figure 10: Imbalance and Phase Sequence Protection Settings

5.4. Timer and Schedule Functions

The device supports various timing modes for automated control of connected loads:

  • Countdown Mode: Set a timer for the device to turn off after a specified duration (e.g., turn off bedroom light after 10 minutes).
  • Timed Mode: Schedule specific on/off times (e.g., turn on living room light at 18:00).
  • Recurring Timer Mode: Set repeating schedules for daily or weekly operations (e.g., turn on living room light at 6:00 and turn off at 8:00).
Examples of countdown mode, timed mode, and recurring timer mode for smart home automation.
Figure 11: Timer and Schedule Modes

5.5. Energy Monitoring

Through the mobile app, you can view total electricity consumption, current, voltage, power, and historical data. The device also supports bidirectional measurement.

Mobile app interface showing electricity statistics, energy meter readings, and various data points like current, voltage, and temperature.
Figure 12: Mobile Phone Control and Data Viewing

5.6. Voice Control

The device is compatible with Amazon Alexa and Google Assistant, allowing for convenient voice control of your connected devices.

Illustration of voice control functionality with Amazon Alexa and Google Home devices.
Figure 13: Voice Control Integration

6. Maintenance and Precautions

  • This product has no isolation function. Always disconnect the front stage (main circuit breaker) when repairing the circuit breaker switch.
  • The zero line (N line) of this product is directly connected without a disconnection function.
  • The protector must be wired according to the markings and connected correctly.
  • Although this product has limited current protection, it cannot replace dedicated circuit breakers. Always install appropriate circuit breakers (such as DZ47 or C65) at the front or end of the line for short circuit protection.
  • Before use, ensure all clamp screws are tightened to prevent product damage due to poor connection.

7. Troubleshooting

7.1. Fault Record

The device records instances of overvoltage, undervoltage, overload, low current protection, voltage imbalance, current imbalance, and phase sequence protection. These records can be viewed in the Tuya app.

7.2. WiFi Indicator Status

  • Flashing rapidly: Indicates the device is searching for a WiFi signal.
  • Slow flashing: Indicates WiFi is offline.
  • Solid light: Indicates WiFi is connected.

7.3. Power Failure Indication

When a power failure protection event occurs, the device screen will display in red.

Energy meter display showing a red screen indicating power failure protection.
Figure 14: Power Failure Protection Display

8. User Tips

  • It is recommended to perform initial tests of the device's functions before full installation to ensure proper operation and safety.
  • The device is designed for 380V systems, confirming its compatibility for such applications.

9. Warranty and Support

9.1. Warranty

Within 12 months from the date of production, if there are any product quality issues and the seal is intact, the factory will provide free replacement. Within 36 months, if there are product quality issues and the seal is intact, the factory will provide free repair.

9.2. Manufacturer Contact

ZHEJIANG EARU ELECTRONICS CO.,LTD.

  • Address: YAMING ROAD 38, XIANGYANG INDUSTRY AREA, LIUSHI TOWN, YUEQING CITY, ZHEJIANG PROVINCE, CHINA
  • Website: https://cnoyou.en.alibaba.com/
  • Manager: Bob Wu
  • Email: bob@earuelec.com
  • Phone Number: +86 15821639630
  • WeChat ID: totybest-2
WeChat QR code for customer support.
Figure 15: WeChat QR Code for Support

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.