1. Introduction
Thank you for choosing the LiitoKala Lii-500 Smart Universal LCD Battery Charger. This high-end smart charger is designed with advanced features to efficiently and safely charge a wide range of cylindrical lithium-ion and nickel-hydrogen batteries.
Key functionalities include 4-channel independent charging, battery capacity detection, internal resistance measurement, and multiple protection mechanisms. Its versatility makes it suitable for various electronic products, offering safe operation and powerful functionality for both home and travel use.
2. Safety Warnings
Please read all safety instructions carefully before use to prevent injury or damage to the product.
- This charger is designed exclusively for cylindrical lithium-ion and nickel-hydrogen (Ni-MH/Ni-Cd) batteries. Do NOT attempt to charge lithium iron phosphate (LiFePO4) batteries or any other battery types not specified.
- Always refer to this instruction manual for recommended charging currents. Do NOT exceed the recommended current for any rechargeable battery.
- Use ONLY the supplied power adapter. Using other adapters may cause damage or malfunction.
- The charger may generate heat during charging and discharging. Exercise caution to avoid burns.
- Always unplug the power supply and remove batteries when the charger is not in use.
- This product is intended for indoor use only, under normal environmental conditions.
- The testing data provided by this product is for reference purposes only. For precise measurements, consult professional instruments.
- Important Note: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
3. Product Features
- Charging Current Adjustment: Offers four charging current options: 300mA, 500mA, 700mA, and 1000mA.
- Wide Battery Compatibility: Can charge various battery specifications simultaneously, including 18650, 26650, 14500, AA, AAA, and more.
- Independent LCD Display: A clear LCD screen displays essential parameters such as voltage (V), current (mA), time (h), capacity (mAh), and internal resistance (mR) for each channel.
- Multiple Operating Modes: Supports CHARGE, FAST TEST (rapid capacity detection), and NOR TEST (normal capacity detection) modes, which can operate simultaneously and independently.
- Comprehensive Protection: Includes overcharge/overdischarge, short circuit, temperature control, 0V voltage activation, 1.65V-2.2V no-charge function, intelligent identification of bad batteries, and reverse polarity detection.
- USB 5V Output: Provides a standard 5V/1000mA USB output function, allowing the charger to act as a power bank for 3.7V lithium batteries. (Note: Ni-MH batteries do not support USB output).
- Dedicated Power Adapter: Equipped with a DC 12V/2A power adapter for optimal performance.





4. Setup Guide
4.1. Package Contents
- 1 * LiitoKala Lii-500 Battery Charger
- 1 * Power Adapter (EU/US/UK Plug - Note: Adapter type may vary or be excluded based on purchase option.)
- 1 * User Manual (English & Chinese)



4.2. Connecting Power
- Connect the supplied 12V/2A power adapter to the DC 12V input port on the back of the charger.
- Plug the power adapter into a standard wall outlet.
- Upon successful connection, all LCD screens on the charger will momentarily light up. If no battery is inserted, the display will show "Null".
4.3. Inserting Batteries
- Carefully insert cylindrical Li-ion or Ni-MH/Ni-Cd batteries into the charging slots.
- Ensure correct polarity (+/-) by aligning the battery terminals with the markings in the slots.
- The charger will automatically measure the internal resistance of the battery within approximately 3 seconds and then enter the default CHARGE mode.
5. Operating Instructions
5.1. Buttons Overview
- MODE: Used to select the operating mode (CHARGE, FAST TEST, NOR TEST).
- CURRENT: Used to select the charging/discharge current.
- 1, 2, 3, 4: Individual buttons for each channel, used for independent selection and viewing data.
5.2. Display Schematic

The LCD display provides real-time information:
- Channel Indicators: 1, 2, 3, 4
- Charge Mode: CHARGE, FAST TEST, NOR TEST
- Voltage Display: V (Volts)
- Current Display: mA (milliamperes)
- Capacity Display: mAh (milliampere-hours)
- Time Display: h (hours)
- Internal Resistance Display: mR (milliohms)
- USB Output Indicator: USB Output
- Work End Indicator: End
5.3. Mode Selection
- To change the operating mode, press and hold the MODE button for 3 seconds.
- Within 8 seconds, lightly press the MODE button again to cycle through CHARGE, FAST TEST, and NOR TEST modes.
- Once the desired mode is selected, the charger will enter the working state after 8 seconds if no further input.
5.4. CHARGE Mode (Charging)
- After inserting a battery, the charger defaults to CHARGE mode with a 500mA current.
- Within 8 seconds of battery insertion, press the CURRENT button to select your desired charging current: 300mA, 500mA, 700mA, or 1000mA. The system will lock this current after 8 seconds.
- If you need to change the current or other functions after the 8-second window, long press the MODE button to re-enter selection.
- In CHARGE mode, you can lightly press the 1, 2, 3, or 4 buttons to view the charging capacity (mAh), charging time (h), battery internal resistance (mR), charging current (mA), and voltage (V) for that specific channel.
- When the battery is fully charged, the display will show "End".
5.5. FAST TEST Mode (Rapid Capacity Testing)
This mode quickly detects battery capacity by first discharging the battery and then fully charging it, recording the discharged capacity.
- After connecting the charger and inserting a battery, gently press the MODE button within 8 seconds to select the FAST TEST mode.
- Press the CURRENT button to choose the desired current. The system will lock your selection after 8 seconds.
- Discharge Current: If you selected a charging current of 300mA or 500mA, the system automatically discharges at 250mA. If you selected 700mA or 1000mA, it discharges at 500mA.
- After discharge, the charger will fully charge the battery and display the detected capacity.
5.6. NOR TEST Mode (Normal Capacity Testing)
This mode provides a more thorough capacity detection by performing a full charge, then discharge, and then another full charge, recording the discharged capacity.
- After connecting the charger and inserting a battery, gently press the MODE button within 8 seconds to select the NOR TEST mode. Alternatively, you can long press the MODE button for 2 seconds in any state to enter NOR TEST mode.
- Press the CURRENT button to choose the desired current (300mA, 500mA, 700mA, or 1000mA). The system will lock your selection after 8 seconds. If no setting is made, it defaults to 500mA for charging.
- Process: The battery is fully charged, then discharged (discharge current is automatically selected based on the charging current), and then fully charged again. The discharged capacity is recorded as the battery's actual capacity.
- When the capacity detection is complete, the charger will charge the battery again at the previously selected current until it is fully charged.
5.7. USB 5V Output (Power Bank Function)
The charger can provide a 5V/1000mA USB output, effectively turning it into a power bank.
- This function is only compatible with 3.7V lithium batteries. Ni-MH batteries cannot be used for USB output.
- Any of the four battery slots can be used for USB output. For optimal stability, it is recommended to have batteries in at least two slots.
- To activate USB output, ensure batteries are inserted and the charger is powered on.

6. Maintenance
- Keep the charger clean and dry. Avoid exposure to moisture or liquids.
- Do not use abrasive cleaners, solvents, or harsh chemicals to clean the charger. Use a soft, dry cloth.
- Store the charger in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Ensure adequate ventilation around the charger during operation to prevent overheating.
- Regularly inspect the power adapter and cable for any signs of damage.
7. Troubleshooting
- "Null" Display: If the LCD displays "Null", it indicates either no battery is inserted or a damaged/unsupported battery has been placed in the slot.
- Charger Heats Up During Operation: It is normal for the charger to generate some heat during the charging and discharging processes. Ensure it is placed in a well-ventilated area.
- Battery Not Charging:
- Verify that the battery type is compatible (Li-ion or Ni-MH/Ni-Cd only).
- Check for correct battery insertion and polarity.
- Ensure the power adapter is securely connected to both the charger and the power outlet.
- The battery itself might be defective or completely discharged (0V activation function may attempt to revive, but not always successful).
- USB Output Not Working:
- Confirm that 3.7V Li-ion batteries are inserted. Ni-MH batteries do not support the USB power bank function.
- Ensure the inserted Li-ion batteries have sufficient charge.
8. Specifications
| Feature | Specification |
|---|---|
| Input Voltage | DC 12V/2.0A |
| Li-ion Charging Current | 4.2V, 300mA/500mA/700mA/1000mA |
| Ni-MH Charging Current | 1.48V, 300mA/500mA/700mA/1000mA |
| Discharge Current | 250mA, 500mA |
| USB Output | 5V/1A (1000mA) |
| Termination Method | Intelligent voltage monitoring |
| Compatible Li-ion Batteries (3.7V) | 26650, 22650, 18650, 18490, 17670, 17500, 17355, 16340, 14500, 10440 |
| Compatible Ni-MH/Ni-Cd Batteries | AA, AAA, A, SC |
| Dimensions (L x W x H) | 162mm x 96mm x 36mm |
| Output Power | ≤37.5W |
| Voltage Range | Low voltage non-USB (below 75V DC, below 50V AC) |
| Data Transmission | USB |
| Power Source | External DC Adapter |
| Output Interface | USB |
| Display Screen | Yes |
| Intelligent Charge | Yes |
| Quick Charge | Yes |
| Type | Electric, USB |
| Certification | NONE |


9. User Tips
- Adapter Inclusion: Be aware that some packages for the Lii-500 may not include a power adapter. Please verify your specific purchase details.
- Normal Heat Generation: It is normal for the charger to generate some heat during both charging and discharging cycles. This is part of its normal operation. Always ensure the charger has adequate ventilation.
- Effective Capacity Testing: The capacity test features (FAST TEST and NOR TEST) are highly valuable for assessing the actual health and remaining capacity of older batteries, such as those salvaged from laptop packs.
- Read the Manual Thoroughly: To fully utilize all the advanced features and ensure safe operation, take the time to read and understand the entire user manual, especially the different operating modes and current selection options.
10. Warranty and Support
For detailed support, troubleshooting, and warranty information, please refer to the comprehensive user manual PDF available online: