Introduction
Thank you for choosing a Midea Ice Maker. This manual provides essential information for the safe and efficient operation of your new appliance. Please read it thoroughly before use and keep it for future reference. Our ice makers are designed for convenience, offering fast ice production and easy maintenance.
For a detailed PDF version of this manual, please refer to the official document: Midea Ice Maker User Manual (PDF).
Setup and Installation
Unpacking
Carefully remove the ice maker from its packaging. Ensure all packing materials are removed before use. Verify that all components, including the ice scoop and removable basket, are present and undamaged.
Placement
- Place the ice maker on a flat, stable surface.
- Ensure adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
- Keep the unit away from water sources to prevent electrical hazards.
Initial Cleaning
Before first use, clean the interior of the ice maker, including the water reservoir and ice basket, with a mild detergent and warm water. Rinse thoroughly and dry with a soft cloth.
Water Filling
Open the water reservoir cover and fill with potable water up to the maximum fill line. Do not overfill.
Operating Instructions
Power On/Off
Plug the ice maker into a grounded electrical outlet. Press the Power button to turn the unit on or off.
Ice Production
Once powered on and water is added, the ice maker will automatically begin the ice-making cycle. The unit features "Fast-ice making" capabilities:
- Bullet Ice Makers (13KG/15KG): Produce bullet-shaped ice cubes in approximately 6 minutes per cycle. Offers 2 sizes of bullet ice.
- Nugget Ice Maker (15KG): Produces chewable nugget ice in 6-10 minutes per round. This ice is made from crushed ice cut with blades, offering a brittle texture that retains flavor.
Indicators
The digital display will show indicators for:
- "Ice Full": The unit will automatically shut off when the ice basket is full.
- "Add Water": The unit will indicate when the water reservoir needs refilling.
Ice Basket Features
Midea ice makers come with a removable basket for easy ice retrieval. Some models feature an "Innovative boost ice basket" which expands downward as more ice is produced, providing more storage space and preventing ice from contacting the water. This design allows for increased ice storage capacity (e.g., from 1.3L water capacity / 1.0lb ice storage to 1.2L water capacity / 1.6lb ice storage, and ice basket depth from 64mm to 128mm).
Low Noise Operation
Your Midea Ice Maker is designed for low-noise operation, ensuring minimal disturbance to your daily routine.
Maintenance and Cleaning
Self-Cleaning Function
Both Bullet and Nugget ice maker models include a self-cleaning function. Refer to your specific model's instructions for activating this feature. This function helps maintain hygiene and prolong the life of your appliance.
Regular Cleaning
- Regularly clean the water reservoir and ice basket. The ice basket is removable for easy cleaning.
- Wipe down the exterior with a soft, damp cloth.
- Ensure the unit is unplugged before any cleaning procedure.
- Do not use abrasive cleaners or solvents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| "Add Water" indicator is on. | Water reservoir is empty or water level is too low. | Refill the water reservoir with potable water up to the MAX fill line. |
| "Ice Full" indicator is on. | Ice basket is full. | Remove ice from the basket. The unit will resume ice production automatically. |
| Ice maker is not producing ice. | No power, insufficient water, or unit malfunction. | Check power connection. Ensure water reservoir is filled. If problem persists, contact customer support. |
| Ice cubes are too small or misshapen. | Water temperature too high, or mineral buildup. | Use colder water. Perform a self-cleaning cycle or manual cleaning to remove mineral deposits. |
Specifications
General Features:
- Fast-ice making: Produces ice quickly.
- Auto-shut off: Automatically stops when ice is full.
- Ice full indication: Visual alert when ice basket is full.
- Ice scoop included with holder: Convenient ice retrieval and storage.
- Digital display: For easy monitoring and control.
- Auto cleaning: Simplifies maintenance.
- Removable basket: For easy cleaning and ice access.
- Large R-angle design interior: Optimized for ice production and cleaning.
- Double layer plastic ice bucket: Enhanced insulation and durability.
- 304 Stainless Steel Food Contact Grade Evaporator: Ensures hygiene and prevents detachment issues common with copper-nickel plating.
- No Condensation Risk: Special structural design and double-layer ice basket reduce condensation.
- Enhanced Fire Resistance: Constructed with 5VA raw material, showing no fire spread after 20 minutes of exposure, compared to competitors' V-0 material which spreads fire in 5 minutes.
Nugget Ice Maker (15KG Model)
| Feature | Detail |
|---|---|
| Daily Ice Production | 15kg (33lbs) |
| Dimension (W*D*H) | 221*321*329 mm |
| Packing Size (W*D*H) | 263*376*369 mm |
| Ice Storage Capacity | 2.2lbs |
| Water Capacity | 1.7L |
| Ice Making Time | 6-10 minutes |
| Ice Type | Chewable Nugget Ice (5x5x10mm) |
Bullet Ice Maker (13KG/15KG Models)
| Feature | Detail |
|---|---|
| Daily Ice Production | 13kg (28.6lbs) / 15kg (33lbs) |
| Dimension (W*D*H) | 250*315*283 mm |
| Packing Dimensions (W*D*H) | 292*370*329 mm |
| Ice Qty/circle | 10pcs/10pcs |
| Ice Storage Capacity | 1.5lbs |
| Water Capacity | 2.0L |
| Ice Making Time | 6 minutes/cycle |
| Control Type | Electronic |
| Ice Type | Bullet Ice (20x20x25mm S / 25x25x30mm L) |
User Tips
- For optimal ice production, use cold, filtered water.
- Regularly empty the ice basket to prevent ice from melting and refreezing into a solid block.
- Ensure the unit has proper clearance on all sides for efficient heat dissipation.
- If you notice a strange taste in your ice, perform a thorough cleaning cycle.
Warranty and Support
Midea products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please contact your local Midea customer service center or refer to the official Midea website.
Please have your model number and purchase date available when contacting support.