TUMMASTER S400PRO

Contents

TUMMASTER S400PRO MINI Portable PC Case User Manual

Model: S400PRO

Brand: TUMMASTER

1. Introduction

This manual provides detailed instructions for the assembly, installation, and maintenance of your TUMMASTER S400PRO MINI Portable PC Case. Designed for Mini-ITX systems, this compact case offers excellent portability and efficient cooling solutions. Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation.

2. Safety Information

Always observe the following safety precautions:

  • Ensure all power is disconnected from components before installation or maintenance.
  • Handle components with care to avoid damage from static electricity.
  • Keep small parts away from children.
  • Do not attempt to modify the case structure, as this may compromise its integrity and void any warranties.
  • Ensure adequate ventilation around the assembled PC to prevent overheating.

3. Package Contents

Please verify that all components are present:

  • TUMMASTER S400PRO MINI Portable PC Case
  • Accessory kit (screws, standoffs, cable ties)
  • User Manual (this document, also available as PDF: View PDF)

Note: Other PC components such as motherboard, CPU, GPU, PSU, and fans are sold separately and are not included with the case.

4. Specifications

Product specifications table and dimensions diagram

Figure 4.1: Product Specifications and Dimensions

TUMMASTER S400/S400PRO Specifications
Feature Description
Model S400/S400PRO
Color Options Black, White
Material Aluminum alloy, Steel (SPCC+Aluminum alloy plate)
Hard Drive Support 3 x 2.5" SSD, 1 x 3.5" HDD (if graphics card length < 25mm)
Supported Mainboard Mini-ITX, ITX (17cm x 17cm)
PCI Slots 3
Front I/O (S400PRO) POWER, 2x USB 2.0, 2x USB 3.0, 1x Type-C, 1x AUX
Front I/O (S400) POWER, 2x USB 2.0, 1x USB 3.0, 1x AUX
Power Supply Support SFX/SFX-L (100-125mm length)
Max CPU Cooler Height 67mm
Max Graphics Card Length 335x154x65mm (3.2 slot)
Max Graphics Card Length (with 3.5" HDD) 225x154x65mm
Max Graphics Card Length (with 120mm water-cooling) 200x154x65mm
Case Dimensions (LxWxH) 340mm x 156mm x 205mm
Net Weight 2.35kg
Radiator Size Support 120mm
Power Supply Included No
Fans Included No
Side Panel Window No
RGB Support NO RGB (Case itself)
Chassis Type Desktops (Vertical)

5. Setup and Installation

The TUMMASTER S400PRO is designed for compact Mini-ITX builds. Careful planning and assembly are recommended.

5.1. Overview of Internal Layout

Installation Instruction diagram showing right side components: SFX PSU, 2.5 inch HDD, ITX mainboard, CPU cooler area, and fan placements.

Figure 5.1: Right Side Internal Layout

Installation Instruction diagram showing left side components: Graphics card area and 120mm water cooler area, and fan placements.

Figure 5.2: Left Side Internal Layout

5.2. Motherboard Installation

  • The case supports ITX and Mini-ITX motherboards (17cm x 17cm).
  • Install the motherboard onto the designated standoffs.
  • Secure with screws provided in the accessory kit.
Diagram highlighting the ITX mainboard installation area.

Figure 5.3: ITX Mainboard Area

5.3. CPU Cooler Installation

  • The maximum supported CPU cooler height is 67mm.
  • Install your chosen CPU cooler according to its manufacturer's instructions.
Image showing an installed CPU cooler and fan inside the case.

Figure 5.4: Installed CPU Cooler

Image showing an installed CPU cooler and fan inside the case with RGB lighting.

Figure 5.5: CPU Cooler with RGB Fan

5.4. Power Supply (PSU) Installation

  • The case supports SFX/SFX-L power supplies with a length of 100-125mm.
  • Mount the SFX PSU in its designated area as shown in the diagrams.
Diagram highlighting the SFX PSU installation area.

Figure 5.6: SFX Power Supply Area

5.5. Graphics Card Installation

  • The case supports graphics cards up to 335mm in length, 154mm in width, and 65mm (3.2 slot) in height.
  • Note the length limitations if installing a 3.5" HDD (225mm) or 120mm water cooling (200mm).
  • A PCIe riser cable is required for graphics card installation (not included).
Image showing a graphics card installed inside the case.

Figure 5.7: Installed Graphics Card

5.6. Storage Installation

  • The case supports up to three 2.5" SSDs.
  • One 3.5" HDD can be installed, but this will reduce the maximum supported graphics card length to 225mm.

5.7. Cooling System (Fans & Water Cooling)

  • The case supports two 12015 fans on the top and one 9015 fan on the bottom for optimal airflow.
  • A 120mm water cooler can be installed, but this will reduce the maximum supported graphics card length to 200mm and may require a separate bracket.
Diagram showing the installation area for a 120mm water cooler.

Figure 5.8: 120mm Water Cooler Area

Image illustrating improved heat dissipation through the mesh panel.

Figure 5.9: Mesh Panel for Enhanced Cooling

5.8. Front I/O Connections

  • Connect the front panel cables (POWER, USB 2.0, USB 3.0, Type-C, AUX) to the corresponding headers on your motherboard.
Front view of the S400PRO computer case in white, showing the I/O ports.

Figure 5.10: S400PRO Front I/O Ports

6. Operating Instructions

Once all components are securely installed and connected:

  1. Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports.
  2. Connect the power cable to the PSU and a wall outlet.
  3. Flip the power switch on the PSU to the 'ON' position.
  4. Press the power button on the front of the case to start your PC.

Video 6.1: Product overview and assembly demonstration.

7. Maintenance

  • Cleaning: Regularly clean the exterior of the case with a soft, dry cloth. For the mesh panels, use a soft brush or compressed air to remove dust.
  • Internal Dust: Periodically open the case (after disconnecting power) and use compressed air to remove dust from internal components and fans to maintain optimal cooling performance.
  • Cable Management: Ensure cables are neatly routed to avoid obstructing airflow.

8. Troubleshooting

  • PC not powering on: Check all power connections, including the PSU switch, wall outlet, and internal power cables to the motherboard and components. Ensure the front panel power button cable is correctly connected to the motherboard.
  • Overheating: Verify that all fans are spinning correctly and are not obstructed. Ensure proper airflow direction. Check CPU cooler and GPU heatsink for dust buildup.
  • Graphics card not detected: Ensure the graphics card is fully seated in the PCIe slot and the PCIe riser cable (if used) is correctly installed and functional. Check power connections to the GPU.
  • USB ports not working: Verify that the front panel USB cables are correctly connected to the motherboard headers.

9. User Tips

  • GPU Compatibility: This case is well-suited for ITX systems requiring longer GPUs, but always double-check the dimensions against the case's maximum limits, especially if installing additional components like a 3.5" HDD or 120mm water cooler.
  • Assembly Challenge: Due to its Small Form Factor (SFF) design, assembly can be challenging. Take your time and refer to the installation diagrams.
  • Additional Cooling: Consider installing two thin fans on the top panel for enhanced cooling performance.
  • PCIe Riser: Remember that the PCIe riser cable is not included with the case and must be purchased separately if you require PCIe Gen 4 or 5 functionality.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's official website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

For additional documentation, please refer to the official user manual PDF: TUMMASTER S400PRO User Manual (PDF).

© 2024 TUMMASTER. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.